Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize new folios before use KMSAN reports an uninitialized value in longest_match_std(), invoked from ntfs_compress_write(). When new folios are allocated without being marked uptodate and ni_read_frame() is skipped because the caller expects the frame to be completely overwritten, some reserved folios may remain only partially filled, leaving the rest memory uninitialized.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix deadlock in ni_read_folio_cmpr Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr). This is caused by a lock inversion deadlock involving the inode mutex (ni_lock) and page locks. Scenario: 1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock. 2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in the compressed frame (including page Y). 3. Concurrently, Task B (e.g., via readahead) has locked page Y and calls ntfs_read_folio(). 4. Task B waits for ni_lock (held by A). 5. Task A waits for page Y lock (held by B). -> DEADLOCK. The fix is to restructure locking: do not take ni_lock in ntfs_read_folio(). Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required page locks for the frame have been successfully acquired. This restores the correct lock ordering (Page Lock -> ni_lock) consistent with VFS. [almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr]

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential NULL pointer dereference in context cleanup aie_destroy_context() is invoked during error handling in aie2_create_context(). However, aie_destroy_context() assumes that the context's mailbox channel pointer is non-NULL. If mailbox channel creation fails, the pointer remains NULL and calling aie_destroy_context() can lead to a NULL pointer dereference. In aie2_create_context(), replace aie_destroy_context() with a function which request firmware to remove the context created previously.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug This patch removes the MCU halt and wait for halt procedures during panthor_fw_unplug() as the MCU can be in a variety of states or the FW may not even be loaded/initialized at all, the latter of which can lead to a NULL pointer dereference. It should be safe on unplug to just disable the MCU without waiting for it to halt as it may not be able to.

In the Linux kernel, the following vulnerability has been resolved: ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec() KASAN reported a stack-out-of-bounds access in ima_appraise_measurement from is_bprm_creds_for_exec: BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0 Read of size 1 at addr ffffc9000160f940 by task sudo/550 The buggy address belongs to stack of task sudo/550 and is located at offset 24 in frame: ima_appraise_measurement+0x0/0x16a0 This frame has 2 objects: [48, 56) 'file' [80, 148) 'hash' This is caused by using container_of on the *file pointer. This offset calculation is what triggers the stack-out-of-bounds error. In order to fix this, pass in a bprm_is_check boolean which can be set depending on how process_measurement is called. If the caller has a linux_binprm pointer and the function is BPRM_CHECK we can determine is_check and set it then. Otherwise set it to false.

