Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called.

In the Linux kernel, the following vulnerability has been resolved: ethtool: module: call ethnl_ops_complete() on module flash errors When validate() fails we are skipping over ethnl_ops_complete() even tho we already called ethnl_ops_begin().

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation.

In the Linux kernel, the following vulnerability has been resolved: ethtool: module: avoid leaking a netdev ref on module flash errors module_flash_fw_schedule() is missing undo for setting the "in_progress" flag and taking the netdev reference. Delay taking these, the device can't disappear while we are holding rtnl_lock.

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there.

In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.

In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko.

In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine.

In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails.

In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c.

In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port and NHID: Only require RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the three STP related attributes that require it. This is consistent with the multicast attributes where each attribute acquires the multicast lock instead of having one critical section for all relevant attributes. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 2 locks held by bridge/356: #0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002) #1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) br_setport (net/bridge/br_netlink.c:1000) br_setlink (net/bridge/br_netlink.c:1118) rtnl_bridge_setlink (net/core/rtnetlink.c:5572) rtnetlink_rcv_msg (net/core/rtnetlink.c:7005) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries).

In the Linux kernel, the following vulnerability has been resolved: ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure The goto err label leads to: genlmsg_cancel(skb, ehdr); return ret; If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg. There's nothing to cancel, and passing an error pointer to genlmsg_cancel() would cause a crash.

In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Add NULL guards in teardown path to prevent panic on attach failure When queue allocation fails partway through, the error cleanup frees and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as mana_remove(), mana_change_mtu() recovery, and internal error handling in mana_alloc_queues() can subsequently call into functions that dereference these pointers without NULL checks: - mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26). - mana_destroy_vport() iterates apc->rxqs without a NULL check. - mana_fence_rqs() iterates apc->rxqs without a NULL check. - mana_dealloc_queues() iterates apc->tx_qp without a NULL check. Add NULL guards for apc->rxqs in mana_fence_rqs(), mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue draining when TX queues were never allocated or already freed.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Skip redundant detach on already-detached port When mana_per_port_queue_reset_work_handler() runs after a previous detach succeeded but attach failed, the port is left in a detached state with apc->tx_qp and apc->rxqs already freed. Calling mana_detach() again unconditionally leads to NULL pointer dereferences during queue teardown. Add an early exit in mana_detach() when the port is already in detached state (!netif_device_present) for non-close callers, making it safe to call idempotently. This allows the queue reset handler and other recovery paths to simply retry mana_attach() without redundant teardown.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2 (which traps) or ZCR_EL1 (which does not trap). KVM handles both in different way: - on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own VL limit. This has the potential to break existing SW that relies on the full LEN field to be stateful. - on ZCR_EL1 access, we do absolutely nothing. On restoring the SVE context for an L2 guest, we directly restore the guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the guest's view of the register was updated using the ZCR_EL2 accessor, the value has already been sanitised (with the caveat mentioned above). But if the guest used ZCR_EL1, the raw value is written into the HW, and the L2 guest can now access VLs that it shouldn't. Fix all the above by moving the VL capping to the restore points, ensuring that: - the HW is always programmed with a capped value, irrespective of the accessor being used, - the ZCR_EL2.LEN field is always completely stateful, irrespective of the accessor being used. Additionally, move ZCR_EL2 to be a sanitised register, ensuring that only the LEN field is actually stateful. This requires some creative construction of the RES0 mask, as the sysreg generation script does not yet generate RAZ/WI fields. [maz: rewrote commit message, tidy up access_zcr_el2()]

In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: fix tail fragment offset in bpf_msg_push_data When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry.

In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.)

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prefer NLA_NUL_STRING These attributes are evaluated as c-string (passed to strcmp), but NLA_STRING doesn't check for the presence of a \0 terminator. Either this needs to switch to nla_strcmp() and needs to adjust printf fmt specifier to not use plain %s, or this needs to use NLA_NUL_STRING. As the code has been this way for long time, it seems to me that userspace does include the terminating nul, even tough its not enforced so far, and thus NLA_NUL_STRING use is the simpler solution.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.3 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 2f6afc97d259d530f4f86c7743efbc573a8da927)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit f05d0a4f21fc720116d6e238f23308b199891058)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 0f43893d3cd478fa57836697525b338817c9c23d)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.1 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 742a98e2e81702df8fe1b1eccee5223220a03dc2)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 86ac011ae234c03fb872f4945913391ea1d8862e)

In the Linux kernel, the following vulnerability has been resolved: ntfs3: reject direct userspace writes to reserved $LX* xattrs NTFS3 uses $LXUID, $LXGID, $LXMOD and $LXDEV as internal WSL permission metadata and reloads them into i_uid, i_gid and i_mode from ntfs_get_wsl_perm(). Because the empty-prefix xattr handler also lets file owners call setxattr() on these names directly, an unprivileged writer on a writable ntfs3 mount can plant root ownership and S_ISUID on their own file and gain euid 0 after inode reload. Reject direct userspace writes to the reserved $LX* names. Internal ntfs3 metadata updates are unchanged because ntfs_save_wsl_perm() writes them via ntfs_set_ea() directly. [almaz.alexandrovich@paragon-software.com: added an additional check for non privileged users]

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib]

In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis.

In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting.

In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK.

In the Linux kernel, the following vulnerability has been resolved: KEYS: fix overflow in keyctl_pkey_params_get_2() The length for the internal output buffer is calculated incorrectly, which can result overflow when a too small buffer is provided. Fix the bug by allocating internal output with the size of the maximum length of the cryptographic primitive instead of caller provided size.

In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.]

In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Under that setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: <TASK> ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> With this fix applied on top of the same test setup, rerunning the reproducer with fail-nth=1 yields no corresponding Oops reports.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim.