System vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: powerpc/52xx: Fix a resource leak in an error handling path The error handling path of mpc52xx_lpbfifo_probe() has a request_irq() that is not balanced by a corresponding free_irq(). Add the missing call, as already done in the remove function.

In the Linux kernel, the following vulnerability has been resolved: MIPS: vpe-mt: fix possible memory leak while module exiting Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, it need be freed when module exiting, call put_device() to give up reference, so that it can be freed in kobject_cleanup() when the refcount hit to 0. The vpe_device is static, so remove kfree() from vpe_device_release().

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix PM runtime leakage in am65_cpsw_nuss_ndo_slave_open() Ensure pm_runtime_put() is issued in error path.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix xid leak in cifs_flock() If not flock, before return -ENOLCK, should free the xid, otherwise, the xid will be leaked.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() Fix a NULL pointer crash that occurs when we are freeing the socket at the same time we access it via sysfs. The problem is that: 1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold() does a get on the "struct sock". 2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put on the "struct socket" and that does __sock_release() which sets the sock->ops to NULL. 3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then call kernel_getpeername() which accesses the NULL sock->ops. Above we do a get on the "struct sock", but we needed a get on the "struct socket". Originally, we just held the frwd_lock the entire time but in commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()") we switched to refcount based because the network layer changed and started taking a mutex in that path, so we could no longer hold the frwd_lock. Instead of trying to maintain multiple refcounts, this just has us use a mutex for accessing the socket in the interface code paths.