In the Linux kernel, the following vulnerability has been resolved: drm/display/dp_mst: Add protection against 0 vcpi When releasing a timeslot there is a slight chance we may end up with the wrong payload mask due to overflow if the delayed_destroy_work ends up coming into play after a DP 2.1 monitor gets disconnected which causes vcpi to become 0 then we try to make the payload = ~BIT(vcpi - 1) which is a negative shift. VCPI id should never really be 0 hence skip changing the payload mask if VCPI is 0. Otherwise it leads to <7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc [drm_display_helper]] port ffff888126ce9000 (3) <4> [515.287267] -----------[ cut here ]----------- <3> [515.287268] UBSAN: shift-out-of-bounds in ../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36 <3> [515.287271] shift exponent -1 is negative <4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary) <4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER <4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 1645 03/15/2024 <4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work [drm_display_helper] <4> [515.287303] Call Trace: <4> [515.287304] <TASK> <4> [515.287306] dump_stack_lvl+0xc1/0xf0 <4> [515.287313] dump_stack+0x10/0x20 <4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0 <4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0 <4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d [drm_display_helper] <4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe] <4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0 <4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60 <4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe] <4> [515.287740] ? find_held_lock+0x31/0x90 <4> [515.287747] ? lock_release+0xce/0x2a0 <4> [515.287754] drm_atomic_check_only+0x6a2/0xb40 <4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140 <4> [515.287765] drm_atomic_commit+0x6e/0xf0 <4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10 <4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0 <4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0 <4> [515.287795] ? mutex_lock_nested+0x1b/0x30 <4> [515.287801] drm_client_modeset_commit+0x26/0x50 <4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110 <4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140 <4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0 <4> [515.287819] drm_client_hotplug+0x6c/0xf0 <4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0 <4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30 <4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410 [drm_display_helper] <4> [515.287861] process_one_work+0x22b/0x6f0 <4> [515.287874] worker_thread+0x1e8/0x3d0 <4> [515.287879] ? __pfx_worker_thread+0x10/0x10 <4> [515.287882] kthread+0x11c/0x250 <4> [515.287886] ? __pfx_kthread+0x10/0x10 <4> [515.287890] ret_from_fork+0x2d7/0x310 <4> [515.287894] ? __pfx_kthread+0x10/0x10 <4> [515.287897] ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/ambient _ # cat /proc/$$/attr/smack/current _ # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms # echo foo >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms unknown option 86 # echo 4 >/smack/doi # echo 3 >/smack/doi !> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17 # echo 3 >/smack/doi !> [ 249.402261] smk_cipso_doi:678 remove rc = -2 !> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17 # ping -c1 10.1.95.12 !!> ping: 10.1.95.12: Address family for hostname not supported # echo _ >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms This happens because Smack keeps decommissioned DOIs, fails to re-add them, and consequently refuses to add the “default” domain map: # netlabelctl -p cipso list Configured CIPSO mappings (2) DOI value : 3 mapping type : PASS_THROUGH DOI value : 4 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (2) domain: "_" (IPv4) protocol: UNLABELED !> (no ipv4 map for default domain here) domain: DEFAULT (IPv6) protocol: UNLABELED Fix by clearing decommissioned DOI definitions and serializing concurrent DOI updates with a new lock. Also: - allow /smack/doi to live unconfigured, since adding a map (netlbl_cfg_cipsov4_map_add) may fail. CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI - add new DOI before removing the old default map, so the old map remains if the add fails (2008-02-04, Casey Schaufler)

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix race condition when checking rpm_on When autosuspend is triggered, driver rpm_on flag is set to indicate that a suspend/resume is already in progress. However, when a userspace application submits a command during this narrow window, amdxdna_pm_resume_get() may incorrectly skip the resume operation because the rpm_on flag is still set. This results in commands being submitted while the device has not actually resumed, causing unexpected behavior. The set_dpm() is called by suspend/resume, it relied on rpm_on flag to avoid calling into rpm suspend/resume recursivly. So to fix this, remove the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm() which explicitly resumes the device before invoking set_dpm(). With this change, set_dpm() is called directly inside the suspend or resume execution path. Otherwise, aie2_pm_set_dpm() is called.

In the Linux kernel, the following vulnerability has been resolved: bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst() bareudp_fill_metadata_dst() passes bareudp->sock to udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check. The socket is only created in bareudp_open() and NULLed in bareudp_stop(), so calling this function while the device is down triggers a NULL dereference via sock->sk. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160) Call Trace: <TASK> bareudp_fill_metadata_dst (drivers/net/bareudp.c:532) do_execute_actions (net/openvswitch/actions.c:901) ovs_execute_actions (net/openvswitch/actions.c:1589) ovs_packet_cmd_execute (net/openvswitch/datapath.c:700) genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1209) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths in the same driver.

