CVE-2026-4179

Published Mar 16, 2026

Last updated 3 months ago

CVSS medium 6.1

Overview

Description
Issues in stm32 USB device driver (drivers/usb/device/usb_dc_stm32.c) can lead to an infinite while loop.
Source
vulnerabilities@zephyrproject.org
NVD status
Analyzed
Products
zephyr

Risk scores

CVSS 3.1

Type
Secondary
Base score
6.1
Impact score
4.2
Exploitability score
1.8
Vector string
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H
Severity
MEDIUM

Weaknesses

vulnerabilities@zephyrproject.org
CWE-835

Social media

Hype score
Not currently trending

Configurations

Related CVEs

  1. The Dhara flash translation layer disk driver (drivers/disk/ftl_dhara.c) implemented the dhara_nand_ callbacks so that, on a flash error, the error code was written unconditionally through the caller-supplied dhara_error_t err pointer (e.g. *err = DHARA_E_ECC in dhara_nand_read, and similar in dhara_nand_erase/prog/copy). The upstream Dhara library calls these callbacks with err == NULL along its journal-resume binary search: find_last_checkblock() invokes find_checkblock(j, mid, &found, NULL), which forwards the NULL pointer into dhara_nand_read(). This path runs during disk_ftl_access_init() -> dhara_map_resume() whenever the FTL disk is mounted/initialised. If a flash read error (uncorrectable ECC, bad block, controller error) occurs on one of the probed checkpoint pages, the driver dereferences and writes to NULL, faulting the kernel (denial of service). The trigger is conditioned on the NAND medium content/health, which can be influenced by media wear, induced faults, or a corrupted/crafted on-flash image. The fix routes all error assignments through the library's NULL-safe dhara_set_error() helper. Affects Zephyr v4.4.0, where the driver was introduced.•CVE-2026-10659
  2. Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator. The hostname (query) is the caller-supplied name passed through the standard getaddrinfo()/dns_get_addr_info()/dns_resolve_name() path and is influenceable by operators or remote inputs (server names from configuration, parsed URLs, or app-facing interfaces). On a tightly-sized buffer with no slack (for example a userspace getaddrinfo call where the hostname is copied with k_usermode_string_alloc_copy to exactly strlen+1 bytes), the over-read crosses the allocation boundary; if that boundary is unmapped (guard page, memory-domain boundary under MPU, or an address sanitizer) the over-read faults, causing a denial of service. The over-read bytes are never returned, so there is no information disclosure. The flaw is compiled only when CONFIG_MDNS_RESOLVER is enabled, exists since v1.10.0, and is fixed by replacing the fixed-length memcmp with a NUL-safe strcmp(ptr, ".local").•CVE-2026-10657
  3. The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver thread; between queuing and processing, the endpoint FIFO can be drained by host-controlled control flow — in particular udc_setup_received() drains the EP0 OUT/IN FIFOs whenever a new SETUP packet arrives, and dequeue/disable/purge paths drain it likewise. A USB host that aborts an in-flight EP0 control transfer with a new SETUP packet (legal USB behavior) can therefore cause a stale XFER_OUT_DONE event to be processed against an empty FIFO, producing net_buf_add(NULL, ...), a near-NULL pointer dereference that faults and crashes the device. No authentication is required; the attacker is the USB host the device is connected to (physical bus access). Impact is denial of service (device crash). The defect was introduced when the MAX32 UDC driver was added and shipped in Zephyr v4.4.0. The fix adds NULL-buffer checks that return early with UDC_EVT_ERROR/-ENOBUFS in both the OUT-done and IN-done handlers.•CVE-2026-10656
  4. The Zephyr Bluetooth controller ISO Adaptation Layer (subsys/bluetooth/controller/ll_sw/isoal.c) fails to validate the length field of a framed ISO PDU start segment. Per the Bluetooth specification a start segment (sc=0) always carries a 3-byte time_offset, so its segment-header len must be at least PDU_ISO_SEG_TIMEOFFSET_SIZE (3). isoal_check_seg_header() accepted start segments with len < 3 as valid, and isoal_rx_framed_consume() then computed length = seg_hdr->len - 3 in a uint8_t, underflowing to 253-255 when len is 0-2. That oversized length is passed to isoal_rx_append_to_sdu(), whose copy is clamped only against the destination SDU buffer size, not the source PDU length, so up to ~255 bytes of controller memory beyond the received PDU are copied (via sink_sdu_write_hci()/net_buf_add_mem) into an HCI ISO data packet and delivered to the host. The PDU and its segment headers are entirely attacker-controlled and arrive over the air, reachable through both the CIS and BIS-sync HCI data paths (hci_driver.c) and the vendor data path (ull_iso.c), so a remote CIS peer or a broadcaster the device is synced to can trigger an out-of-bounds read causing information disclosure to the host and potential denial of service (faults or malformed oversized HCI ISO packets). The flaw affects all Zephyr releases since framed ISO reception was introduced in v3.0.0. The fix rejects sc=0 segments with len < 3 in isoal_check_seg_header() and adds a guard before the subtraction in isoal_rx_framed_consume().•CVE-2026-9263
  5. The asynchronous SNTP client in Zephyr (subsys/net/lib/sntp/sntp.c, sntp_close_async) closed the UDP socket file descriptor directly from the calling thread immediately after detaching it from the network socket service, without synchronizing with the socket-service poll thread. The socket service thread polls each socket via zvfs_poll, which (in zsock_poll_prepare_ctx) registers a k_poll_event pointing into the socket's net_context (&ctx->recv_q) and then blocks in k_poll without holding a reference or lock. net_context objects are allocated from a fixed pool (contexts[CONFIG_NET_MAX_CONTEXTS]) and reused after close. When sntp_close_async is invoked from a different thread than the poll thread (in the in-tree consumer subsys/net/lib/config/init_clock_sntp.c, the SNTP timeout handler runs on the system workqueue while the socket service thread is blocked in poll on the same fd), the close frees and may reuse the net_context while the poll thread still has a poller node linked into the freed object, resulting in a use-after-free / object confusion of kernel poll structures. The SNTP timeout path is the normal no-response failure mode, so a network peer or off-path attacker who drops or delays the SNTP/NTP response can drive the racing close repeatedly (and periodically with NET_CONFIG_SNTP_INIT_RESYNC). The most likely consequence is a crash of the networking thread (denial of service), with potential memory corruption when the freed context slot is reallocated. The fix defers the close to the socket service thread itself via net_socket_service_close (NET_SOCKET_SERVICE_CLOSE_SOCKETS), so the same thread that polls performs the close, eliminating the race. Affected releases: v4.2.0 through v4.4.0.•CVE-2026-10655

References

Sources include official advisories and independent security research.