CVE-2025-37901

Published May 20, 2025

Last updated 7 months ago

Overview

Description
In the Linux kernel, the following vulnerability has been resolved: irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not have a corresponding MPM pin and should not be handled inside the MPM driver. The IRQ domain hierarchy is always applied, so it's required to explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but irq-qcom-mpm is currently missing the check. This is causing crashes when setting up interrupts for non-wake GPIOs: root@rb1:~# gpiomon -c gpiochip1 10 irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1 Unable to handle kernel paging request at virtual address ffff8000a1dc3820 Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT) pc : mpm_set_type+0x80/0xcc lr : mpm_set_type+0x5c/0xcc Call trace: mpm_set_type+0x80/0xcc (P) qcom_mpm_set_type+0x64/0x158 irq_chip_set_type_parent+0x20/0x38 msm_gpio_irq_set_type+0x50/0x530 __irq_set_trigger+0x60/0x184 __setup_irq+0x304/0x6bc request_threaded_irq+0xc8/0x19c edge_detector_setup+0x260/0x364 linereq_create+0x420/0x5a8 gpio_ioctl+0x2d4/0x6c0 Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that MPM is removed entirely from the hierarchy for non-wake GPIOs.
Source
416baaa9-dc9f-4396-8d5f-8c081fb06d67
NVD status
Analyzed
Products
linux_kernel, debian_linux

Risk scores

CVSS 3.1

Type
Primary
Base score
5.5
Impact score
3.6
Exploitability score
1.8
Vector string
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Severity
MEDIUM

Weaknesses

nvd@nist.gov
NVD-CWE-noinfo

Social media

Hype score
Not currently trending

Configurations

  1. In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etr: Fix race condition between sysfs and perf mode When trying to run perf and sysfs mode simultaneously, the WARN_ON() in tmc_etr_enable_hw() is triggered sometimes: WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] [..snip..] Call trace: tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] coresight_enable_path+0x1c8/0x218 [coresight] coresight_enable_sysfs+0xa4/0x228 [coresight] enable_source_store+0x58/0xa8 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2c8/0x388 ksys_write+0x74/0x108 __arm64_sys_write+0x24/0x38 el0_svc_common.constprop.0+0x64/0x148 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Since the enablement of sysfs mode is separeted into two critical regions, one for sysfs buffer allocation and another for hardware enablement, it's possible to race with the perf mode. Fix this by double check whether the perf mode's been used before enabling the hardware in sysfs mode. mode: [sysfs mode] [perf mode] tmc_etr_get_sysfs_buffer() spin_lock(&drvdata->spinlock) [sysfs buffer allocation] spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() drvdata->etr_buf = etr_perf->etr_buf spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at the perf side spin_unlock(&drvdata->spinlock) With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf. This ensures we verify whether the perf mode's already running before we actually allocate the buffer. Then we can save the time of allocating/freeing the sysfs buffer if race with the perf mode.CVE-2026-46272