CVE-2026-13481

Published Aug 26, 2026

Last updated 9 days ago

CVSS medium 5.4

Overview

Description
The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id. In tlv_mgmt_post_recv(), the PTP_MGMT_TIME case casts mgmt_tlv->data to a 10-byte struct ptp_timestamp and reads it (then byte-swaps and writes it back) without first checking that the TLV data field is at least sizeof(struct ptp_timestamp). Every sibling management id in the same switch validates its length first; PTP_MGMT_TIME was the only case lacking that check. The length passed in is the management data size (tlv->length - 2), and the upstream guard in ptp_tlv_post_recv() only requires tlv->length > 2, while msg_tlv_post_recv() validates only that the TLV fits within the received byte count, not a per-id minimum. A peer on the local PTP segment can therefore send a PTP_MSG_MANAGEMENT message carrying a short PTP_MGMT_TIME TLV (data as small as 2 bytes), causing the parser to read and write 8 bytes beyond the validated data. The message type and TLV contents are taken straight off the wire, so the path is reachable by any adjacent attacker when CONFIG_PTP is enabled. The over-read and write-back stay within the struct ptp_msg allocation (mgmt_tlv->data lives in the leading mtu[NET_ETH_MTU] union member, so data + 10 lands at most a few bytes past mtu[], inside the same object), so this is an out-of-bounds read of adjacent in-object memory plus a bounded in-place corruption of the message's parsed timestamp, not past-allocation memory corruption. Impact is limited to minor information exposure of adjacent bytes and corruption of the device's parsed management TIME value; there is no crash on the access and no reachable reference-count corruption. The fix adds if (length < sizeof(struct ptp_timestamp)) { return -EBADMSG; } before the cast, matching the other management-id cases and fully closing the receive-path defect.
Source
vulnerabilities@zephyrproject.org
NVD status
Analyzed
Products
zephyr

Risk scores

CVSS 3.1

Type
Secondary
Base score
5.4
Impact score
2.5
Exploitability score
2.8
Vector string
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N
Severity
MEDIUM

Weaknesses

vulnerabilities@zephyrproject.org
CWE-125

Social media

Hype score
Not currently trending

Configurations

Related CVEs

  1. The LoRaWAN TS004 Fragmented Data Block Transport handler frag_transport_package_callback() in subsys/lorawan/services/frag_transport.c parses downlink command bytes without validating that enough payload bytes remain before each access. The loop's only bound is rx_pos < len; after consuming the one-byte command id the handler cast rx_buf + rx_pos to a 10-byte struct frag_transport_setup_req, and for a DATA_FRAGMENT command passed &rx_buf[rx_pos] to the fragment decoder, which reads exactly ctx.frag_size bytes — with no remaining-length check in either case. The fragment size is attacker-chosen in a preceding FRAG_SESSION_SETUP command (ctx.frag_size = req->frag_size, capped at CONFIG_LORAWAN_FRAG_TRANSPORT_MAX_FRAG_SIZE, default 232). rx_buf aliases the 255-byte static MacCtx.RxPayload buffer in the loramac-node MAC layer, while len is the actual decrypted payload length. By padding a downlink with mismatched-index DATA_FRAGMENT filler commands (each advancing rx_pos by three bytes without producing an answer) and appending one matching-index fragment near the end of the payload, an attacker can make the decoder read up to roughly frag_size bytes past the end of RxPayload, copying adjacent static memory into the decoder buffers and the FUOTA flash image. The handler runs only on downlinks that have already passed the LoRaWAN frame MIC and FRMPayload decryption, so the defect is reachable only by a party holding the device's session keys (the FUOTA server or an attacker who has compromised those keys). The out-of-bounds bytes are never returned to the sender — the only uplink emitted is a status answer carrying fragment counts — so there is no direct disclosure channel, and on typical flat-memory LoRaWAN MCUs the over-read stays within mapped memory, making a crash unlikely. The impact is therefore a bounded out-of-bounds read with limited confidentiality consequence and no write or control-flow primitive. The fix adds remaining-length guards before each access.•CVE-2026-13480
  2. The LoRaWAN application-layer clock-synchronization service parses downlinks in clock_sync_package_callback() (subsys/lorawan/services/clock_sync.c). Its command loop only guarantees that the one-byte command id is in bounds; for the CLOCK_SYNC_CMD_APP_TIME (AppTimeAns) command the handler then reads a 4-byte time correction via sys_get_le32() plus a 1-byte token without checking that 5 bytes remain in the receive buffer (len - rx_pos). A short or crafted AppTimeAns therefore reads up to 5 bytes past the end of the decrypted payload. The payload (rx_buf/len) is the decrypted application frame delivered to the registered downlink callback (mcps_indication->Buffer/BufferSize). Reaching the handler requires a frame on the clock-sync port that passes LoRaWAN's MAC integrity check and FRMPayload decryption, so the practical attacker is a malicious or compromised network/application server (the designated sender of AppTimeAns) or a party holding the session keys, rather than an arbitrary radio listener. The over-read is bounded: the backing store is a fixed 255-byte static buffer, so the few stray bytes do not fault, and the read values (time_correction, token) are used only internally and never transmitted, so there is no disclosure to the attacker and no crash. The sole effect is that a stale token matching ctx.req_token can apply a garbage time_correction to the device's own clock offset (ctx.time_offset), a minor integrity impact confined to the victim's time estimate. The fix adds an explicit length check that drops a too-short AppTimeAns. Note the sibling one-byte reads in the periodicity and force-resync handlers remain unguarded with the same negligible impact.•CVE-2026-13479
  3. The Bluetooth host ATT layer (subsys/bluetooth/host/att.c) associates each in-flight ATT TX buffer with its owning channel via the static tx_meta_data_storage[] array (data->att_chan = chan). When a buffer's last reference is dropped, its net-buf destroy callback defers the completion handling to the system workqueue (att_tx_destroy -> att_tx_destroy_work_handler -> att_on_sent_cb -> bt_att_sent), where bt_att_sent dereferences the channel and its ATT context (sys_slist_get(&att->reqs)). When a peer disconnects while an ATT PDU (a server notification/indication or any response) is still in flight in the controller TX path, L2CAP tears the channel down in l2cap_chan_del(): it runs the disconnected callback and then the released callback (bt_att_released), which frees the channel slab slot. Because the in-flight buffer is held by the connection TX path rather than the channel's own queue, its deferred destroy work can run after the channel has been freed. The att_on_sent_cb guard intended to drop the stale callback itself dereferences meta->att_chan, which is now a dangling pointer into a freed (and possibly reused) slab slot. A remote peer with an ATT connection can drive this by disconnecting during routine ATT traffic; no pairing or user interaction is required to reach the ATT bearer. The result is a use-after-free read/write of freed channel memory, reliably crashing the Bluetooth host (denial of service) and, because the channel slab slot may be reused, potentially corrupting live memory. The fix makes bt_att_released() NULL the att_chan field of every tx_meta_data_storage[] entry still referencing the channel before freeing it, so the deferred guard observes a NULL pointer and drops the callback. Teardown and the destroy work both run on the cooperative system workqueue, so the array update is serialized and needs no lock.•CVE-2026-11368
  4. The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787). The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write. The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation.•CVE-2026-10849
  5. The OCPP 1.6 client in subsys/net/lib/ocpp parsed inbound WAMP RPC frames in parse_rpc_msg() (subsys/net/lib/ocpp/ocpp_j.c) using a hand-rolled helper, extract_string_field(), that copied the message's uid and action fields with strncpy(out_buf, token + 1, outlen - 1) and then scanned the result with strchr(out_buf, '"'). Because strncpy does not NUL-terminate the destination when the source is at least outlen - 1 (127) bytes long, the subsequent strchr reads past the 128-byte destination buffer into adjacent stack memory; if a " byte is found beyond the buffer, a one-byte out-of-bounds NUL write also occurs. A related defect in extract_payload() runs strchr/strrchr over the receive buffer, which may not be NUL-terminated when a maximal-length frame fills it. The parsed bytes come directly from the OCPP central-system server over a websocket: the reader thread fills recv_buf via websocket_recv_msg() and calls parse_rpc_msg() on each inbound DATA frame (subsys/net/lib/ocpp/ocpp.c). A malicious or compromised central server, or an on-path attacker (OCPP is commonly deployed over plain ws://), can send an RPC frame whose uid or action field is 127+ bytes with no closing quote, triggering the out-of-bounds access. The primary impact is a remotely triggerable denial of service: the unbounded scan can fault on an unmapped page, and the stray NUL write can corrupt adjacent stack state. The over-read data is not reflected to the peer, so disclosure is limited. The feature is EXPERIMENTAL and must be explicitly enabled (CONFIG_OCPP). The fix replaces the manual parser with the bounds-respecting json_mixed_arr_parse() and copies the extracted uid with an explicitly NUL-terminated buffer, eliminating both over-reads.•CVE-2026-10848

References

Sources include official advisories and independent security research.