System vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: media: amphion: Fix race between m2m job_abort and device_run Fix kernel panic caused by race condition where v4l2_m2m_ctx_release() frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run with the same context. Race sequence: v4l2_m2m_try_run(): v4l2_m2m_ctx_release(): lock/unlock v4l2_m2m_cancel_job() job_abort() v4l2_m2m_job_finish() kfree(m2m_ctx) <- frees ctx device_run() <- use-after-free crash at 0x538 Crash trace: Unable to handle kernel read from unreadable memory at virtual address 0000000000000538 v4l2_m2m_try_run+0x78/0x138 v4l2_m2m_device_run_work+0x14/0x20 The amphion vpu driver does not rely on the m2m framework's device_run callback to perform encode/decode operations. Fix the race by preventing m2m framework job scheduling entirely: - Add job_ready callback returning 0 (no jobs ready for m2m framework) - Remove job_abort callback to avoid the race condition

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork() hook_cred_transfer() only copies the Landlock security blob when the source credential has a domain. This is inconsistent with landlock_restrict_self() which can set LOG_SUBDOMAINS_OFF on a credential without creating a domain (via the ruleset_fd=-1 path): the field is committed but not preserved across fork() because the child's prepare_creds() calls hook_cred_transfer() which skips the copy when domain is NULL. This breaks the documented use case where a process mutes subdomain logs before forking sandboxed children: the children lose the muting and their domains produce unexpected audit records. Fix this by unconditionally copying the Landlock credential blob.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in SSP passkey handlers hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path.

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix string overrun due to missing termination When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm Snapdragon X1 we see a string buffer overrun: BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535) Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120 CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025 Call trace: show_stack (arch/arm64/kernel/stacktrace.c:501) (C) dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) __asan_report_load1_noabort (mm/kasan/report_generic.c:378) aa_dfa_match (security/apparmor/match.c:535) match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336) match_mnt (security/apparmor/mount.c:371) aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4)) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) Allocated by task 2120: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_alloc_info (mm/kasan/generic.c:571) __kasan_kmalloc (mm/kasan/common.c:419) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272) aa_get_buffer (security/apparmor/lsm.c:2201) aa_bind_mount (security/apparmor/mount.c:442) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) The buggy address belongs to the object at ffff0008901ca000 which belongs to the cache kmalloc-rnd-06-8k of size 8192 The buggy address is located 0 bytes to the right of allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0 flags: 0x8000000000000040(head|zone=2) page_type: f5(slab) raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: selinux: fix overlayfs mmap() and mprotect() access checks The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls.

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix MR cleanup on copy error __rds_rdma_map() hands sg/pages ownership to the transport after get_mr() succeeds. If copying the generated cookie back to user space fails after that point, the error path must not free those resources again before dropping the MR reference. Remove the duplicate unpin/free from the put_user() failure branch so that MR teardown is handled only through the existing final cleanup path.

In the Linux kernel, the following vulnerability has been resolved: ceph: only d_add() negative dentries when they are unhashed Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: <TASK> lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe().

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix deadlock with check operation and nowait requests When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Add fallback to default RSR for S/PDIF spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR for the MSR calculation loop. However, pll_rate is only updated in atc_pll_init() and not in hw_pll_init(), so it remains 0 after the card init. When spdif_passthru_playback_setup() skips atc_pll_init() for 32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin indefinitely. Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects the hardware state, since hw_card_init() already configures the PLL to the default RSR.

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix usb_dev refcount leak on probe failure create_card() takes a reference on the USB device with usb_get_dev() and stores the matching usb_put_dev() in card_free(), which is installed as the snd_card's ->private_free destructor. However, ->private_free is only assigned near the end of init_card(), after several failure points (usb_set_interface(), EP type checks, usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its timeout). When any of those fail, init_card() returns an error to snd_probe(), which calls snd_card_free(card). Because ->private_free is still NULL, card_free() never runs, the usb_get_dev() reference is not dropped, and the struct usb_device leaks along with its descriptor allocations and device_private. syzbot reproduces this with a malformed UAC3 device whose only valid altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call fails with -EIO and triggers the leak. Move the ->private_free assignment into create_card(), immediately after usb_get_dev(), so that every error path reaching snd_card_free() balances the reference. card_free()'s callees (snd_usb_caiaq_input_free, free_urbs, kfree) already tolerate the partially-initialized state because the chip private area is zero-initialized by snd_card_new().