In the Linux kernel, the following vulnerability has been resolved: clk: tegra: Fix refcount leak in tegra210_clock_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: mtd: core: Fix refcount error in del_mtd_device() del_mtd_device() will call of_node_put() to mtd_get_of_node(mtd), which is mtd->dev.of_node. However, memset(&mtd->dev, 0) is called before of_node_put(). As the result, of_node_put() won't do anything in del_mtd_device(), and causes the refcount leak. del_mtd_device() memset(&mtd->dev, 0, sizeof(mtd->dev) # clear mtd->dev of_node_put() mtd_get_of_node(mtd) # mtd->dev is cleared, can't locate of_node # of_node_put(NULL) won't do anything Fix the error by caching the pointer of the device_node. OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/spi-sram@0 CPU: 3 PID: 275 Comm: python3 Tainted: G N 6.1.0-rc3+ #54 0d8a1edddf51f172ff5226989a7565c6313b08e2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x67/0x83 kobject_get+0x155/0x160 of_node_get+0x1f/0x30 of_fwnode_get+0x43/0x70 fwnode_handle_get+0x54/0x80 fwnode_get_nth_parent+0xc9/0xe0 fwnode_full_name_string+0x3f/0xa0 device_node_string+0x30f/0x750 pointer+0x598/0x7a0 vsnprintf+0x62d/0x9b0 ... cfs_overlay_release+0x30/0x90 config_item_release+0xbe/0x1a0 config_item_put+0x5e/0x80 configfs_rmdir+0x3bd/0x540 vfs_rmdir+0x18c/0x320 do_rmdir+0x198/0x330 __x64_sys_rmdir+0x2c/0x40 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd [<miquel.raynal@bootlin.com>: Light reword of the commit log]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix resolving backrefs for inline extent followed by prealloc If a file consists of an inline extent followed by a regular or prealloc extent, then a legitimate attempt to resolve a logical address in the non-inline region will result in add_all_parents reading the invalid offset field of the inline extent. If the inline extent item is placed in the leaf eb s.t. it is the first item, attempting to access the offset field will not only be meaningless, it will go past the end of the eb and cause this panic: [17.626048] BTRFS warning (device dm-2): bad eb member end: ptr 0x3fd4 start 30834688 member offset 16377 size 8 [17.631693] general protection fault, probably for non-canonical address 0x5088000000000: 0000 [#1] SMP PTI [17.635041] CPU: 2 PID: 1267 Comm: btrfs Not tainted 5.12.0-07246-g75175d5adc74-dirty #199 [17.637969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [17.641995] RIP: 0010:btrfs_get_64+0xe7/0x110 [17.649890] RSP: 0018:ffffc90001f73a08 EFLAGS: 00010202 [17.651652] RAX: 0000000000000001 RBX: ffff88810c42d000 RCX: 0000000000000000 [17.653921] RDX: 0005088000000000 RSI: ffffc90001f73a0f RDI: 0000000000000001 [17.656174] RBP: 0000000000000ff9 R08: 0000000000000007 R09: c0000000fffeffff [17.658441] R10: ffffc90001f73790 R11: ffffc90001f73788 R12: ffff888106afe918 [17.661070] R13: 0000000000003fd4 R14: 0000000000003f6f R15: cdcdcdcdcdcdcdcd [17.663617] FS: 00007f64e7627d80(0000) GS:ffff888237c80000(0000) knlGS:0000000000000000 [17.666525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [17.668664] CR2: 000055d4a39152e8 CR3: 000000010c596002 CR4: 0000000000770ee0 [17.671253] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [17.673634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [17.676034] PKRU: 55555554 [17.677004] Call Trace: [17.677877] add_all_parents+0x276/0x480 [17.679325] find_parent_nodes+0xfae/0x1590 [17.680771] btrfs_find_all_leafs+0x5e/0xa0 [17.682217] iterate_extent_inodes+0xce/0x260 [17.683809] ? btrfs_inode_flags_to_xflags+0x50/0x50 [17.685597] ? iterate_inodes_from_logical+0xa1/0xd0 [17.687404] iterate_inodes_from_logical+0xa1/0xd0 [17.689121] ? btrfs_inode_flags_to_xflags+0x50/0x50 [17.691010] btrfs_ioctl_logical_to_ino+0x131/0x190 [17.692946] btrfs_ioctl+0x104a/0x2f60 [17.694384] ? selinux_file_ioctl+0x182/0x220 [17.695995] ? __x64_sys_ioctl+0x84/0xc0 [17.697394] __x64_sys_ioctl+0x84/0xc0 [17.698697] do_syscall_64+0x33/0x40 [17.700017] entry_SYSCALL_64_after_hwframe+0x44/0xae [17.701753] RIP: 0033:0x7f64e72761b7 [17.709355] RSP: 002b:00007ffefb067f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [17.712088] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f64e72761b7 [17.714667] RDX: 00007ffefb067fb0 RSI: 00000000c0389424 RDI: 0000000000000003 [17.717386] RBP: 00007ffefb06d188 R08: 000055d4a390d2b0 R09: 00007f64e7340a60 [17.719938] R10: 0000000000000231 R11: 0000000000000246 R12: 0000000000000001 [17.722383] R13: 0000000000000000 R14: 00000000c0389424 R15: 000055d4a38fd2a0 [17.724839] Modules linked in: Fix the bug by detecting the inline extent item in add_all_parents and skipping to the next extent item.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table() nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and free the memory.Thus, when nouveau_bo_init() returns an error, the gem object has already been released. Then the call to nouveau_bo_ref() will use the freed "nvbo->bo" and lead to a use-after-free bug. We should delete the call to nouveau_bo_ref() to avoid the use-after-free.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix NULL-pointer dereferences There are several places where we can crash the kernel by requesting lines, unbinding the GPIO device, then calling any of the system calls relevant to the GPIO character device's annonymous file descriptors: ioctl(), read(), poll(). While I observed it with the GPIO simulator, it will also happen for any of the GPIO devices that can be hot-unplugged - for instance any HID GPIO expander (e.g. CP2112). This affects both v1 and v2 uAPI. This fixes it partially by checking if gdev->chip is not NULL but it doesn't entirely remedy the situation as we still have a race condition in which another thread can remove the device after the check.

In the Linux kernel, the following vulnerability has been resolved: net: sched: cake: fix null pointer access issue when cake_init() fails When the default qdisc is cake, if the qdisc of dev_queue fails to be inited during mqprio_init(), cake_reset() is invoked to clear resources. In this case, the tins is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() cake_init() q->tins = kvcalloc(...) --->failed, q->tins is NULL ... qdisc_put() ... cake_reset() ... cake_dequeue_one() b = &q->tins[...] --->q->tins is NULL The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:cake_dequeue_one+0xc9/0x3c0 Call Trace: <TASK> cake_reset+0xb1/0x140 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f89e5122d04 </TASK>

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix memory leak on ntfs_fill_super() error path syzbot reported kmemleak as below: BUG: memory leak unreferenced object 0xffff8880122f1540 (size 32): comm "a.out", pid 6664, jiffies 4294939771 (age 25.500s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 ed ff ed ff 00 00 00 00 ................ backtrace: [<ffffffff81b16052>] ntfs_init_fs_context+0x22/0x1c0 [<ffffffff8164aaa7>] alloc_fs_context+0x217/0x430 [<ffffffff81626dd4>] path_mount+0x704/0x1080 [<ffffffff81627e7c>] __x64_sys_mount+0x18c/0x1d0 [<ffffffff84593e14>] do_syscall_64+0x34/0xb0 [<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by freeing mount options on error path of ntfs_fill_super().

