Netgear vulnerabilities

A cross site request forgery (CSRF) vulnerability in the listed NETGEAR models allows an attacker who can leverage social engineering techniques on a router administrator to tamper with router configuration and disrupt router operations with active assistance from the router administrator. There is no confidentiality impact due to this vulnerability.

Insufficient input validation vulnerability in the NETGEAR R7000 models allows authenticated administrators connected to the local network to make unauthorized modification to router software and functionality.

A command injection vulnerability in the listed NETGEAR models allows a network-adjacent attacker with the ability to intercept and modify local network traffic (attacker-in-the-middle) to compromise the confidentiality and integrity of the affected device. This issue is limited to certain region-specific SKUs.

A command injection vulnerability in certain affected NETGEAR Nighthawk devices allows a network-adjacent attacker with the ability to intercept and modify local network traffic (attacker in the middle) to compromise the confidentiality and integrity of the affected device.

Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification to router software and functionality.

Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification to the device software and functionality.

A stack-based buffer overflow vulnerability affects the listed NETGEAR models allowing an authenticated admin user to make unauthorized modification to the router's software and functionality.

A buffer overflow vulnerability in the listed NETGEAR models allows an authenticated admin user to cause the affected device to become temporarily unavailable.

A buffer overflow vulnerability in the listed NETGEAR models allows a device administrator to temporarily interrupt the normal operation of the affected device.

A Server-side request forgery (SSRF) vulnerability has been identified in the SMA1000 Appliance Work Place interface. A remote unauthenticated attacker could potentially cause the appliance to make requests to unintended location.

A security flaw was discovered in certain NETGEAR Nighthawk RAX series routers that could allow someone already logged in to the device to run unauthorized commands or code on the router.

A security flaw in the router's certificate validation process was discovered in the NETGEAR XR1000 Gaming Router and certain Nighthawk models that could allow an unauthorized person to remotely access and take control of the device.

A security flaw was found in certain NETGEAR Orbi models that could allow an unauthorized user to cause the device to stop responding or restart unexpectedly, disrupting network connectivity and making the device temporarily unavailable.

Joomla Extension - balbooa.com - Unauthenticated file upload in Balbooa Forms extension < 2.4.1 - The Joomla extension Balbooa Forms is vulnerable to an unauthenticated arbitrary file upload that allows uploading executable files and leads to full RCE.

A vulnerability in the iCagenda extension for Joomla allows the upload of arbitrary files in the file attachment feature, ultimately resulting in PHP code upload and execution.

A vulnerability in the affected NETGEAR gaming routers allows attackers with the ability to intercept and tamper with traffic between the router and the Internet, to execute code on the device.

Insufficient authentication and input validation in the listed NETGEAR models allow users connected to the local network to execute commands impacting the product's confidentiality or change certain configurations.

An unauthenticated user on the local network can gain control of the router and make unauthorized changes to its operation.

Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification of router software and functionality.

Unauthenticated users on the local network can cause the router to become unavailable by sending specially crafted requests.

Insufficient input validation in NETGEAR JR6150 (AC750 WiFi Router 802.11ac Dual Band Gigabit released in 2014) allows users connected to the local WiFi Networks to execute operating system commands. NETGEAR JR6150 has reached End-of-Support phase as of 2018 , and no further security updates are planned. NETGEAR strongly recommends replacing these devices with newer NETGEAR models to ensure continued security support and updates. This vulnerability has been identified through firmware emulation in a controlled research environment and has not been verified on production hardware.

Insufficient configuration management in the listed devices allows authenticated administrators connected to the local network to tamper with the system.

Insufficient input validation vulnerability in the listed NETGEAR devices allows authenticated administrators connected to the local network to tamper with the router's integrity.

An insufficient input validation vulnerability in certain NETGEAR router models as listed allows an authenticated administrator with local network access to submit crafted input that bypasses intended management interface restrictions, resulting in unauthorized modification of protected router software or functionality.

Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification of router software and functionality.

Insufficient input validation vulnerability in NETGEAR JR6150 (AC750 WiFi Router 802.11ac Dual Band Gigabit released in 2014) allows administrators connected to the local network to make unauthorized modification of router software and functionality. NETGEAR JR6150 reached End-of-Support status in 2018 and is no longer receiving security updates. NETGEAR strongly recommends replacing these devices with newer NETGEAR models to ensure continued security support and updates. This vulnerability has been identified through firmware emulation in a controlled research environment and has not been verified on production hardware.

An information disclosure vulnerability in the NETGEAR Orbi satellites (RBR/RBE/RBS Series) could allow a user connected to your network to gain administrator access to the Orbi router. The listed NETGEAR models are affected by this vulnerability. Orbi WiFi Systems without satellite devices are not impacted by this issue.

Authenticated administrators connected to the local network can gain elevated access to the router and make unauthorized changes to router software and functionality.

A NETGEAR security issue that could allow an attacker with ability to intercept and tamper with traffic between the router and the Internet to run commands on your device when the device administrator performs certain specific management actions. This issue affects NETGEAR Orbi 370 series devices before V12.1.2.7.