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix NULL pointer dereference in class dump When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft() is called with new == NULL and stores NULL into q->qdiscs[cl - 1]. Subsequent RTM_GETTCLASS dump operations walk all classes via taprio_walk() and call taprio_dump_class(), which calls taprio_leaf() returning the NULL pointer, then dereferences it to read child->handle, causing a kernel NULL pointer dereference. The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user namespaces enabled, an unprivileged local user can trigger a kernel panic by creating a taprio qdisc inside a new network namespace, grafting an explicit child qdisc, deleting it, and requesting a class dump. The RTM_GETTCLASS dump itself requires no capability. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478) Call Trace: <TASK> tc_fill_tclass (net/sched/sch_api.c:1966) qdisc_class_dump (net/sched/sch_api.c:2326) taprio_walk (net/sched/sch_taprio.c:2514) tc_dump_tclass_qdisc (net/sched/sch_api.c:2352) tc_dump_tclass_root (net/sched/sch_api.c:2370) tc_dump_tclass (net/sched/sch_api.c:2431) rtnl_dumpit (net/core/rtnetlink.c:6864) netlink_dump (net/netlink/af_netlink.c:2325) rtnetlink_rcv_msg (net/core/rtnetlink.c:6959) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Fix this by substituting &noop_qdisc when new is NULL in taprio_graft(), a common pattern used by other qdiscs (e.g., multiq_graft()) to ensure the q->qdiscs[] slots are never NULL. This makes control-plane dump paths safe without requiring individual NULL checks. Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq) previously had explicit NULL guards that would drop/skip the packet cleanly, update those checks to test for &noop_qdisc instead. Without this, packets would reach taprio_enqueue_one() which increments the root qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc drops the packet but those counters are never rolled back, permanently inflating the root qdisc's statistics. After this change *old can be a valid qdisc, NULL, or &noop_qdisc. Only call qdisc_put(*old) in the first case to avoid decreasing noop_qdisc's refcount, which was never increased.

In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target IP address. This causes arptables rules to match against garbage data, leading to incorrect filtering decisions: packets that should be accepted may be dropped and vice versa. The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already handles this correctly by skipping the target hardware address for ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()." Mangle the original patch to always return 0 (no match) in case user matches on the target hardware address which is never present in IEEE1394. Note that this returns 0 (no match) for either normal and inverse match because matching in the target hardware address in ARPHRD_IEEE1394 has never been supported by arptables. This is intentional, matching on the target hardware address should never evaluate true for ARPHRD_IEEE1394. Moreover, adjust arpt_mangle to drop the packet too as AI suggests: In arpt_mangle, the logic assumes a standard ARP layout. Because IEEE1394 (FireWire) omits the target hardware address, the linear pointer arithmetic miscalculates the offset for the target IP address. This causes mangling operations to write to the wrong location, leading to packet corruption. To ensure safety, this patch drops packets (NF_DROP) when mangling is requested for these fields on IEEE1394 devices, as the current implementation cannot correctly map the FireWire ARP payload. This omits both mangling target hardware and IP address. Even if IP address mangling should be possible in IEEE1394, this would require to adjust arpt_mangle offset calculation, which has never been supported. Based on patch from Weiming Shi <bestswngs@gmail.com>.

In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packets. Make decode() and pull16() take the packet end pointer and return -1 when exhausted. Add a bounds check before the TCP-checksum read. The existing == -1 tests now do what they were always meant to.

In the Linux kernel, the following vulnerability has been resolved: slip: reject VJ receive packets on instances with no rstate array slhc_init() accepts rslots == 0 as a valid configuration, with the documented meaning of 'no receive compression'. In that case the allocation loop in slhc_init() is skipped, so comp->rstate stays NULL and comp->rslot_limit stays 0 (from the kzalloc of struct slcompress). The receive helpers do not defend against that configuration. slhc_uncompress() dereferences comp->rstate[x] when the VJ header carries an explicit connection ID, and slhc_remember() later assigns cs = &comp->rstate[...] after only comparing the packet's slot number to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the range check, and the code dereferences a NULL rstate. The configuration is reachable in-tree through PPP. PPPIOCSMAXCID stores its argument in a signed int, and (val >> 16) uses arithmetic shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1 is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because /dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path is reachable from an unprivileged user namespace. Once the malformed VJ state is installed, any inbound VJ-compressed or VJ-uncompressed frame that selects slot 0 crashes the kernel in softirq context: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519) Call Trace: <TASK> ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466) ppp_input (drivers/net/ppp/ppp_generic.c:2359) ppp_async_process (drivers/net/ppp/ppp_async.c:492) tasklet_action_common (kernel/softirq.c:926) handle_softirqs (kernel/softirq.c:623) run_ksoftirqd (kernel/softirq.c:1055) smpboot_thread_fn (kernel/smpboot.c:160) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) </TASK> Reject the receive side on such instances instead of touching rstate. slhc_uncompress() falls through to its existing 'bad' label, which bumps sls_i_error and enters the toss state. slhc_remember() mirrors that with an explicit sls_i_error increment followed by slhc_toss(); the sls_i_runt counter is not used here because a missing rstate is an internal configuration state, not a runt packet. The transmit path is unaffected: the only in-tree caller that picks rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and slip.c always calls slhc_init(16, 16), so comp->tstate remains valid and slhc_compress() continues to work.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that as "should not happen". Crash: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: <IRQ> nf_osf_match (net/netfilter/nfnetlink_osf.c:220) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:348) nf_hook_slow (net/netfilter/core.c:622) ip_local_deliver (net/ipv4/ip_input.c:265) ip_rcv (include/linux/skbuff.h:1162) __netif_receive_skb_one_core (net/core/dev.c:6181) process_backlog (net/core/dev.c:6642) __napi_poll (net/core/dev.c:7710) net_rx_action (net/core/dev.c:7945) handle_softirqs (kernel/softirq.c:622)