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix memory leak in _samsung_clk_register_pll() If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

In the Linux kernel, the following vulnerability has been resolved: mm/uffd: fix warning without PTE_MARKER_UFFD_WP compiled in When PTE_MARKER_UFFD_WP not configured, it's still possible to reach pte marker code and trigger an warning. Add a few CONFIG_PTE_MARKER_UFFD_WP ifdefs to make sure the code won't be reached when not compiled in.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix crash on hci_create_cis_sync When attempting to connect multiple ISO sockets without using DEFER_SETUP may result in the following crash: BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0 Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50 CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted 6.0.0-rc7-02243-gb84a13ff4eda #4373 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x19/0x27 kasan_report+0xbc/0xf0 ? hci_create_cis_sync+0x18b/0x2b0 hci_create_cis_sync+0x18b/0x2b0 ? get_link_mode+0xd0/0xd0 ? __ww_mutex_lock_slowpath+0x10/0x10 ? mutex_lock+0xe0/0xe0 ? get_link_mode+0xd0/0xd0 hci_cmd_sync_work+0x111/0x190 process_one_work+0x427/0x650 worker_thread+0x87/0x750 ? process_one_work+0x650/0x650 kthread+0x14e/0x180 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ARC: mm: fix leakage of memory allocated for PTE Since commit d9820ff ("ARC: mm: switch pgtable_t back to struct page *") a memory leakage problem occurs. Memory allocated for page table entries not released during process termination. This issue can be reproduced by a small program that allocates a large amount of memory. After several runs, you'll see that the amount of free memory has reduced and will continue to reduce after each run. All ARC CPUs are effected by this issue. The issue was introduced since the kernel stable release v5.15-rc1. As described in commit d9820ff after switch pgtable_t back to struct page *, a pointer to "struct page" and appropriate functions are used to allocate and free a memory page for PTEs, but the pmd_pgtable macro hasn't changed and returns the direct virtual address from the PMD (PGD) entry. Than this address used as a parameter in the __pte_free() and as a result this function couldn't release memory page allocated for PTEs. Fix this issue by changing the pmd_pgtable macro and returning pointer to struct page.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate the box size for the snooped cursor Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate buffer length while parsing index indx_read is called when we have some NTFS directory operations that need more information from the index buffers. This adds a sanity check to make sure the returned index buffer length is legit, or we may have some out-of-bound memory accesses. [ 560.897595] BUG: KASAN: slab-out-of-bounds in hdr_find_e.isra.0+0x10c/0x320 [ 560.898321] Read of size 2 at addr ffff888009497238 by task exp/245 [ 560.898760] [ 560.899129] CPU: 0 PID: 245 Comm: exp Not tainted 6.0.0-rc6 #37 [ 560.899505] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 560.900170] Call Trace: [ 560.900407] <TASK> [ 560.900732] dump_stack_lvl+0x49/0x63 [ 560.901108] print_report.cold+0xf5/0x689 [ 560.901395] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.901716] kasan_report+0xa7/0x130 [ 560.901950] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.902208] __asan_load2+0x68/0x90 [ 560.902427] hdr_find_e.isra.0+0x10c/0x320 [ 560.902846] ? cmp_uints+0xe0/0xe0 [ 560.903363] ? cmp_sdh+0x90/0x90 [ 560.903883] ? ntfs_bread_run+0x190/0x190 [ 560.904196] ? rwsem_down_read_slowpath+0x750/0x750 [ 560.904969] ? ntfs_fix_post_read+0xe0/0x130 [ 560.905259] ? __kasan_check_write+0x14/0x20 [ 560.905599] ? up_read+0x1a/0x90 [ 560.905853] ? indx_read+0x22c/0x380 [ 560.906096] indx_find+0x2ef/0x470 [ 560.906352] ? indx_find_buffer+0x2d0/0x2d0 [ 560.906692] ? __kasan_kmalloc+0x88/0xb0 [ 560.906977] dir_search_u+0x196/0x2f0 [ 560.907220] ? ntfs_nls_to_utf16+0x450/0x450 [ 560.907464] ? __kasan_check_write+0x14/0x20 [ 560.907747] ? mutex_lock+0x8f/0xe0 [ 560.907970] ? __mutex_lock_slowpath+0x20/0x20 [ 560.908214] ? kmem_cache_alloc+0x143/0x4b0 [ 560.908459] ntfs_lookup+0xe0/0x100 [ 560.908788] __lookup_slow+0x116/0x220 [ 560.909050] ? lookup_fast+0x1b0/0x1b0 [ 560.909309] ? lookup_fast+0x13f/0x1b0 [ 560.909601] walk_component+0x187/0x230 [ 560.909944] link_path_walk.part.0+0x3f0/0x660 [ 560.910285] ? handle_lookup_down+0x90/0x90 [ 560.910618] ? path_init+0x642/0x6e0 [ 560.911084] ? percpu_counter_add_batch+0x6e/0xf0 [ 560.912559] ? __alloc_file+0x114/0x170 [ 560.913008] path_openat+0x19c/0x1d10 [ 560.913419] ? getname_flags+0x73/0x2b0 [ 560.913815] ? kasan_save_stack+0x3a/0x50 [ 560.914125] ? kasan_save_stack+0x26/0x50 [ 560.914542] ? __kasan_slab_alloc+0x6d/0x90 [ 560.914924] ? kmem_cache_alloc+0x143/0x4b0 [ 560.915339] ? getname_flags+0x73/0x2b0 [ 560.915647] ? getname+0x12/0x20 [ 560.916114] ? __x64_sys_open+0x4c/0x60 [ 560.916460] ? path_lookupat.isra.0+0x230/0x230 [ 560.916867] ? __isolate_free_page+0x2e0/0x2e0 [ 560.917194] do_filp_open+0x15c/0x1f0 [ 560.917448] ? may_open_dev+0x60/0x60 [ 560.917696] ? expand_files+0xa4/0x3a0 [ 560.917923] ? __kasan_check_write+0x14/0x20 [ 560.918185] ? _raw_spin_lock+0x88/0xdb [ 560.918409] ? _raw_spin_lock_irqsave+0x100/0x100 [ 560.918783] ? _find_next_bit+0x4a/0x130 [ 560.919026] ? _raw_spin_unlock+0x19/0x40 [ 560.919276] ? alloc_fd+0x14b/0x2d0 [ 560.919635] do_sys_openat2+0x32a/0x4b0 [ 560.920035] ? file_open_root+0x230/0x230 [ 560.920336] ? __rcu_read_unlock+0x5b/0x280 [ 560.920813] do_sys_open+0x99/0xf0 [ 560.921208] ? filp_open+0x60/0x60 [ 560.921482] ? exit_to_user_mode_prepare+0x49/0x180 [ 560.921867] __x64_sys_open+0x4c/0x60 [ 560.922128] do_syscall_64+0x3b/0x90 [ 560.922369] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.923030] RIP: 0033:0x7f7dff2e4469 [ 560.923681] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 560.924451] RSP: 002b:00007ffd41a210b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000002 [ 560.925168] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7dff2e4469 [ 560.925655] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Lag, fix failure to cancel delayed bond work Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: lvds: fix PM usage counter unbalance in poweron pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with the newest pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: xfrm: Reinject transport-mode packets through workqueue The following warning is displayed when the tcp6-multi-diffip11 stress test case of the LTP test suite is tested: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198] CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : des3_ede_encrypt+0x27c/0x460 [libdes] lr : 0x3f sp : ffff80000ceaa1b0 x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e51e5280 x26: ffff80004df75030 x25: ffff0000e51e4600 x24: 000000000000003b x23: 0000000000802080 x22: 000000000000003d x21: 0000000000000038 x20: 0000000080000020 x19: 000000000000000a x18: 0000000000000033 x17: ffff0000e51e4780 x16: ffff80004e2d1448 x15: ffff80004e2d1248 x14: ffff0000e51e4680 x13: ffff80004e2d1348 x12: ffff80004e2d1548 x11: ffff80004e2d1848 x10: ffff80004e2d1648 x9 : ffff80004e2d1748 x8 : ffff80004e2d1948 x7 : 000000000bcaf83d x6 : 000000000000001b x5 : ffff80004e2d1048 x4 : 00000000761bf3bf x3 : 000000007f1dd0a3 x2 : ffff0000e51e4780 x1 : ffff0000e3b9a2f8 x0 : 00000000db44e872 Call trace: des3_ede_encrypt+0x27c/0x460 [libdes] crypto_des3_ede_encrypt+0x1c/0x30 [des_generic] crypto_cbc_encrypt+0x148/0x190 crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp6_output_tail+0x1c8/0x5d0 [esp6] esp6_output+0x120/0x278 [esp6] xfrm_output_one+0x458/0x4ec xfrm_output_resume+0x6c/0x1f0 xfrm_output+0xac/0x4ac __xfrm6_output+0x130/0x270 xfrm6_output+0x60/0xec ip6_xmit+0x2ec/0x5bc inet6_csk_xmit+0xbc/0x10c __tcp_transmit_skb+0x460/0x8c0 tcp_write_xmit+0x348/0x890 __tcp_push_pending_frames+0x44/0x110 tcp_rcv_established+0x3c8/0x720 tcp_v6_do_rcv+0xdc/0x4a0 tcp_v6_rcv+0xc24/0xcb0 ip6_protocol_deliver_rcu+0xf0/0x574 ip6_input_finish+0x48/0x7c ip6_input+0x48/0xc0 ip6_rcv_finish+0x80/0x9c xfrm_trans_reinject+0xb0/0xf4 tasklet_action_common.constprop.0+0xf8/0x134 tasklet_action+0x30/0x3c __do_softirq+0x128/0x368 do_softirq+0xb4/0xc0 __local_bh_enable_ip+0xb0/0xb4 put_cpu_fpsimd_context+0x40/0x70 kernel_neon_end+0x20/0x40 sha1_base_do_update.constprop.0.isra.0+0x11c/0x140 [sha1_ce] sha1_ce_finup+0x94/0x110 [sha1_ce] crypto_shash_finup+0x34/0xc0 hmac_finup+0x48/0xe0 crypto_shash_finup+0x34/0xc0 shash_digest_unaligned+0x74/0x90 crypto_shash_digest+0x4c/0x9c shash_ahash_digest+0xc8/0xf0 shash_async_digest+0x28/0x34 crypto_ahash_digest+0x48/0xcc crypto_authenc_genicv+0x88/0xcc [authenc] crypto_authenc_encrypt+0xd8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp6_output_tail+0x1c8/0x5d0 [esp6] esp6_output+0x120/0x278 [esp6] xfrm_output_one+0x458/0x4ec xfrm_output_resume+0x6c/0x1f0 xfrm_output+0xac/0x4ac __xfrm6_output+0x130/0x270 xfrm6_output+0x60/0xec ip6_xmit+0x2ec/0x5bc inet6_csk_xmit+0xbc/0x10c __tcp_transmit_skb+0x460/0x8c0 tcp_write_xmit+0x348/0x890 __tcp_push_pending_frames+0x44/0x110 tcp_push+0xb4/0x14c tcp_sendmsg_locked+0x71c/0xb64 tcp_sendmsg+0x40/0x6c inet6_sendmsg+0x4c/0x80 sock_sendmsg+0x5c/0x6c __sys_sendto+0x128/0x15c __arm64_sys_sendto+0x30/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x170/0x194 do_el0_svc+0x38/0x4c el0_svc+0x28/0xe0 el0t_64_sync_handler+0xbc/0x13c el0t_64_sync+0x180/0x184 Get softirq info by bcc tool: ./softirqs -NT 10 Tracing soft irq event time... Hit Ctrl-C to end. 15:34:34 SOFTIRQ TOTAL_nsecs block 158990 timer 20030920 sched 46577080 net_rx 676746820 tasklet 9906067650 15:34:45 SOFTIRQ TOTAL_nsecs block 86100 sched 38849790 net_rx ---truncated---

In the Linux kernel, the following vulnerability has been resolved: clk: tegra20: Fix refcount leak in tegra20_clock_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix possible memleak when register 'hctx' failed There's issue as follows when do fault injection test: unreferenced object 0xffff888132a9f400 (size 512): comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff ...........2.... 08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00 ...2............ backtrace: [<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0 [<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0 [<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230 [<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910 [<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0 [<00000000a2a34657>] 0xffffffffa2ad310f [<00000000b173f718>] 0xffffffffa2af824a [<0000000095a1dabb>] do_one_initcall+0x87/0x2a0 [<00000000f32fdf93>] do_init_module+0xdf/0x320 [<00000000cbe8541e>] load_module+0x3006/0x3390 [<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0 [<00000000a1a29ae8>] do_syscall_64+0x35/0x80 [<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fault injection context as follows: kobject_add blk_mq_register_hctx blk_mq_sysfs_register blk_register_queue device_add_disk null_add_dev.part.0 [null_blk] As 'blk_mq_register_hctx' may already add some objects when failed halfway, but there isn't do fallback, caller don't know which objects add failed. To solve above issue just do fallback when add objects failed halfway in 'blk_mq_register_hctx'.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8173: Enable IRQ when pdata is ready If the device does not come straight from reset, we might receive an IRQ before we are ready to handle it. [ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4 [ 2.522601] Call trace: [ 2.525040] regmap_read+0x1c/0x80 [ 2.528434] mt8173_afe_irq_handler+0x40/0xf0 ... [ 2.598921] start_kernel+0x338/0x42c

