CVE-2024-56609

Published Dec 27, 2024

Last updated 7 months ago

CVSS high 7.8

Overview

Description
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use ieee80211_purge_tx_queue() to purge TX skb When removing kernel modules by: rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core Driver uses skb_queue_purge() to purge TX skb, but not report tx status causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue() to correct this. Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing between TX work and purge TX queue, flush and destroy TX work in advance. wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local choice (Reason: 3=DEAUTH_LEAVING) ------------[ cut here ]------------ Have pending ack frames! WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691 ieee80211_free_ack_frame+0x5c/0x90 [mac80211] CPU: 3 PID: 9232 Comm: rmmod Tainted: G C 6.10.1-200.fc40.aarch64 #1 Hardware name: pine64 Pine64 PinePhone Braveheart (1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211] lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211] sp : ffff80008c1b37b0 x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000 x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0 x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000 x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000 x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964 x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0 x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000 Call trace: ieee80211_free_ack_frame+0x5c/0x90 [mac80211] idr_for_each+0x74/0x110 ieee80211_free_hw+0x44/0xe8 [mac80211] rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio] sdio_bus_remove+0x44/0x180 device_remove+0x54/0x90 device_release_driver_internal+0x1d4/0x238 driver_detach+0x54/0xc0 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x78 sdio_unregister_driver+0x2c/0x40 rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs] __do_sys_delete_module.isra.0+0x190/0x338 __arm64_sys_delete_module+0x1c/0x30 invoke_syscall+0x74/0x100 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x158 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 ---[ end trace 0000000000000000 ]---
Source
416baaa9-dc9f-4396-8d5f-8c081fb06d67
NVD status
Modified
Products
linux_kernel

Risk scores

CVSS 3.1

Type
Primary
Base score
7.8
Impact score
5.9
Exploitability score
1.8
Vector string
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Severity
HIGH

Weaknesses

nvd@nist.gov
NVD-CWE-noinfo

Social media

Hype score
Not currently trending

  1. CVE-2024-56609 In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use ieee80211_purge_tx_queue() to purge TX skb When removing kernel modules by: … https://t.co/ifyT61Cltf

    @CVEnew

    27 Dec 2024

    272 Impressions

    0 Retweets

    0 Likes

    0 Bookmarks

    0 Replies

    0 Quotes

Configurations

Related CVEs

  1. In the Linux kernel, the following vulnerability has been resolved: ibmveth: Disable GSO for packets with small MSS Some physical adapters on Power systems do not support segmentation offload when the MSS is less than 224 bytes. Attempting to send such packets causes the adapter to freeze, stopping all traffic until manually reset. Implement ndo_features_check to disable GSO for packets with small MSS values. The network stack will perform software segmentation instead. The 224-byte minimum matches ibmvnic commit <f10b09ef687f> ("ibmvnic: Enforce stronger sanity checks on GSO packets") which uses the same physical adapters in SEA configurations. The issue occurs specifically when the hardware attempts to perform segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets (gso_segs == 1) do not trigger the problematic LSO code path and are transmitted normally without segmentation. Add an ndo_features_check callback to disable GSO when MSS < 224 bytes. Also call vlan_features_check() to ensure proper handling of VLAN packets, particularly QinQ (802.1ad) configurations where the hardware parser may not support certain offload features. Validated using iptables to force small MSS values. Without the fix, the adapter freezes. With the fix, packets are segmented in software and transmission succeeds. Comprehensive regression testing completedd (MSS tests, performance, stability).•CVE-2026-46273
  2. In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etr: Fix race condition between sysfs and perf mode When trying to run perf and sysfs mode simultaneously, the WARN_ON() in tmc_etr_enable_hw() is triggered sometimes: WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] [..snip..] Call trace: tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] coresight_enable_path+0x1c8/0x218 [coresight] coresight_enable_sysfs+0xa4/0x228 [coresight] enable_source_store+0x58/0xa8 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2c8/0x388 ksys_write+0x74/0x108 __arm64_sys_write+0x24/0x38 el0_svc_common.constprop.0+0x64/0x148 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Since the enablement of sysfs mode is separeted into two critical regions, one for sysfs buffer allocation and another for hardware enablement, it's possible to race with the perf mode. Fix this by double check whether the perf mode's been used before enabling the hardware in sysfs mode. mode: [sysfs mode] [perf mode] tmc_etr_get_sysfs_buffer() spin_lock(&drvdata->spinlock) [sysfs buffer allocation] spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() drvdata->etr_buf = etr_perf->etr_buf spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at the perf side spin_unlock(&drvdata->spinlock) With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf. This ensures we verify whether the perf mode's already running before we actually allocate the buffer. Then we can save the time of allocating/freeing the sysfs buffer if race with the perf mode.•CVE-2026-46272
  3. In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: do WoW offloads only on primary link In case of multi-link connection, WCN7850 firmware crashes due to WoW offloads enabled on both primary and secondary links. Change to do it only on primary link to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1•CVE-2026-46271
  4. In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.•CVE-2026-46270
  5. In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree When probing the k230 pinctrl driver, the kernel triggers a NULL pointer dereference. The crash trace showed: [ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068 [ 0.740737] ... [ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc In k230_pinctrl_parse_functions(), we attempt to retrieve the device pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized after k230_pinctrl_parse_dt() completes. At the time of DT parsing, info->pctl_dev is still NULL, leading to the invalid dereference of info->pctl_dev->dev. Use the already available device pointer from platform_device instead of accessing through uninitialized pctl_dev.•CVE-2026-46269

References

Sources include official advisories and independent security research.