Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: net: netpoll: Initialize UDP checksum field before checksumming commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed the initialization of the UDP checksum, which was wrong and broke netpoll IPv6 transmission due to bad checksumming. udph->check needs to be set before calling csum_ipv6_magic().

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix regression with native SMB symlinks Some users and customers reported that their backup/copy tools started to fail when the directory being copied contained symlink targets that the client couldn't parse - even when those symlinks weren't followed. Fix this by allowing lstat(2) and readlink(2) to succeed even when the client can't resolve the symlink target, restoring old behavior.

In the Linux kernel, the following vulnerability has been resolved: riscv: vector: Fix context save/restore with xtheadvector Previously only v0-v7 were correctly saved/restored, and the context of v8-v31 are damanged. Correctly save/restore v8-v31 to avoid breaking userspace.

In the Linux kernel, the following vulnerability has been resolved: Revert "riscv: Define TASK_SIZE_MAX for __access_ok()" This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for __access_ok()"). This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(), because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some computation. The reasoning was that all user addresses are less than LONG_MAX, and all kernel addresses are greater than LONG_MAX. Therefore access_ok() can filter kernel addresses. Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but access_ok() let them pass. That was thought to be okay, because they are not valid addresses at hardware level. Unfortunately, one case is missed: get_user_pages_fast() happily accepts addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses get_user_pages_fast(). This causes the problem reported by Robert [1]. Therefore, revert this commit. TASK_SIZE_MAX is changed to the default: TASK_SIZE. This unfortunately reduces performance, because TASK_SIZE is more expensive to compute compared to LONG_MAX. But correctness first, we can think about optimization later, if required.

In the Linux kernel, the following vulnerability has been resolved: riscv: fix runtime constant support for nommu kernels the `__runtime_fixup_32` function does not handle the case where `val` is zero correctly (as might occur when patching a nommu kernel and referring to a physical address below the 4GiB boundary whose upper 32 bits are all zero) because nothing in the existing logic prevents the code from taking the `else` branch of both nop-checks and emitting two `nop` instructions. This leaves random garbage in the register that is supposed to receive the upper 32 bits of the pointer instead of zero that when combined with the value for the lower 32 bits yields an invalid pointer and causes a kernel panic when that pointer is eventually accessed. The author clearly considered the fact that if the `lui` is converted into a `nop` that the second instruction needs to be adjusted to become an `li` instead of an `addi`, hence introducing the `addi_insn_mask` variable, but didn't follow that logic through fully to the case where the `else` branch executes. To fix it just adjust the logic to ensure that the second `else` branch is not taken if the first instruction will be patched to a `nop`.

In the Linux kernel, the following vulnerability has been resolved: nfsd: nfsd4_spo_must_allow() must check this is a v4 compound request If the request being processed is not a v4 compound request, then examining the cstate can have undefined results. This patch adds a check that the rpc procedure being executed (rq_procinfo) is the NFSPROC4_COMPOUND procedure.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add basic validation for RAS header If RAS header read from EEPROM is corrupted, it could result in trying to allocate huge memory for reading the records. Add some validation to header fields.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix sample vs do_exit() Baisheng Gao reported an ARM64 crash, which Mark decoded as being a synchronous external abort -- most likely due to trying to access MMIO in bad ways. The crash further shows perf trying to do a user stack sample while in exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address space it is trying to access. It turns out that we stop perf after we tear down the userspace mm; a receipie for disaster, since perf likes to access userspace for various reasons. Flip this order by moving up where we stop perf in do_exit(). Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER to abort when the current task does not have an mm (exit_mm() makes sure to set current->mm = NULL; before commencing with the actual teardown). Such that CPU wide events don't trip on this same problem.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Update read pointer only after buffer is written Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated before the buffer is written, potentially causing race conditions where the host sees an updated read pointer before the buffer is actually written. Updating rd_offset prematurely can lead to the host accessing an uninitialized or incomplete element, resulting in data corruption. Invoke the buffer write before updating rd_offset to ensure the element is fully written before signaling its availability.