In the Linux kernel, the following vulnerability has been resolved: openvswitch: cap upcall PID array size and pre-size vport replies The vport netlink reply helpers allocate a fixed-size skb with nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID array via ovs_vport_get_upcall_portids(). Since ovs_vport_set_upcall_portids() accepts any non-zero multiple of sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID array large enough to overflow the reply buffer, causing nla_put() to fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with unprivileged user namespaces enabled (e.g., Ubuntu default), this is reachable via unshare -Urn since OVS vport mutation operations use GENL_UNS_ADMIN_PERM. kernel BUG at net/openvswitch/datapath.c:2414! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1 RIP: 0010:ovs_vport_cmd_set+0x34c/0x400 Call Trace: <TASK> genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116) genl_rcv_msg (net/netlink/genetlink.c:1194) netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject attempts to set more PIDs than nr_cpu_ids in ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply size in ovs_vport_cmd_msg_size() based on that bound, similar to the existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already used by the per-CPU dispatch configuration on the datapath side (ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the two sides stay consistent.

In the Linux kernel, the following vulnerability has been resolved: bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec() CO-RE accessor strings are colon-separated indices that describe a path from a root BTF type to a target field, e.g. "0:1:2" walks through nested struct members. bpf_core_parse_spec() parses each component with sscanf("%d"), so negative values like -1 are silently accepted. The subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the upper bound and always pass for negative values because C integer promotion converts the __u16 btf_vlen result to int, making the comparison (int)(-1) >= (int)(N) false for any positive N. When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff, producing an out-of-bounds read far past the members array. A crafted BPF program with a negative CO-RE accessor on any struct that exists in vmlinux BTF (e.g. task_struct) crashes the kernel deterministically during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y (default on major distributions). The bug is reachable with CAP_BPF: BUG: unable to handle page fault for address: ffffed11818b6626 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full) RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354) RAX: 00000000ffffffff Call Trace: <TASK> bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321) bpf_core_apply (kernel/bpf/btf.c:9507) check_core_relo (kernel/bpf/verifier.c:19475) bpf_check (kernel/bpf/verifier.c:26031) bpf_prog_load (kernel/bpf/syscall.c:3089) __sys_bpf (kernel/bpf/syscall.c:6228) </TASK> CO-RE accessor indices are inherently non-negative (struct member index, array element index, or enumerator index), so reject them immediately after parsing.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix end-of-list detection in cgroup_storage_get_next_key() list_next_entry() never returns NULL -- when the current element is the last entry it wraps to the list head via container_of(). The subsequent NULL check is therefore dead code and get_next_key() never returns -ENOENT for the last element, instead reading storage->key from a bogus pointer that aliases internal map fields and copying the result to userspace. Replace it with list_entry_is_head() so the function correctly returns -ENOENT when there are no more entries.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in arena_vm_close on fork arena_vm_open() only bumps vml->mmap_count but never registers the child VMA in arena->vma_list. The vml->vma always points at the parent VMA, so after parent munmap the pointer dangles. If the child then calls bpf_arena_free_pages(), zap_pages() reads the stale vml->vma triggering use-after-free. Fix this by preventing the arena VMA from being inherited across fork with VM_DONTCOPY, and preventing VMA splits via the may_split callback. Also reject mremap with a .mremap callback returning -EINVAL. A same-size mremap(MREMAP_FIXED) on the full arena VMA reaches copy_vma() through the following path: check_prep_vma() - returns 0 early: new_len == old_len skips VM_DONTEXPAND check prep_move_vma() - vm_start == old_addr and vm_end == old_addr + old_len so may_split is never called move_vma() copy_vma_and_data() copy_vma() vm_area_dup() - copies vm_private_data (vml pointer) vm_ops->open() - bumps vml->mmap_count vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA The refcount ensures the rollback's arena_vm_close does not free the vml shared with the original VMA.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_get_sndtimeo_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors.