Missing hash/digest size and OID checks allow digests smaller than allowed when verifying ECDSA certificates, or smaller than is appropriate for the relevant key type, to be accepted by signature verification functions. This could lead to reduced security of ECDSA certificate-based authentication if the public CA key used is also known. This affects ECDSA/ECC verification when EdDSA or ML-DSA is also enabled.

Some end of service NETGEAR products provide "TelnetEnable" functionality, which allows a magic packet to activate telnet service on the box.

FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, does not properly validate TLS certificates when downloading update packages through its auto-update mechanism. An attacker (suitably positioned on the network) could intercept the update request and deliver a malicious update package in order to gain arbitrary code execution on affected devices. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26.

FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, exposes an HTTP server over the LAN interface of affected devices. This interface is vulnerable to unauthenticated arbitrary command injection through the funjsq_access_token parameter. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26.

A path traversal vulnerability in NETGEAR WiFi range extenders allows an attacker with LAN authentication to access the router's IP and review the contents of the dynamically generated webproc file, which records the username and password submitted to the router GUI.

An insufficient authentication vulnerability in NETGEAR WiFi range extenders allows a network adjacent attacker with WiFi authentication or a physical Ethernet port connection to bypass the authentication process and access the admin panel.

An insufficient input validation vulnerability in the NETGEAR XR1000v2 allows attackers connected to the router's LAN to execute OS command injections.

An authentication bypass vulnerability in NETGEAR Orbi devices allows users connected to the local network to access the router web interface as an admin.

An insufficient input validation vulnerability in NETGEAR Orbi devices' DHCPv6 functionality allows network adjacent attackers authenticated over WiFi or on LAN to execute OS command injections on the router. DHCPv6 is not enabled by default.

An insufficient input validation vulnerability in NETGEAR Orbi routers allows attackers connected to the router's LAN to execute OS command injections.

Netgear EX8000 V1.0.0.126 was discovered to contain a command injection vulnerability via the switch_status function.

Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the iface parameter in the action_bandwidth function.

A vulnerability in the speedtest feature of affected NETGEAR Nighthawk routers, caused by improper input validation, can allow attackers on the router's WAN side, using attacker-in-the-middle techniques (MiTM) to manipulate DNS responses and execute commands when speedtests are run. This issue affects RS700: through 1.0.7.82; RAX54Sv2 : before V1.1.6.36; RAX41v2: before V1.1.6.36; RAX50: before V1.2.14.114; RAXE500: before V1.2.14.114; RAX41: before V1.0.17.142; RAX43: before V1.0.17.142; RAX35v2: before V1.0.17.142; RAXE450: before V1.2.14.114; RAX43v2: before V1.1.6.36; RAX42: before V1.0.17.142; RAX45: before V1.0.17.142; RAX50v2: before V1.1.6.36; MR90: before V1.0.2.46; MS90: before V1.0.2.46; RAX42v2: before V1.1.6.36; RAX49S: before V1.1.6.36.

An improper input validation vulnerability in the NETGEAR Nighthawk R7000P (end of service) routers lets an authenticated administrator with local network access to the device, to execute OS command injections and make unauthorized modifications to the router software and functionality impacting its integrity. There is no additional impact to confidentiality or availability. This issue affects R7000P: through 1.3.3.154.

Denial of Service Vulnerability in NETGEAR C6220 and C6230 (DOCSIS® 3.0 Two-in-one Cable Modem + WiFi Router) allows authenticated local WiFi users reboot the router.

Improper certificate validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band WiFi 6E Router) allows attackers with the ability to intercept and tamper traffic destined to the device to execute arbitrary commands on the device. Devices with automatic updates enabled may already have this patch applied. If not, please check the firmware version and update to the latest. Fixed in: RAX30 firmware 1.0.14.108 or later. RAXE300 firmware 1.0.9.82 or later

Improper Input Validation vulnerability in NETGEAR R6260 and NETGEAR R6850 allows unauthenticated attackers connected to LAN with ability to perform MiTM attacks and control over DNS Server to perform command execution.This issue affects R6260: through 1.1.0.86; R6850: through 1.1.0.86.

In Netgear R7000 V1.3.1.64_10.1.36 and EAX80 V1.0.1.70_1.0.2, the USERLIMIT_GLOBAL option is set to 0 in the bftpd.conf configuration file. This can cause DoS attacks when unlimited users are connected.

In Netgear RAX30 V1.0.10.94, a PHP-FPM misconfiguration vulnerability is caused by not following the specification to only limit FPM to .php extensions. An attacker may exploit this by uploading malicious scripts disguised with alternate extensions and tricking the web server into executing them as PHP, bypassing security mechanisms based on file extension filtering. This may lead to remote code execution (RCE), information disclosure, or full system compromise.

A remote code execution vulnerability exists in multiple Netcore and Netis routers models with firmware released prior to August 2014 due to the presence of an undocumented backdoor listener on UDP port 53413. Exact version boundaries remain undocumented. An unauthenticated remote attacker can send specially crafted UDP packets to execute arbitrary commands on the affected device. This backdoor uses a hardcoded authentication mechanism and accepts shell commands post-authentication. Some device models include a non-standard implementation of the `echo` command, which may affect exploitability.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.