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Fix use-after-free in driver remove() In the remove callback, if a packet arrives after destroy_workqueue() is called, but before sock_release(), the qrtr_ns_data_ready() callback will try to queue the work, causing use-after-free issue. Fix this issue by saving the default 'sk_data_ready' callback during qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at the start of remove(). This ensures that even if a packet arrives after destroy_workqueue(), the work struct will not be dereferenced. Note that it is also required to ensure that the RX threads are completed before destroying the workqueue, because the threads could be using the qrtr_ns_data_ready() callback.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all() The commit c8e008b60492 ("ext4: ignore xattrs past end") introduced a refcount leak in when block_csum is false. ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to get iloc.bh, but never releases it with brelse().

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: skip reading rdevs that are not in_sync When reading bitmap pages from member disks, the code iterates through all rdevs and attempts to read from the first available one. However, it only checks for raid_disk assignment and Faulty flag, missing the In_sync flag check. This can cause bitmap data to be read from spare disks that are still being rebuilt and don't have valid bitmap information yet. Reading stale or uninitialized bitmap data from such disks can lead to incorrect dirty bit tracking, potentially causing data corruption during recovery or normal operation. Add the In_sync flag check to ensure bitmap pages are only read from fully synchronized member disks that have valid bitmap data.

In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size() underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store() weighted_interleave_auto_store() fetches old_wi_state inside the if (!input) block only. This causes two memory leaks: 1. When a user writes "false" and the current mode is already manual, the function returns early without freeing the freshly allocated new_wi_state. 2. When a user writes "true", old_wi_state stays NULL because the fetch is skipped entirely. The old state is then overwritten by rcu_assign_pointer() but never freed, since the cleanup path is gated on old_wi_state being non-NULL. A user can trigger this repeatedly by writing "1" in a loop. Fix both leaks by moving the old_wi_state fetch before the input check, making it unconditional. This also allows a unified early return for both "true" and "false" when the requested mode matches the current mode. Reviewed by: Donet Tom <donettom@linux.ibm.com>

In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review.

In the Linux kernel, the following vulnerability has been resolved: inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(), the error path calls inotify_remove_from_idr() but does not call dec_inotify_watches() to undo the preceding inc_inotify_watches(). This leaks a watch count, and repeated failures can exhaust the max_user_watches limit with -ENOSPC even when no watches are active. Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace limits"), the watch count was incremented after fsnotify_add_mark_locked() succeeded, so this path was not affected. The conversion moved inc_inotify_watches() before the mark insertion without adding the corresponding rollback. Add the missing dec_inotify_watches() call in the error path.

In the Linux kernel, the following vulnerability has been resolved: rxgk: Fix potential integer overflow in length check Fix potential integer overflow in rxgk_extract_token() when checking the length of the ticket. Rather than rounding up the value to be tested (which might overflow), round down the size of the available data.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Free the node during ctrl_cmd_bye() A node sends the BYE packet when it is about to go down. So the nameserver should advertise the removal of the node to all remote and local observers and free the node finally. But currently, the nameserver doesn't free the node memory even after processing the BYE packet. This causes the node memory to leak. Hence, remove the node from Xarray list and free the node memory during both success and failure case of ctrl_cmd_bye().

In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: validate reply type before using icmp_pointers Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type. That value is outside the range covered by icmp_pointers[], which only describes the traditional ICMP types up to NR_ICMP_TYPES. Avoid consulting icmp_pointers[] for reply types outside that range, and use array_index_nospec() for the remaining in-range lookup. Normal ICMP replies keep their existing behavior unchanged.

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the vdev->cdx_irqs array based on its value, but provides no serialization against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race such that one observes config_msi as set while another clears it and frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free of the cdx_irqs array. Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in vfio_cdx_set_msi_trigger(), which is the single chokepoint through which all updates to config_msi, cdx_irqs, and msi_count flow, covering both the ioctl path and the close-device cleanup path. This keeps the test of config_msi atomic with the subsequent enable, disable, or trigger operations. Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part of this change: the optimization it provided is redundant with the !config_msi early-return inside vfio_cdx_msi_disable(), and leaving the test in place would be an unsynchronized read of state the new lock is meant to protect.

