CVE-2026-43467

Published May 8, 2026

Last updated 5 months ago

CVSS medium 5.5

Overview

Description
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix crash when moving to switchdev mode When moving to switchdev mode when the device doesn't support IPsec, we try to clean up the IPsec resources anyway which causes the crash below, fix that by correctly checking for IPsec support before trying to clean up its resources. [27642.515799] WARNING: arch/x86/mm/fault.c:1276 at do_user_addr_fault+0x18a/0x680, CPU#4: devlink/6490 [27642.517159] Modules linked in: xt_conntrack xt_MASQUERADE ip6table_nat ip6table_filter ip6_tables iptable_nat nf_nat xt_addrtype rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl nfnetlink zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core ib_core [27642.521358] CPU: 4 UID: 0 PID: 6490 Comm: devlink Not tainted 6.19.0-rc5_for_upstream_min_debug_2026_01_14_16_47 #1 NONE [27642.522923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [27642.524528] RIP: 0010:do_user_addr_fault+0x18a/0x680 [27642.525362] Code: ff 0f 84 75 03 00 00 48 89 ee 4c 89 e7 e8 5e b9 22 00 49 89 c0 48 85 c0 0f 84 a8 02 00 00 f7 c3 60 80 00 00 74 22 31 c9 eb ae <0f> 0b 48 83 c4 10 48 89 ea 48 89 de 4c 89 f7 5b 5d 41 5c 41 5d 41 [27642.528166] RSP: 0018:ffff88810770f6b8 EFLAGS: 00010046 [27642.529038] RAX: 0000000000000000 RBX: 0000000000000002 RCX: ffff88810b980f00 [27642.530158] RDX: 00000000000000a0 RSI: 0000000000000002 RDI: ffff88810770f728 [27642.531270] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000000 [27642.532383] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888103f3c4c0 [27642.533499] R13: 0000000000000000 R14: ffff88810770f728 R15: 0000000000000000 [27642.534614] FS: 00007f197c741740(0000) GS:ffff88856a94c000(0000) knlGS:0000000000000000 [27642.535915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27642.536858] CR2: 00000000000000a0 CR3: 000000011334c003 CR4: 0000000000172eb0 [27642.537982] Call Trace: [27642.538466] <TASK> [27642.538907] exc_page_fault+0x76/0x140 [27642.539583] asm_exc_page_fault+0x22/0x30 [27642.540282] RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30 [27642.541134] Code: 07 85 c0 75 11 ba ff 00 00 00 f0 0f b1 17 75 06 b8 01 00 00 00 c3 31 c0 c3 90 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 7e 02 00 00 48 89 d8 5b [27642.543936] RSP: 0018:ffff88810770f7d8 EFLAGS: 00010046 [27642.544803] RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffff888113ad96d8 [27642.545916] RDX: 0000000000000001 RSI: ffff88810770f818 RDI: 00000000000000a0 [27642.547027] RBP: 0000000000000098 R08: 0000000000000400 R09: ffff88810b980f00 [27642.548140] R10: 0000000000000001 R11: ffff888101845a80 R12: 00000000000000a8 [27642.549263] R13: ffffffffa02a9060 R14: 00000000000000a0 R15: ffff8881130d8a40 [27642.550379] complete_all+0x20/0x90 [27642.551010] mlx5e_ipsec_disable_events+0xb6/0xf0 [mlx5_core] [27642.552022] mlx5e_nic_disable+0x12d/0x220 [mlx5_core] [27642.552929] mlx5e_detach_netdev+0x66/0xf0 [mlx5_core] [27642.553822] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core] [27642.554821] mlx5e_vport_rep_load+0x419/0x590 [mlx5_core] [27642.555757] ? xa_load+0x53/0x90 [27642.556361] __esw_offloads_load_rep+0x54/0x70 [mlx5_core] [27642.557328] mlx5_esw_offloads_rep_load+0x45/0xd0 [mlx5_core] [27642.558320] esw_offloads_enable+0xb4b/0xc90 [mlx5_core] [27642.559247] mlx5_eswitch_enable_locked+0x34e/0x4f0 [mlx5_core] [27642.560257] ? mlx5_rescan_drivers_locked+0x222/0x2d0 [mlx5_core] [27642.561284] mlx5_devlink_eswitch_mode_set+0x5ac/0x9c0 [mlx5_core] [27642.562334] ? devlink_rate_set_ops_supported+0x21/0x3a0 [27642.563220] devlink_nl_eswitch_set_doit+0x67/0xe0 [27642.564026] genl_family_rcv_msg_doit+0xe0/0x130 [27642.564816] genl_rcv_msg+0x183/0x290 [27642.565466] ? __devlink_nl_pre_doit.isra.0+0x160/0x160 [27642.566329] ? d ---truncated---
Source
416baaa9-dc9f-4396-8d5f-8c081fb06d67
NVD status
Analyzed
Products
linux_kernel

Risk scores

CVSS 3.1

Type
Primary
Base score
5.5
Impact score
3.6
Exploitability score
1.8
Vector string
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Severity
MEDIUM

Weaknesses

nvd@nist.gov
NVD-CWE-noinfo

Social media

Hype score
Not currently trending

Configurations

Related CVEs

  1. In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). [invert direction of the conditional. - Paolo]•CVE-2026-98164
  2. In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L)•CVE-2026-98163
  3. In the Linux kernel, the following vulnerability has been resolved: smb/server: fix tree connection leak in smb2_tree_connect() See the procedure below: smb2_tree_connect ksmbd_tree_conn_connect xa_store(&sess->tree_conns, tree_conn->id, tree_conn) ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS) ksmbd_share_tree_conn_inc(sc) ksmbd_iov_pin_rsp // fail status.ret = KSMBD_TREE_CONN_STATUS_NOMEM // do not disconnect tree_conn Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails.•CVE-2026-98162
  4. In the Linux kernel, the following vulnerability has been resolved: nvdimm: pmem: keep PREFLUSH before data writes pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the bio data and can later overwrite the error with a successful REQ_FUA flush. That lets data writes run after a failed preflush and can complete the bio successfully despite the failed ordering barrier. Run the REQ_PREFLUSH flush synchronously before touching the bio data and complete the bio with the flush error if it fails. Keep asynchronous flush chaining for REQ_FUA. At that point, data copy has completed and the parent bio can wait for the chained flush bio.•CVE-2026-98161
  5. In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init() padapter->HalData is allocated via vzalloc(), but incorrectly freed using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to release this vmalloc-backed buffer can lead to memory corruption. Use rtw_hal_data_deinit() to pair the free correctly and free HalData with vfree(). The bug was first flagged by an experimental static analysis tool we are developing for kernel memory-management bugs. Manual inspection confirms that the issue is still present in current mainline. An x86_64 allyesconfig build showed no new warnings. As we do not have suitable RTL8723BS SDIO hardware to test with, no runtime testing was able to be performed.•CVE-2026-98160

References

Sources include official advisories and independent security research.