In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path.

In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards.

In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ]

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Disallow re-exporting imported GEM objects Prevent re-exporting of imported GEM buffers by adding a custom prime_handle_to_fd callback that checks if the object is imported and returns -EOPNOTSUPP if so. Re-exporting imported GEM buffers causes loss of buffer flags settings, leading to incorrect device access and data corruption.

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked When red qdisc has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (red in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(red) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (red). And herein lies the problem. - red will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full) [ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq] [ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d [ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216 [ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048 [ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078 [ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000 [ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200 [ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000 [ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0 [ 78.671585][ T363] PKRU: 55555554 [ 78.671713][ T363] Call Trace: [ 78.671843][ T363] <TASK> [ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq] [ 78.672148][ T363] ? __pfx__printk+0x10/0x10 [ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0 [ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0 [ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red] [ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf] [ 78.673566][ T363] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as a loop bound over port_msg->data[] without checking that the message buffer contains sufficient data. A modem sending port_count=65535 in a 12-byte buffer triggers a slab-out-of-bounds read of up to 262140 bytes. Add a sizeof(*port_msg) check before accessing the port message header fields to guard against undersized messages. Add a struct_size() check after extracting port_count and before the loop. In t7xx_parse_host_rt_data(), guard the rt_feature header read with a remaining-buffer check before accessing data_len, validate feat_data_len against the actual remaining buffer to prevent OOB reads and signed integer overflow on offset. Pass msg_len from both call sites: skb->len at the DPMAIF path after skb_pull(), and the validated feat_data_len at the handshake path.

In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user().

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix handling of MAY_BACKLOG requests MAY_BACKLOG requests can return EBUSY. Handle them by checking for that value and filtering out EINPROGRESS notifications.

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl() Yiming reports an integer underflow in mpi_read_raw_from_sgl() when subtracting "lzeros" from the unsigned "nbytes". For this to happen, the scatterlist "sgl" needs to occupy more bytes than the "nbytes" parameter and the first "nbytes + 1" bytes of the scatterlist must be zero. Under these conditions, the while loop iterating over the scatterlist will count more zeroes than "nbytes", subtract the number of zeroes from "nbytes" and cause the underflow. When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally introduced the bug, it couldn't be triggered because all callers of mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to "nbytes". However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists"), the underflow can now actually be triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a larger "out_len" than "in_len" and filling the "in" buffer with zeroes, crypto_akcipher_sync_prep() will create an all-zero scatterlist used for both the "src" and "dst" member of struct akcipher_request and thereby fulfil the conditions to trigger the bug: sys_keyctl() keyctl_pkey_e_d_s() asymmetric_key_eds_op() software_key_eds_op() crypto_akcipher_sync_encrypt() crypto_akcipher_sync_prep() crypto_akcipher_encrypt() rsa_enc() mpi_read_raw_from_sgl() To the user this will be visible as a DoS as the kernel spins forever, causing soft lockup splats as a side effect. Fix it.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum server registration per node Current code does no bound checking on the number of servers added per node. A malicious client can flood NEW_SERVER messages and exhaust memory. Fix this issue by limiting the maximum number of server registrations to 256 per node. If the NEW_SERVER message is received for an old port, then don't restrict it as it will get replaced. While at it, also rate limit the error messages in the failure path of qrtr_ns_worker(). Note that the limit of 256 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.