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel.

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path Add validation to ensure MSI is configured before accessing cdx_irqs array in vfio_cdx_set_msi_trigger(). Without this check, userspace can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD. The vfio_cdx_msi_enable() function allocates the cdx_irqs array and sets config_msi to 1 only when called through the EVENTFD path. The trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been done, but there was no enforcement of this call ordering. This matches the protection used in the PCI VFIO driver where vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop.

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize.

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit() returns an error code that is ignored by most callers, and continues to run L1 with corrupted state. A sane recovery is not possible in this case, and HW behavior is to cause a shutdown. Inject a triple fault instead, and do not return early from nested_svm_vmexit(). Continue cleaning up the vCPU state (e.g. clear pending exceptions), to handle the failure as gracefully as possible. From the APM: Upon #VMEXIT, the processor performs the following actions in order to return to the host execution context: ... if (illegal host state loaded, or exception while loading host state) shutdown else execute first host instruction following the VMRUN Remove the return value of nested_svm_vmexit(), which is mostly unchecked anyway.

In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28

In the Linux kernel, the following vulnerability has been resolved: EDAC/versalnet: Fix device_node leak in mc_probe() of_parse_phandle() returns a device_node reference that must be released with of_node_put(). The original code never freed r5_core_node on any exit path, causing a memory leak. Fix this by using the automatic cleanup attribute __free(device_node) which ensures of_node_put() is called when the variable goes out of scope.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: return NULL early from kmalloc_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, kmalloc_nolock() called from NMI context can re-enter the slab allocator and acquire n->list_lock that the interrupted context is already holding, corrupting slab state. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 get_from_partial_node+0x120/0x4d0 ___slab_alloc+0x8a/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel.

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state.

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid early lgr access in smc_clc_wait_msg A CLC decline can be received while the handshake is still in an early stage, before the connection has been associated with a link group. The decline handling in smc_clc_wait_msg() updates link-group level sync state for first-contact declines, but that state only exists after link group setup has completed. Guard the link-group update accordingly and keep the per-socket peer diagnosis handling unchanged. This preserves the existing sync_err handling for established link-group contexts and avoids touching link-group state before it is available.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum number of lookups Current code does no bound checking on the number of lookups a client can perform. Though the code restricts the lookups to local clients, there is still a possibility of a malicious local client sending a flood of NEW_LOOKUP messages over the same socket. Fix this issue by limiting the maximum number of lookups to 64 globally. Since the nameserver allows only atmost one local observer, this global lookup count will ensure that the lookups stay within the limit. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damon_call() vs kdamond_fn() exit race Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race". damon_call() and damos_walk() can leak memory and/or deadlock when they race with kdamond terminations. Fix those. This patch (of 2); When kdamond_fn() main loop is finished, the function cancels all remaining damon_call() requests and unset the damon_ctx->kdamond so that API callers and API functions themselves can know the context is terminated. damon_call() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damon_call() starts waiting for the kdamond's handling of the newly added request. The damon_call() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damon_call() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damon_call() requests cancelling. Right after that, damon_call() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damon_call() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damon_call() caller threads infinitely waits. Fix this by introducing another damon_ctx field, namely call_controls_obsolete. It is protected by the damon_ctx->call_controls_lock, which protects damon_call() requests registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of remaining damon_call() requests is executed. damon_call() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. Note that the deadlock will not happen when damon_call() is called for repeat mode request. In tis case, damon_call() returns instead of waiting for the handling when the request registration succeeds and it shows the kdamond is running. However, if the request also has dealloc_on_cancel, the request memory would be leaked. The issue is found by sashiko [1].

In the Linux kernel, the following vulnerability has been resolved: libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply() If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both protocol and result, this is currently not treated as an error. In case of ac->negotiating == true and ac->protocol > 0, this leads to setting ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for ac->protocol != protocol returns false, and init_protocol() is not called. Subsequently, ac->ops->handle_reply() is called, which leads to a null pointer dereference, because ac->ops is still NULL. This patch changes the check for ac->protocol != protocol to !ac->protocol, as this also includes the case when the protocol was set to zero in the message. This causes the message to be treated as containing a bad auth protocol.

