CVE-2024-53169

Published Dec 27, 2024

Last updated 9 months ago

CVSS medium 4.7

Overview

Description
In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: fix kernel crash while shutting down controller The nvme keep-alive operation, which executes at a periodic interval, could potentially sneak in while shutting down a fabric controller. This may lead to a race between the fabric controller admin queue destroy code path (invoked while shutting down controller) and hw/hctx queue dispatcher called from the nvme keep-alive async request queuing operation. This race could lead to the kernel crash shown below: Call Trace: autoremove_wake_function+0x0/0xbc (unreliable) __blk_mq_sched_dispatch_requests+0x114/0x24c blk_mq_sched_dispatch_requests+0x44/0x84 blk_mq_run_hw_queue+0x140/0x220 nvme_keep_alive_work+0xc8/0x19c [nvme_core] process_one_work+0x200/0x4e0 worker_thread+0x340/0x504 kthread+0x138/0x140 start_kernel_thread+0x14/0x18 While shutting down fabric controller, if nvme keep-alive request sneaks in then it would be flushed off. The nvme_keep_alive_end_io function is then invoked to handle the end of the keep-alive operation which decrements the admin->q_usage_counter and assuming this is the last/only request in the admin queue then the admin->q_usage_counter becomes zero. If that happens then blk-mq destroy queue operation (blk_mq_destroy_ queue()) which could be potentially running simultaneously on another cpu (as this is the controller shutdown code path) would forward progress and deletes the admin queue. So, now from this point onward we are not supposed to access the admin queue resources. However the issue here's that the nvme keep-alive thread running hw/hctx queue dispatch operation hasn't yet finished its work and so it could still potentially access the admin queue resource while the admin queue had been already deleted and that causes the above crash. The above kernel crash is regression caused due to changes implemented in commit a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()"). Ideally we should stop keep-alive before destroyin g the admin queue and freeing the admin tagset so that it wouldn't sneak in during the shutdown operation. However we removed the keep alive stop operation from the beginning of the controller shutdown code path in commit a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()") and added it under nvme_uninit_ctrl() which executes very late in the shutdown code path after the admin queue is destroyed and its tagset is removed. So this change created the possibility of keep-alive sneaking in and interfering with the shutdown operation and causing observed kernel crash. To fix the observed crash, we decided to move nvme_stop_keep_alive() from nvme_uninit_ctrl() to nvme_remove_admin_tag_set(). This change would ensure that we don't forward progress and delete the admin queue until the keep- alive operation is finished (if it's in-flight) or cancelled and that would help contain the race condition explained above and hence avoid the crash. Moving nvme_stop_keep_alive() to nvme_remove_admin_tag_set() instead of adding nvme_stop_keep_alive() to the beginning of the controller shutdown code path in nvme_stop_ctrl(), as was the case earlier before commit a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()"), would help save one callsite of nvme_stop_keep_alive().
Source
416baaa9-dc9f-4396-8d5f-8c081fb06d67
NVD status
Analyzed
Products
linux_kernel

Risk scores

CVSS 3.1

Type
Primary
Base score
4.7
Impact score
3.6
Exploitability score
1
Vector string
CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Severity
MEDIUM

Weaknesses

nvd@nist.gov
NVD-CWE-noinfo

Social media

Hype score
Not currently trending

  1. CVE-2024-53169 In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: fix kernel crash while shutting down controller The nvme keep-alive operation, whi… https://t.co/L7WmX45gug

    @CVEnew

    27 Dec 2024

    203 Impressions

    0 Retweets

    0 Likes

    0 Bookmarks

    0 Replies

    0 Quotes

Configurations

Related CVEs

  1. In the Linux kernel, the following vulnerability has been resolved: ibmveth: Disable GSO for packets with small MSS Some physical adapters on Power systems do not support segmentation offload when the MSS is less than 224 bytes. Attempting to send such packets causes the adapter to freeze, stopping all traffic until manually reset. Implement ndo_features_check to disable GSO for packets with small MSS values. The network stack will perform software segmentation instead. The 224-byte minimum matches ibmvnic commit <f10b09ef687f> ("ibmvnic: Enforce stronger sanity checks on GSO packets") which uses the same physical adapters in SEA configurations. The issue occurs specifically when the hardware attempts to perform segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets (gso_segs == 1) do not trigger the problematic LSO code path and are transmitted normally without segmentation. Add an ndo_features_check callback to disable GSO when MSS < 224 bytes. Also call vlan_features_check() to ensure proper handling of VLAN packets, particularly QinQ (802.1ad) configurations where the hardware parser may not support certain offload features. Validated using iptables to force small MSS values. Without the fix, the adapter freezes. With the fix, packets are segmented in software and transmission succeeds. Comprehensive regression testing completedd (MSS tests, performance, stability).•CVE-2026-46273
  2. In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etr: Fix race condition between sysfs and perf mode When trying to run perf and sysfs mode simultaneously, the WARN_ON() in tmc_etr_enable_hw() is triggered sometimes: WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] [..snip..] Call trace: tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] coresight_enable_path+0x1c8/0x218 [coresight] coresight_enable_sysfs+0xa4/0x228 [coresight] enable_source_store+0x58/0xa8 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2c8/0x388 ksys_write+0x74/0x108 __arm64_sys_write+0x24/0x38 el0_svc_common.constprop.0+0x64/0x148 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Since the enablement of sysfs mode is separeted into two critical regions, one for sysfs buffer allocation and another for hardware enablement, it's possible to race with the perf mode. Fix this by double check whether the perf mode's been used before enabling the hardware in sysfs mode. mode: [sysfs mode] [perf mode] tmc_etr_get_sysfs_buffer() spin_lock(&drvdata->spinlock) [sysfs buffer allocation] spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() drvdata->etr_buf = etr_perf->etr_buf spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at the perf side spin_unlock(&drvdata->spinlock) With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf. This ensures we verify whether the perf mode's already running before we actually allocate the buffer. Then we can save the time of allocating/freeing the sysfs buffer if race with the perf mode.•CVE-2026-46272
  3. In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: do WoW offloads only on primary link In case of multi-link connection, WCN7850 firmware crashes due to WoW offloads enabled on both primary and secondary links. Change to do it only on primary link to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1•CVE-2026-46271
  4. In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.•CVE-2026-46270
  5. In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree When probing the k230 pinctrl driver, the kernel triggers a NULL pointer dereference. The crash trace showed: [ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068 [ 0.740737] ... [ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc In k230_pinctrl_parse_functions(), we attempt to retrieve the device pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized after k230_pinctrl_parse_dt() completes. At the time of DT parsing, info->pctl_dev is still NULL, leading to the invalid dereference of info->pctl_dev->dev. Use the already available device pointer from platform_device instead of accessing through uninitialized pctl_dev.•CVE-2026-46269

References

Sources include official advisories and independent security research.