CVE-2026-46052

Published May 27, 2026

Last updated 5 days ago

CVSS high 7.5

Overview

Description
In the Linux kernel, the following vulnerability has been resolved: ceph: only d_add() negative dentries when they are unhashed Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: <TASK> lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives.
Source
416baaa9-dc9f-4396-8d5f-8c081fb06d67
NVD status
Modified
Products
linux_kernel

Risk scores

CVSS 3.1

Type
Secondary
Base score
7.5
Impact score
3.6
Exploitability score
3.9
Vector string
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Severity
HIGH

Weaknesses

nvd@nist.gov
NVD-CWE-noinfo
134c704f-9b21-4f2e-91b3-4a467353bcc0
CWE-835

Social media

Hype score
Not currently trending

Configurations

Related CVEs

  1. In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). [invert direction of the conditional. - Paolo]•CVE-2026-98164
  2. In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L)•CVE-2026-98163
  3. In the Linux kernel, the following vulnerability has been resolved: smb/server: fix tree connection leak in smb2_tree_connect() See the procedure below: smb2_tree_connect ksmbd_tree_conn_connect xa_store(&sess->tree_conns, tree_conn->id, tree_conn) ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS) ksmbd_share_tree_conn_inc(sc) ksmbd_iov_pin_rsp // fail status.ret = KSMBD_TREE_CONN_STATUS_NOMEM // do not disconnect tree_conn Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails.•CVE-2026-98162
  4. In the Linux kernel, the following vulnerability has been resolved: nvdimm: pmem: keep PREFLUSH before data writes pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the bio data and can later overwrite the error with a successful REQ_FUA flush. That lets data writes run after a failed preflush and can complete the bio successfully despite the failed ordering barrier. Run the REQ_PREFLUSH flush synchronously before touching the bio data and complete the bio with the flush error if it fails. Keep asynchronous flush chaining for REQ_FUA. At that point, data copy has completed and the parent bio can wait for the chained flush bio.•CVE-2026-98161
  5. In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init() padapter->HalData is allocated via vzalloc(), but incorrectly freed using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to release this vmalloc-backed buffer can lead to memory corruption. Use rtw_hal_data_deinit() to pair the free correctly and free HalData with vfree(). The bug was first flagged by an experimental static analysis tool we are developing for kernel memory-management bugs. Manual inspection confirms that the issue is still present in current mainline. An x86_64 allyesconfig build showed no new warnings. As we do not have suitable RTL8723BS SDIO hardware to test with, no runtime testing was able to be performed.•CVE-2026-98160

References

Sources include official advisories and independent security research.