In the Linux kernel, the following vulnerability has been resolved: ptrace: slightly saner 'get_dumpable()' logic The 'dumpability' of a task is fundamentally about the memory image of the task - the concept comes from whether it can core dump or not - and makes no sense when you don't have an associated mm. And almost all users do in fact use it only for the case where the task has a mm pointer. But we have one odd special case: ptrace_may_access() uses 'dumpable' to check various other things entirely independently of the MM (typically explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for threads that no longer have a VM (and maybe never did, like most kernel threads). It's not what this flag was designed for, but it is what it is. The ptrace code does check that the uid/gid matches, so you do have to be uid-0 to see kernel thread details, but this means that the traditional "drop capabilities" model doesn't make any difference for this all. Make it all make a *bit* more sense by saying that if you don't have a MM pointer, we'll use a cached "last dumpability" flag if the thread ever had a MM (it will be zero for kernel threads since it is never set), and require a proper CAP_SYS_PTRACE capability to override.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate inherited ACE SID length smb_inherit_dacl() walks the parent directory DACL loaded from the security descriptor xattr. It verifies that each ACE contains the fixed SID header before using it, but does not verify that the variable-length SID described by sid.num_subauth is fully contained in the ACE. A malformed inheritable ACE can advertise more subauthorities than are present in the ACE. compare_sids() may then read past the ACE. smb_set_ace() also clamps the copied destination SID, but used the unchecked source SID count to compute the inherited ACE size. That could advance the temporary inherited ACE buffer pointer and nt_size accounting past the allocated buffer. Fix this by validating the parent ACE SID count and SID length before using the SID during inheritance. Compute the inherited ACE size from the copied SID so the size matches the bounded destination SID. Reject the inherited DACL if size accumulation would overflow smb_acl.size or the security descriptor allocation size.

In the Linux kernel, the following vulnerability has been resolved: liveupdate: luo_file: remember retrieve() status LUO keeps track of successful retrieve attempts on a LUO file. It does so to avoid multiple retrievals of the same file. Multiple retrievals cause problems because once the file is retrieved, the serialized data structures are likely freed and the file is likely in a very different state from what the code expects. The retrieve boolean in struct luo_file keeps track of this, and is passed to the finish callback so it knows what work was already done and what it has left to do. All this works well when retrieve succeeds. When it fails, luo_retrieve_file() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. This results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace, but nothing prevents it from trying this again. The retry is problematic for much of the same reasons listed above. The file is likely in a very different state than what the retrieve logic normally expects, and it might even have freed some serialization data structures. Attempting to access them or free them again is going to break things. For example, if memfd managed to restore 8 of its 10 folios, but fails on the 9th, a subsequent retrieve attempt will try to call kho_restore_folio() on the first folio again, and that will fail with a warning since it is an invalid operation. Apart from the retry, finish() also breaks. Since on failure the retrieved bool in luo_file is never touched, the finish() call on session close will tell the file handler that retrieve was never attempted, and it will try to access or free the data structures that might not exist, much in the same way as the retry attempt. There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. Also pass this status code to finish() so it can make the right decision on the work it needs to do. This is done by changing the bool to an integer. A value of 0 means retrieve was never attempted, a positive value means it succeeded, and a negative value means it failed and the error code is the value.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC.

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Disable LPM on ST1000DM010-2EP102 According to a user report, the ST1000DM010-2EP102 has problems with LPM, causing random system freezes. The drive belongs to the same BarraCuda family as the ST2000DM008-2FR102 which has the same issue.

In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_access_flags() compared the gathered ptep_get() value against the requested entry to detect no-ops. ptep_get() ORs AF/dirty from all sub-PTEs in the CONT block, so a dirty sibling can make the target appear already-dirty. When the gathered value matches entry, the function returns 0 even though the target sub-PTE still has PTE_RDONLY set in hardware. For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered across the CONT range. But page-table walkers that evaluate each descriptor individually (e.g. a CPU without DBM support, or an SMMU without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the unchanged target sub-PTE, causing an infinite fault loop. Gathering can therefore cause false no-ops when only a sibling has been updated: - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared) - read faults: target still lacks PTE_AF Fix by checking each sub-PTE against the requested AF/dirty/write state (the same bits consumed by __ptep_set_access_flags()), using raw per-PTE values rather than the gathered ptep_get() view, before returning no-op. Keep using the raw target PTE for the write-bit unfold decision. Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT range may become the effective cached translation and software must maintain consistent attributes across the range.