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix memory leak when reading function table When the input parameter idx meets the expected case option in hinic_dbg_get_func_table(), read_data is not released. Fix it.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: fix memory corruption with too many bridges Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Patchwork: https://patchwork.freedesktop.org/patch/502670/

In the Linux kernel, the following vulnerability has been resolved: ext4: don't set up encryption key during jbd2 transaction Commit a80f7fcf1867 ("ext4: fixup ext4_fc_track_* functions' signature") extended the scope of the transaction in ext4_unlink() too far, making it include the call to ext4_find_entry(). However, ext4_find_entry() can deadlock when called from within a transaction because it may need to set up the directory's encryption key. Fix this by restoring the transaction to its original scope.

In the Linux kernel, the following vulnerability has been resolved: efi: ssdt: Don't free memory if ACPI table was loaded successfully Amadeusz reports KASAN use-after-free errors introduced by commit 3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from variables"). The problem appears to be that the memory that holds the new ACPI table is now freed unconditionally, instead of only when the ACPI core reported a failure to load the table. So let's fix this, by omitting the kfree() on success.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid crash when inline data creation follows DIO write When inode is created and written to using direct IO, there is nothing to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets truncated later to say 1 byte and written using normal write, we will try to store the data as inline data. This confuses the code later because the inode now has both normal block and inline data allocated and the confusion manifests for example as: kernel BUG at fs/ext4/inode.c:2721! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:ext4_writepages+0x363d/0x3660 RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293 RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180 RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000 RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128 R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001 FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0 Call Trace: <TASK> do_writepages+0x397/0x640 filemap_fdatawrite_wbc+0x151/0x1b0 file_write_and_wait_range+0x1c9/0x2b0 ext4_sync_file+0x19e/0xa00 vfs_fsync_range+0x17b/0x190 ext4_buffered_write_iter+0x488/0x530 ext4_file_write_iter+0x449/0x1b90 vfs_write+0xbcd/0xf40 ksys_write+0x198/0x2c0 __x64_sys_write+0x7b/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing direct IO write to a file.

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here. Ensure that we mark current as TASK_RUNNING for sleepable context. [ 77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0 [ 77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160 [ 77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G OE 6.1.0-rc5 #1 [ 77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 77.554912] RIP: 0010:__might_sleep+0x116/0x160 [ 77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282 [ 77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000 [ 77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9 [ 77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba [ 77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60 [ 77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660 [ 77.554934] FS: 0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000 [ 77.554937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0 [ 77.554942] Call Trace: [ 77.554944] <TASK> [ 77.554952] mutex_lock+0x78/0xf0 [ 77.554973] vub300_enable_sdio_irq+0x103/0x3c0 [vub300] [ 77.554981] sdio_irq_thread+0x25c/0x5b0 [ 77.555006] kthread+0x2b8/0x370 [ 77.555017] ret_from_fork+0x1f/0x30 [ 77.555023] </TASK> [ 77.555025] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings() We should add the of_node_put() when breaking out of for_each_child_of_node() as it will automatically increase and decrease the refcount.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_dsp_rproc: Add mutex protection for workqueue The workqueue may execute late even after remoteproc is stopped or stopping, some resources (rpmsg device and endpoint) have been released in rproc_stop_subdevices(), then rproc_vq_interrupt() accessing these resources will cause kennel dump. Call trace: virtqueue_add_split+0x1ac/0x560 virtqueue_add_inbuf+0x4c/0x60 rpmsg_recv_done+0x15c/0x294 vring_interrupt+0x6c/0xa4 rproc_vq_interrupt+0x30/0x50 imx_dsp_rproc_vq_work+0x24/0x40 [imx_dsp_rproc] process_one_work+0x1d0/0x354 worker_thread+0x13c/0x470 kthread+0x154/0x160 ret_from_fork+0x10/0x20 Add mutex protection in imx_dsp_rproc_vq_work(), if the state is not running, then just skip calling rproc_vq_interrupt(). Also the flush workqueue operation can't be added in rproc stop for the same reason. The call sequence is rproc_shutdown -> rproc_stop ->rproc_stop_subdevices ->rproc->ops->stop() ->imx_dsp_rproc_stop ->flush_work -> rproc_vq_interrupt The resource needed by rproc_vq_interrupt has been released in rproc_stop_subdevices, so flush_work is not safe to be called in imx_dsp_rproc_stop.

In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev() dev_set_name() in soundbus_add_one() allocates memory for name, it need be freed when of_device_register() fails, call soundbus_dev_put() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. And other resources are also freed in i2sbus_release_dev(), so it can return 0 directly.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one errors in fast-commit block filling Due to several different off-by-one errors, or perhaps due to a late change in design that wasn't fully reflected in the code that was actually merged, there are several very strange constraints on how fast-commit blocks are filled with tlv entries: - tlvs must start at least 10 bytes before the end of the block, even though the minimum tlv length is 8. Otherwise, the replay code will ignore them. (BUG: ext4_fc_reserve_space() could violate this requirement if called with a len of blocksize - 9 or blocksize - 8. Fortunately, this doesn't seem to happen currently.) - tlvs must end at least 1 byte before the end of the block. Otherwise the replay code will consider them to be invalid. This quirk contributed to a bug (fixed by an earlier commit) where uninitialized memory was being leaked to disk in the last byte of blocks. Also, strangely these constraints don't apply to the replay code in e2fsprogs, which will accept any tlvs in the blocks (with no bounds checks at all, but that is a separate issue...). Given that this all seems to be a bug, let's fix it by just filling blocks with tlv entries in the natural way. Note that old kernels will be unable to replay fast-commit journals created by kernels that have this commit.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ac97: fix possible memory leak in snd_ac97_dev_register() If device_register() fails in snd_ac97_dev_register(), it should call put_device() to give up reference, or the name allocated in dev_set_name() is leaked.

In the Linux kernel, the following vulnerability has been resolved: kernfs: fix use-after-free in __kernfs_remove Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 </TASK> Allocated by task 855: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly When an extended state component is not present in fpstate, but in init state, the function copies from init_fpstate via copy_feature(). But, dynamic states are not present in init_fpstate because of all-zeros init states. Then retrieving them from init_fpstate will explode like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:memcpy_erms+0x6/0x10 ? __copy_xstate_to_uabi_buf+0x381/0x870 fpu_copy_guest_fpstate_to_uabi+0x28/0x80 kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm] ? __this_cpu_preempt_check+0x13/0x20 ? vmx_vcpu_put+0x2e/0x260 [kvm_intel] kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? __fget_light+0xd4/0x130 __x64_sys_ioctl+0xe3/0x910 ? debug_smp_processor_id+0x17/0x20 ? fpregs_assert_state_consistent+0x27/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Adjust the 'mask' to zero out the userspace buffer for the features that are not available both from fpstate and from init_fpstate. The dynamic features depend on the compacted XSAVE format. Ensure it is enabled before reading XCOMP_BV in init_fpstate.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() Fixed coverity issue with resource leaks at variable "fw" going out of scope leaks the storage it points to mt7921_check_offload_capability(). Addresses-Coverity-ID: 1527806 ("Resource leaks")

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() There is an use-after-free reported by KASAN: BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82 Read of size 1 at addr ffff888112afc460 by task modprobe/2111 CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), Call Trace: <TASK> kasan_report+0xae/0xe0 acpi_ut_remove_reference+0x3b/0x82 acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5 acpi_ds_store_object_to_local+0x15d/0x3a0 acpi_ex_store+0x78d/0x7fd acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b acpi_ps_parse_aml+0x217/0x8d5 ... </TASK> The root cause of the problem is that the acpi_operand_object is freed when acpi_ut_walk_package_tree() fails in acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in acpi_ut_copy_iobject_to_iobject(). The problem was introduced by "8aa5e56eeb61" commit, this commit is to fix memory leak in acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove operation, lead to "acpi_operand_object" used after free. Fix it by removing acpi_ut_remove_reference() in acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage() is called to copy an internal package object into another internal package object, when it fails, the memory of acpi_operand_object should be freed by the caller.

In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete "slow_task->timer". However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below: (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ... sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the "task->slow_task" is deallocated.

In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Avoid double destroy of default endpoint The rpmsg_dev_remove() in rpmsg_core is the place for releasing this default endpoint. So need to avoid destroying the default endpoint in rpmsg_chrdev_eptdev_destroy(), this should be the same as rpmsg_eptdev_release(). Otherwise there will be double destroy issue that ept->refcount report warning: refcount_t: underflow; use-after-free. Call trace: refcount_warn_saturate+0xf8/0x150 virtio_rpmsg_destroy_ept+0xd4/0xec rpmsg_dev_remove+0x60/0x70 The issue can be reproduced by stopping remoteproc before closing the /dev/rpmsgX.

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/hpre - fix resource leak in remove process In hpre_remove(), when the disable operation of qm sriov failed, the following logic should continue to be executed to release the remaining resources that have been allocated, instead of returning directly, otherwise there will be resource leakage.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix UBSAN shift-out-of-bounds warning If get_num_sdma_queues or get_num_xgmi_sdma_queues is 0, we end up doing a shift operation where the number of bits shifted equals number of bits in the operand. This behaviour is undefined. Set num_sdma_queues or num_xgmi_sdma_queues to ULLONG_MAX, if the count is >= number of bits in the operand. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1472

In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: ensure data length is within supported range Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer' to ensure the data length isn't within the supported range. In particular a data length of 0 is not supported by the hardware and causes unintended or destructive behaviour. This limitation becomes obvious when looking at the register documentation [1]. 4 bits are reserved for DATA_WIDTH and the value of these 4 bits is used as N + 1, allowing a data length range of 1 <= len <= 16. Affected by this is the SMBus Quick Operation which works with a data length of 0. Passing 0 as the length causes an underflow of the value due to: (len - 1) & 0xf and effectively specifying a transfer length of 16 via the registers. This causes a 16-byte write operation instead of a Quick Write. For example, on SFP modules without write-protected EEPROM this soft-bricks them by overwriting some initial bytes. For completeness, also add a quirk for the zero length. [1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2

In the Linux kernel, the following vulnerability has been resolved: ceph: fix race condition validating r_parent before applying state Add validation to ensure the cached parent directory inode matches the directory info in MDS replies. This prevents client-side race conditions where concurrent operations (e.g. rename) cause r_parent to become stale between request initiation and reply processing, which could lead to applying state changes to incorrect directory inodes. [ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]

In the Linux kernel, the following vulnerability has been resolved: genetlink: fix genl_bind() invoking bind() after -EPERM Per family bind/unbind callbacks were introduced to allow families to track multicast group consumer presence, e.g. to start or stop producing events depending on listeners. However, in genl_bind() the bind() callback was invoked even if capability checks failed and ret was set to -EPERM. This means that callbacks could run on behalf of unauthorized callers while the syscall still returned failure to user space. Fix this by only invoking bind() after "if (ret) break;" check i.e. after permission checks have succeeded.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label]

In the Linux kernel, the following vulnerability has been resolved: erofs: fix invalid algorithm for encoded extents The current algorithm sanity checks do not properly apply to new encoded extents. Unify the algorithm check with Z_EROFS_COMPRESSION(_RUNTIME)_MAX and ensure consistency with sbi->available_compr_algs.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/

In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix incorrect map used in eee linkmode incorrectly used ixgbe_lp_map in loops intended to populate the supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map. This results in incorrect bit setting and potential out-of-bounds access, since ixgbe_lp_map and ixgbe_ls_map have different sizes and purposes. ixgbe_lp_map[i] -> ixgbe_ls_map[i] Use ixgbe_ls_map for supported and advertised linkmodes, and keep ixgbe_lp_map usage only for link partner (lp_advertised) mapping.