CVE-2026-45844

Published May 27, 2026

Last updated 10 days ago

CVSS medium 5.5

Overview

Description
In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target IP address. This causes arptables rules to match against garbage data, leading to incorrect filtering decisions: packets that should be accepted may be dropped and vice versa. The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already handles this correctly by skipping the target hardware address for ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()." Mangle the original patch to always return 0 (no match) in case user matches on the target hardware address which is never present in IEEE1394. Note that this returns 0 (no match) for either normal and inverse match because matching in the target hardware address in ARPHRD_IEEE1394 has never been supported by arptables. This is intentional, matching on the target hardware address should never evaluate true for ARPHRD_IEEE1394. Moreover, adjust arpt_mangle to drop the packet too as AI suggests: In arpt_mangle, the logic assumes a standard ARP layout. Because IEEE1394 (FireWire) omits the target hardware address, the linear pointer arithmetic miscalculates the offset for the target IP address. This causes mangling operations to write to the wrong location, leading to packet corruption. To ensure safety, this patch drops packets (NF_DROP) when mangling is requested for these fields on IEEE1394 devices, as the current implementation cannot correctly map the FireWire ARP payload. This omits both mangling target hardware and IP address. Even if IP address mangling should be possible in IEEE1394, this would require to adjust arpt_mangle offset calculation, which has never been supported. Based on patch from Weiming Shi <bestswngs@gmail.com>.
Source
416baaa9-dc9f-4396-8d5f-8c081fb06d67
NVD status
Modified
Products
linux_kernel

Risk scores

CVSS 3.1

Type
Primary
Base score
5.5
Impact score
3.6
Exploitability score
1.8
Vector string
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Severity
MEDIUM

Weaknesses

nvd@nist.gov
NVD-CWE-noinfo

Social media

Hype score
Not currently trending

Configurations

Related CVEs

  1. In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). [invert direction of the conditional. - Paolo]•CVE-2026-98164
  2. In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L)•CVE-2026-98163
  3. In the Linux kernel, the following vulnerability has been resolved: smb/server: fix tree connection leak in smb2_tree_connect() See the procedure below: smb2_tree_connect ksmbd_tree_conn_connect xa_store(&sess->tree_conns, tree_conn->id, tree_conn) ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS) ksmbd_share_tree_conn_inc(sc) ksmbd_iov_pin_rsp // fail status.ret = KSMBD_TREE_CONN_STATUS_NOMEM // do not disconnect tree_conn Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails.•CVE-2026-98162
  4. In the Linux kernel, the following vulnerability has been resolved: nvdimm: pmem: keep PREFLUSH before data writes pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the bio data and can later overwrite the error with a successful REQ_FUA flush. That lets data writes run after a failed preflush and can complete the bio successfully despite the failed ordering barrier. Run the REQ_PREFLUSH flush synchronously before touching the bio data and complete the bio with the flush error if it fails. Keep asynchronous flush chaining for REQ_FUA. At that point, data copy has completed and the parent bio can wait for the chained flush bio.•CVE-2026-98161
  5. In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init() padapter->HalData is allocated via vzalloc(), but incorrectly freed using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to release this vmalloc-backed buffer can lead to memory corruption. Use rtw_hal_data_deinit() to pair the free correctly and free HalData with vfree(). The bug was first flagged by an experimental static analysis tool we are developing for kernel memory-management bugs. Manual inspection confirms that the issue is still present in current mainline. An x86_64 allyesconfig build showed no new warnings. As we do not have suitable RTL8723BS SDIO hardware to test with, no runtime testing was able to be performed.•CVE-2026-98160

References

Sources include official advisories and independent security research.