In the Linux kernel, the following vulnerability has been resolved: nouveau/gsp: drop WARN_ON in ACPI probes These WARN_ONs seem to trigger a lot, and we don't seem to have a plan to fix them, so just drop them, as they are most likely harmless.

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid bitfield RMW for claim/retune flags Move claimed and retune control flags out of the bitfield word to avoid unrelated RMW side effects in asynchronous contexts. The host->claimed bit shared a word with retune flags. Writes to claimed in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite other bits when concurrent updates happen in other contexts, triggering spurious WARN_ON(!host->claimed). Convert claimed, can_retune, retune_now and retune_paused to bool to remove shared-word coupling.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated Explicitly set/clear CR8 write interception when AVIC is (de)activated to fix a bug where KVM leaves the interception enabled after AVIC is activated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8 will remain intercepted in perpetuity. On its own, the dangling CR8 intercept is "just" a performance issue, but combined with the TPR sync bug fixed by commit d02e48830e3f ("KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the danging intercept is fatal to Windows guests as the TPR seen by hardware gets wildly out of sync with reality. Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignored when Virtual Interrupt Delivery is enabled, i.e. when APICv is active in KVM's world. I.e. there's no need to trigger update_cr8_intercept(), this is firmly an SVM implementation flaw/detail. WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM should never enter the guest with AVIC enabled and CR8 writes intercepted. [Squash fix to avic_deactivate_vmcb. - Paolo]

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Disable preemption between scx_claim_exit() and kicking helper work scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from triggering further error handling. After claiming exit, the caller must kick the helper kthread work which initiates bypass mode and teardown. If the calling task gets preempted between claiming exit and kicking the helper work, and the BPF scheduler fails to schedule it back (since error handling is now disabled), the helper work is never queued, bypass mode never activates, tasks stop being dispatched, and the system wedges. Disable preemption across scx_claim_exit() and the subsequent work kicking in all callers - scx_disable() and scx_vexit(). Add lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the requirement.

In the Linux kernel, the following vulnerability has been resolved: net-shapers: don't free reply skb after genlmsg_reply() genlmsg_reply() hands the reply skb to netlink, and netlink_unicast() consumes it on all return paths, whether the skb is queued successfully or freed on an error path. net_shaper_nl_get_doit() and net_shaper_nl_cap_get_doit() currently jump to free_msg after genlmsg_reply() fails and call nlmsg_free(msg), which can hit the same skb twice. Return the genlmsg_reply() error directly and keep free_msg only for pre-reply failures.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition The acp3x_5682_init() function did not check the return value of clk_get(), which could lead to dereferencing error pointers in rt5682_clk_enable(). Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding proper IS_ERR() checks for both clock acquisitions.

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt1011: Use component to get the dapm context in spk_mode_put The correct helper to use in rt1011_recv_spk_mode_put() to retrieve the DAPM context is snd_soc_component_to_dapm(), from kcontrol we will receive NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE before enabling TRANS_DDI_FUNC_CTL. Personally I was only able to reproduce a hang (on an Dell XPS 7390 2-in-1) with an external display connected via a dock using a dodgy type-C cable that made the link training fail. After the failed link training the machine would hang. TGL seemed immune to the problem for whatever reason. BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL as well. The DMC firmware also does the VRR restore in two stages: - first stage seems to be unconditional and includes TRANS_VRR_CTL and a few other VRR registers, among other things - second stage is conditional on the DDI being enabled, and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE, among other things So let's reorder the steps to match to avoid the hang, and toss in an extra WARN to make sure we don't screw this up later. BSpec: 22243 (cherry picked from commit 93f3a267c3dd4d811b224bb9e179a10d81456a74)

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas() sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead of the intended __be32 element size (4 bytes). Use sizeof(*meas) to correctly match the buffer element type.