In the Linux kernel, the following vulnerability has been resolved: dm mirror: fix integer overflow in create_dirty_log() The argument count calculation in create_dirty_log() performs `*args_used = 2 + param_count` before validating against argc. When a user provides a param_count close to UINT_MAX via the device mapper table string, this unsigned addition wraps around to a small value, causing the subsequent `argc < *args_used` check to be bypassed. The overflowed param_count is then passed as argc to dm_dirty_log_create(), where it can cause out-of-bounds reads on the argv array. Fix by comparing param_count against argc - 2 before performing the addition, following the same pattern used by parse_features() in the same file. Since argc >= 2 is already guaranteed, the subtraction is safe.

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the first page using free_page(), leaking the remaining 3 pages. Use free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES parse_uac2_sample_rate_range() caps the number of enumerated rates at MAX_NR_RATES, but it only breaks out of the current rate loop. A malformed UAC2 RANGE response with additional triplets continues parsing the remaining triplets and repeatedly prints "invalid uac2 rates" while probe still holds register_mutex. Stop the whole parse once the cap is reached and return the number of rates collected so far.

In the Linux kernel, the following vulnerability has been resolved: mm: fix deferred split queue races during migration migrate_folio_move() records the deferred split queue state from src and replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0) makes dst visible before it is requeued, so a concurrent rmap-removal path can mark dst partially mapped and trip the WARN in deferred_split_folio(). Move the requeue before remove_migration_ptes() so dst is back on the deferred split queue before it becomes visible again. Because migration still holds dst locked at that point, teach deferred_split_scan() to requeue a folio when folio_trylock() fails. Otherwise a fully mapped underused folio can be dequeued by the shrinker and silently lost from split_queue. [ziy@nvidia.com: move the comment]

In the Linux kernel, the following vulnerability has been resolved: remoteproc: xlnx: Only access buffer information if IPI is buffered In the receive callback check if message is NULL to prevent possibility of crash by NULL pointer dereferencing.

In the Linux kernel, the following vulnerability has been resolved: tcp: call sk_data_ready() after listener migration When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely. Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop(). However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path. The reqsk_timer_handler() path does not need the same changes for two reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Add missing save/restore handling of LBR MSRs MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So save/restore is completely broken. Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to LBR MSRs from userspace only (as they are read-only MSRs) if LBR virtualization is enabled. Additionally, to correctly restore L1's LBRs while L2 is running, make sure the LBRs are copied from the captured VMCB01 save area in svm_copy_vmrun_state(). Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't reported as an MSR to save/restore. Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM already handles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM: Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph the unsupported userspace write into a nop). [sean: guard with lbrv checks, massage changelog]

In the Linux kernel, the following vulnerability has been resolved: mm/memfd_luo: fix physical address conversion in put_folios cleanup In memfd_luo_retrieve_folios()'s put_folios cleanup path: 1. kho_restore_folio() expects a phys_addr_t (physical address) but receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to check the wrong physical address (pfn << PAGE_SHIFT instead of the actual physical address). 2. This loop lacks the !pfolio->pfn check that exists in the main retrieval loop and memfd_luo_discard_folios(), which could incorrectly process sparse file holes where pfn=0. Fix by converting PFN to physical address with PFN_PHYS() and adding the !pfolio->pfn check, matching the pattern used elsewhere in this file. This issue was identified by the AI review. https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: fix use-after-free in release path due to uncancelled work The mtk_jpeg_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->jpeg_work. This creates a race window where the workqueue callback may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release) CPU 1 (workqueue) ---------------- ------------------ close() mtk_jpeg_release() mtk_jpegenc_worker() ctx = work->data // accessing ctx kfree(ctx) // freed! access ctx // UAF! The work is queued via queue_work() during JPEG encode/decode operations (via mtk_jpeg_device_run). If the device is closed while work is pending or running, the work handler will access freed memory. Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. This ordering is critical: if cancel_work_sync() is called after mutex_lock(), and the work handler also tries to acquire the same mutex, it would cause a deadlock. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during ioctl operations.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix error handling in rxgk_extract_token() Fix a missing bit of error handling in rxgk_extract_token(): in the event that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather than continuing on (for anything else, it generates an abort).

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to do later. This leads to an oops when .allow_link fails or when .drop_link is performed. Remove the helper. Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient.