System vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: net: macsec: Fix offload support for NETDEV_UNREGISTER event Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event.

In the Linux kernel, the following vulnerability has been resolved: scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section.

In the Linux kernel, the following vulnerability has been resolved: bpf: Use VM_MAP instead of VM_ALLOC for ringbuf After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix crash with stop filters in single-range mode Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix error handling in ext4_fc_record_modified_inode() Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that. Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file.

In the Linux kernel, the following vulnerability has been resolved: tipc: improve size validations for received domain records The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435

In the Linux kernel, the following vulnerability has been resolved: ARM: 9170/1: fix panic when kasan and kprobe are enabled arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Remove HCI_AMP support Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether.

In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Check whether the media is initialized The member "uzonesize" of struct alauda_info will remain 0 if alauda_init_media() fails, potentially causing divide errors in alauda_read_data() and alauda_write_lba(). - Add a member "media_initialized" to struct alauda_info. - Change a condition in alauda_check_media() to ensure the first initialization. - Add an error check for the return value of alauda_init_media().

In the Linux kernel, the following vulnerability has been resolved: sit: do not call ipip6_dev_free() from sit_init_net() ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ovl: fix warning in ovl_create_real() Syzbot triggered the following warning in ovl_workdir_create() -> ovl_create_real(): if (!err && WARN_ON(!newdentry->d_inode)) { The reason is that the cgroup2 filesystem returns from mkdir without instantiating the new dentry. Weird filesystems such as this will be rejected by overlayfs at a later stage during setup, but to prevent such a warning, call ovl_mkdir_real() directly from ovl_workdir_create() and reject this case early.

In the Linux kernel, the following vulnerability has been resolved: io-wq: check for wq exit after adding new worker task_work We check IO_WQ_BIT_EXIT before attempting to create a new worker, and wq exit cancels pending work if we have any. But it's possible to have a race between the two, where creation checks exit finding it not set, but we're in the process of exiting. The exit side will cancel pending creation task_work, but there's a gap where we add task_work after we've canceled existing creations at exit time. Fix this by checking the EXIT bit post adding the creation task_work. If it's set, run the same cancelation that exit does.

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Set lower bound of start tick time Currently ALSA timer doesn't have the lower limit of the start tick time, and it allows a very small size, e.g. 1 tick with 1ns resolution for hrtimer. Such a situation may lead to an unexpected RCU stall, where the callback repeatedly queuing the expire update, as reported by fuzzer. This patch introduces a sanity check of the timer start tick time, so that the system returns an error when a too small start size is set. As of this patch, the lower limit is hard-coded to 100us, which is small enough but can still work somehow.

In the Linux kernel, the following vulnerability has been resolved: kunit/fortify: Fix mismatched kvalloc()/vfree() usage The kv*() family of tests were accidentally freeing with vfree() instead of kvfree(). Use kvfree() instead.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: re-fix fortified-memset warning The carl9170_tx_release() function sometimes triggers a fortified-memset warning in my randconfig builds: In file included from include/linux/string.h:254, from drivers/net/wireless/ath/carl9170/tx.c:40: In function 'fortify_memset_chk', inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2, inlined from 'kref_put' at include/linux/kref.h:65:3, inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9: include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); Kees previously tried to avoid this by using memset_after(), but it seems this does not fully address the problem. I noticed that the memset_after() here is done on a different part of the union (status) than the original cast was from (rate_driver_data), which may confuse the compiler. Unfortunately, the memset_after() trick does not work on driver_rates[] because that is part of an anonymous struct, and I could not get struct_group() to do this either. Using two separate memset() calls on the two members does address the warning though.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: exit() callback is optional The exit() callback is optional and shouldn't be called without checking a valid pointer first. Also, we must clear freq_table pointer even if the exit() callback isn't present.

In the Linux kernel, the following vulnerability has been resolved: openrisc: traps: Don't send signals to kernel mode threads OpenRISC exception handling sends signals to user processes on floating point exceptions and trap instructions (for debugging) among others. There is a bug where the trap handling logic may send signals to kernel threads, we should not send these signals to kernel threads, if that happens we treat it as an error. This patch adds conditions to die if the kernel receives these exceptions in kernel mode code.

In the Linux kernel, the following vulnerability has been resolved: m68k: Fix spinlock race in kernel thread creation Context switching does take care to retain the correct lock owner across the switch from 'prev' to 'next' tasks. This does rely on interrupts remaining disabled for the entire duration of the switch. This condition is guaranteed for normal process creation and context switching between already running processes, because both 'prev' and 'next' already have interrupts disabled in their saved copies of the status register. The situation is different for newly created kernel threads. The status register is set to PS_S in copy_thread(), which does leave the IPL at 0. Upon restoring the 'next' thread's status register in switch_to() aka resume(), interrupts then become enabled prematurely. resume() then returns via ret_from_kernel_thread() and schedule_tail() where run queue lock is released (see finish_task_switch() and finish_lock_switch()). A timer interrupt calling scheduler_tick() before the lock is released in finish_task_switch() will find the lock already taken, with the current task as lock owner. This causes a spinlock recursion warning as reported by Guenter Roeck. As far as I can ascertain, this race has been opened in commit 533e6903bea0 ("m68k: split ret_from_fork(), simplify kernel_thread()") but I haven't done a detailed study of kernel history so it may well predate that commit. Interrupts cannot be disabled in the saved status register copy for kernel threads (init will complain about interrupts disabled when finally starting user space). Disable interrupts temporarily when switching the tasks' register sets in resume(). Note that a simple oriw 0x700,%sr after restoring sr is not enough here - this leaves enough of a race for the 'spinlock recursion' warning to still be observed. Tested on ARAnyM and qemu (Quadra 800 emulation).

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn't called. This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: check for null before dereferencing The wcid can be NULL. It should be checked for validity before dereferencing it to avoid crash.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix netif state handling mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate slices count returned by FW The function adf_send_admin_tl_start() enables the telemetry (TL) feature on a QAT device by sending the ICP_QAT_FW_TL_START message to the firmware. This triggers the FW to start writing TL data to a DMA buffer in memory and returns an array containing the number of accelerators of each type (slices) supported by this HW. The pointer to this array is stored in the adf_tl_hw_data data structure called slice_cnt. The array slice_cnt is then used in the function tl_print_dev_data() to report in debugfs only statistics about the supported accelerators. An incorrect value of the elements in slice_cnt might lead to an out of bounds memory read. At the moment, there isn't an implementation of FW that returns a wrong value, but for robustness validate the slice count array returned by FW.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: et8ek8: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text)

In the Linux kernel, the following vulnerability has been resolved: drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map() Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing.

In the Linux kernel, the following vulnerability has been resolved: macintosh/via-macii: Fix "BUG: sleeping function called from invalid context" The via-macii ADB driver calls request_irq() after disabling hard interrupts. But disabling interrupts isn't necessary here because the VIA shift register interrupt was masked during VIA1 initialization.

In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix NULL module pointer assignment at card init The commit 81033c6b584b ("ALSA: core: Warn on empty module") introduced a WARN_ON() for a NULL module pointer passed at snd_card object creation, and it also wraps the code around it with '#ifdef MODULE'. This works in most cases, but the devils are always in details. "MODULE" is defined when the target code (i.e. the sound core) is built as a module; but this doesn't mean that the caller is also built-in or not. Namely, when only the sound core is built-in (CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m), the passed module pointer is ignored even if it's non-NULL, and card->module remains as NULL. This would result in the missing module reference up/down at the device open/close, leading to a race with the code execution after the module removal. For addressing the bug, move the assignment of card->module again out of ifdef. The WARN_ON() is still wrapped with ifdef because the module can be really NULL when all sound drivers are built-in. Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would lead to a false-positive NULL module check. Admittedly it won't catch perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no real problem as it's only for debugging, and the condition is pretty rare.

In the Linux kernel, the following vulnerability has been resolved: block: refine the EOF check in blkdev_iomap_begin blkdev_iomap_begin rounds down the offset to the logical block size before stashing it in iomap->offset and checking that it still is inside the inode size. Check the i_size check to the raw pos value so that we don't try a zero size write if iter->pos is unaligned.

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action() fails, the irq vector is not freed, which leads to a memory leak. Replace the devm_add_action with devm_add_action_or_reset to ensure the irq vector can be destroyed when it fails.

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix reference count leak issues of ax25_dev The ax25_addr_ax25dev() and ax25_dev_device_down() exist a reference count leak issue of the object "ax25_dev". Memory leak issue in ax25_addr_ax25dev(): The reference count of the object "ax25_dev" can be increased multiple times in ax25_addr_ax25dev(). This will cause a memory leak. Memory leak issues in ax25_dev_device_down(): The reference count of ax25_dev is set to 1 in ax25_dev_device_up() and then increase the reference count when ax25_dev is added to ax25_dev_list. As a result, the reference count of ax25_dev is 2. But when the device is shutting down. The ax25_dev_device_down() drops the reference count once or twice depending on if we goto unlock_put or not, which will cause memory leak. As for the issue of ax25_addr_ax25dev(), it is impossible for one pointer to be on a list twice. So add a break in ax25_addr_ax25dev(). As for the issue of ax25_dev_device_down(), increase the reference count of ax25_dev once in ax25_dev_device_up() and decrease the reference count of ax25_dev after it is removed from the ax25_dev_list.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix a race between readers and resize checks The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab792705c ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ALSA: Fix deadlocks with kctl removals at disconnection In snd_card_disconnect(), we set card->shutdown flag at the beginning, call callbacks and do sync for card->power_ref_sleep waiters at the end. The callback may delete a kctl element, and this can lead to a deadlock when the device was in the suspended state. Namely: * A process waits for the power up at snd_power_ref_and_wait() in snd_ctl_info() or read/write() inside card->controls_rwsem. * The system gets disconnected meanwhile, and the driver tries to delete a kctl via snd_ctl_remove*(); it tries to take card->controls_rwsem again, but this is already locked by the above. Since the sleeper isn't woken up, this deadlocks. An easy fix is to wake up sleepers before processing the driver disconnect callbacks but right after setting the card->shutdown flag. Then all sleepers will abort immediately, and the code flows again. So, basically this patch moves the wait_event() call at the right timing. While we're at it, just to be sure, call wait_event_all() instead of wait_event(), although we don't use exclusive events on this queue for now.

In the Linux kernel, the following vulnerability has been resolved: eth: sungem: remove .ndo_poll_controller to avoid deadlocks Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly.

In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: md: fix resync softlockup when bitmap size is less than array size Is is reported that for dm-raid10, lvextend + lvchange --syncaction will trigger following softlockup: kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976] CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1 RIP: 0010:_raw_spin_unlock_irq+0x13/0x30 Call Trace: <TASK> md_bitmap_start_sync+0x6b/0xf0 raid10_sync_request+0x25c/0x1b40 [raid10] md_do_sync+0x64b/0x1020 md_thread+0xa7/0x170 kthread+0xcf/0x100 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1a/0x30 And the detailed process is as follows: md_do_sync j = mddev->resync_min while (j < max_sectors) sectors = raid10_sync_request(mddev, j, &skipped) if (!md_bitmap_start_sync(..., &sync_blocks)) // md_bitmap_start_sync set sync_blocks to 0 return sync_blocks + sectors_skippe; // sectors = 0; j += sectors; // j never change Root cause is that commit 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") return early from md_bitmap_get_counter(), without setting returned blocks. Fix this problem by always set returned blocks from md_bitmap_get_counter"(), as it used to be. Noted that this patch just fix the softlockup problem in kernel, the case that bitmap size doesn't match array size still need to be fixed.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix peer devlink set for SF representor devlink port The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: move the EST lock to struct stmmac_priv Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c

In the Linux kernel, the following vulnerability has been resolved: net: micrel: Fix receiving the timestamp in the frame for lan8841 The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Init `ddp_comp` with devm_kcalloc() In the case where `conn_routes` is true we allocate an extra slot in the `ddp_comp` array but mtk_drm_crtc_create() never seemed to initialize it in the test case I ran. For me, this caused a later crash when we looped through the array in mtk_drm_crtc_mode_valid(). This showed up for me when I booted with `slub_debug=FZPUA` which poisons the memory initially. Without `slub_debug` I couldn't reproduce, presumably because the later code handles the value being NULL and in most cases (not guaranteed in all cases) the memory the allocator returned started out as 0. It really doesn't hurt to initialize the array with devm_kcalloc() since the array is small and the overhead of initting a handful of elements to 0 is small. In general initting memory to zero is a safer practice and usually it's suggested to only use the non-initting alloc functions if you really need to. Let's switch the function to use an allocation function that zeros the memory. For me, this avoids the crash.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level.

In the Linux kernel, the following vulnerability has been resolved: netrom: fix possible dead-lock in nr_rt_ioctl() syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1] Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node) [1] WARNING: possible circular locking dependency detected 6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Not tainted ------------------------------------------------------ syz-executor350/5129 is trying to acquire lock: ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 but task is already holding lock: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (nr_node_list_lock){+...}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_remove_node net/netrom/nr_route.c:299 [inline] nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355 nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&nr_node->node_lock){+...}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nr_node_list_lock); lock(&nr_node->node_lock); lock(nr_node_list_lock); lock(&nr_node->node_lock); *** DEADLOCK *** 1 lock held by syz-executor350/5129: #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] #0: ffffffff8f70 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() In the prueth_probe() function, if one of the calls to emac_phy_connect() fails due to of_phy_connect() returning NULL, then the subsequent call to phy_attached_info() will dereference a NULL pointer. Check the return code of emac_phy_connect and fail cleanly if there is an error.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix possible use-after-free issue in ftrace_location() KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted: CPU1 | CPU2 register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free! To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().

In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds.

In the Linux kernel, the following vulnerability has been resolved: r8169: Fix possible ring buffer corruption on fragmented Tx packets. An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied.

In the Linux kernel, the following vulnerability has been resolved: tools/nolibc/stdlib: fix memory error in realloc() Pass user_p_len to memcpy() instead of heap->len to prevent realloc() from copying an extra sizeof(heap) bytes from beyond the allocated region.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential hang in nilfs_detach_log_writer() Syzbot has reported a potential hang in nilfs_detach_log_writer() called during nilfs2 unmount. Analysis revealed that this is because nilfs_segctor_sync(), which synchronizes with the log writer thread, can be called after nilfs_segctor_destroy() terminates that thread, as shown in the call trace below: nilfs_detach_log_writer nilfs_segctor_destroy nilfs_segctor_kill_thread --> Shut down log writer thread flush_work nilfs_iput_work_func nilfs_dispose_list iput nilfs_evict_inode nilfs_transaction_commit nilfs_construct_segment (if inode needs sync) nilfs_segctor_sync --> Attempt to synchronize with log writer thread *** DEADLOCK *** Fix this issue by changing nilfs_segctor_sync() so that the log writer thread returns normally without synchronizing after it terminates, and by forcing tasks that are already waiting to complete once after the thread terminates. The skipped inode metadata flushout will then be processed together in the subsequent cleanup work in nilfs_segctor_destroy().

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c