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - check record size in ims_pcu_flash_firmware() The "len" variable comes from the firmware and we generally do trust firmware, but it's always better to double check. If the "len" is too large it could result in memory corruption when we do "memcpy(fragment->data, rec->data, len);"

In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb

In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: check msg length in SMBUS block read For SMBUS block read, do not continue to read if the message length passed from the device is '0' or greater than the maximum allowed bytes.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: do not ping device which has failed to load firmware Syzkaller reports [1, 2] crashes caused by an attempts to ping the device which has failed to load firmware. Since such a device doesn't pass 'ieee80211_register_hw()', an internal workqueue managed by 'ieee80211_queue_work()' is not yet created and an attempt to queue work on it causes null-ptr-deref. [1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff [2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850 GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach() When rproc->state = RPROC_DETACHED and rproc_attach() is used to attach to the remote processor, if rproc_handle_resources() returns a failure, the resources allocated by imx_rproc_prepare() should be released, otherwise the following memory leak will occur. Since almost the same thing is done in imx_rproc_prepare() and rproc_resource_cleanup(), Function rproc_resource_cleanup() is able to deal with empty lists so it is better to fix the "goto" statements in rproc_attach(). replace the "unprepare_device" goto statement with "clean_up_resources" and get rid of the "unprepare_device" label. unreferenced object 0xffff0000861c5d00 (size 128): comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............ backtrace: [<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c [<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0 [<00000000521c0345>] kmalloc_trace+0x40/0x158 [<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8 [<000000002815755e>] imx_rproc_prepare+0xe0/0x180 [<0000000003f61b4e>] rproc_boot+0x2ec/0x528 [<00000000e7e994ac>] rproc_add+0x124/0x17c [<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4 [<00000000efc298a1>] platform_probe+0x68/0xd8 [<00000000110be6fe>] really_probe+0x110/0x27c [<00000000e245c0ae>] __driver_probe_device+0x78/0x12c [<00000000f61f6f5e>] driver_probe_device+0x3c/0x118 [<00000000a7874938>] __device_attach_driver+0xb8/0xf8 [<0000000065319e69>] bus_for_each_drv+0x84/0xe4 [<00000000db3eb243>] __device_attach+0xfc/0x18c [<0000000072e4e1a4>] device_initial_probe+0x14/0x20

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Release rproc->clean_table after rproc_attach() fails When rproc->state = RPROC_DETACHED is attached to remote processor through rproc_attach(), if rproc_handle_resources() returns failure, then the clean table should be released, otherwise the following memory leak will occur. unreferenced object 0xffff000086a99800 (size 1024): comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s) hex dump (first 32 bytes): 00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............ 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............ backtrace: [<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc [<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230 [<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260 [<0000000037818dae>] kmemdup+0x34/0x60 [<00000000610f7f57>] rproc_boot+0x35c/0x56c [<0000000065f8871a>] rproc_add+0x124/0x17c [<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4 [<000000003bcaa37d>] platform_probe+0x68/0xd8 [<00000000771577f9>] really_probe+0x110/0x27c [<00000000531fea59>] __driver_probe_device+0x78/0x12c [<0000000080036a04>] driver_probe_device+0x3c/0x118 [<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8 [<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4 [<000000001a53b53e>] __device_attach+0xfc/0x18c [<00000000d1a2a32c>] device_initial_probe+0x14/0x20 [<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4 unreferenced object 0xffff0000864c9690 (size 16):

In the Linux kernel, the following vulnerability has been resolved: ice: fix eswitch code memory leak in reset scenario Add simple eswitch mode checker in attaching VF procedure and allocate required port representor memory structures only in switchdev mode. The reset flows triggers VF (if present) detach/attach procedure. It might involve VF port representor(s) re-creation if the device is configured is switchdev mode (not legacy one). The memory was blindly allocated in current implementation, regardless of the mode and not freed if in legacy mode. Kmemeleak trace: unreferenced object (percpu) 0x7e3bce5b888458 (size 40): comm "bash", pid 1784, jiffies 4295743894 hex dump (first 32 bytes on cpu 45): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): pcpu_alloc_noprof+0x4c4/0x7c0 ice_repr_create+0x66/0x130 [ice] ice_repr_create_vf+0x22/0x70 [ice] ice_eswitch_attach_vf+0x1b/0xa0 [ice] ice_reset_all_vfs+0x1dd/0x2f0 [ice] ice_pci_err_resume+0x3b/0xb0 [ice] pci_reset_function+0x8f/0x120 reset_store+0x56/0xa0 kernfs_fop_write_iter+0x120/0x1b0 vfs_write+0x31c/0x430 ksys_write+0x61/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Testing hints (ethX is PF netdev): - create at least one VF echo 1 > /sys/class/net/ethX/device/sriov_numvfs - trigger the reset echo 1 > /sys/class/net/ethX/device/reset

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: uart: Set tty->disc_data only in success path Setting tty->disc_data before opening the NCI device means we need to clean it up on error paths. This also opens some short window if device starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded (broken hardware?). Close the window by exposing tty->disc_data only on the success path, when opening of the NCI device and try_module_get() succeeds. The code differs in error path in one aspect: tty->disc_data won't be ever assigned thus NULL-ified. This however should not be relevant difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check return result of sb_min_blocksize Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug. Syzkaller forks multiple processes which after mounting the Squashfs filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000). Now if this ioctl occurs at the same time another process is in the process of mounting a Squashfs filesystem on /dev/loop0, the failure occurs. When this happens the following code in squashfs_fill_super() fails. ---- msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE); msblk->devblksize_log2 = ffz(~msblk->devblksize); ---- sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0. As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2 is set to 64. This subsequently causes the UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') This commit adds a check for a 0 return by sb_min_blocksize().

In the Linux kernel, the following vulnerability has been resolved: virtio-net: xsk: rx: fix the frame's length check When calling buf_to_xdp, the len argument is the frame data's length without virtio header's length (vi->hdr_len). We check that len with xsk_pool_get_rx_frame_size() + vi->hdr_len to ensure the provided len does not larger than the allocated chunk size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk, we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost to start placing data from hard_start + XDP_PACKET_HEADROOM - vi->hdr_len not hard_start + XDP_PACKET_HEADROOM But the first buffer has virtio_header, so the maximum frame's length in the first buffer can only be xsk_pool_get_rx_frame_size() not xsk_pool_get_rx_frame_size() + vi->hdr_len like in the current check. This commit adds an additional argument to buf_to_xdp differentiate between the first buffer and other ones to correctly calculate the maximum frame's length.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix double put of request If a netfs request finishes during the pause loop, it will have the ref that belongs to the IN_PROGRESS flag removed at that point - however, if it then goes to the final wait loop, that will *also* put the ref because it sees that the IN_PROGRESS flag is clear and incorrectly assumes that this happened when it called the collector. In fact, since IN_PROGRESS is clear, we shouldn't call the collector again since it's done all the cleanup, such as calling ->ki_complete(). Fix this by making netfs_collect_in_app() just return, indicating that we're done if IN_PROGRESS is removed.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix a fence leak in submit error path In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Patchwork: https://patchwork.freedesktop.org/patch/653584/

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix another leak in the submit error path put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Patchwork: https://patchwork.freedesktop.org/patch/653583/

In the Linux kernel, the following vulnerability has been resolved: genirq/irq_sim: Initialize work context pointers properly Initialize `ops` member's pointers properly by using kzalloc() instead of kmalloc() when allocating the simulation work context. Otherwise the pointers contain random content leading to invalid dereferencing.

In the Linux kernel, the following vulnerability has been resolved: riscv: cpu_ops_sbi: Use static array for boot_data Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: remove WARN on bad firmware input If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak of bio integrity If nvmet receives commands with metadata there is a continuous memory leak of kmalloc-128 slab or more precisely bio->bi_integrity. Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio") each user of bio_init has to use bio_uninit as well. Otherwise the bio integrity is not getting free. Nvmet uses bio_init for inline bios. Uninit the inline bio to complete deallocation of integrity in bio.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: displayport: Fix potential deadlock The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context.

In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: Clear the vmci transport packet properly when initializing it In vmci_transport_packet_init memset the vmci_transport_packet before populating the fields to avoid any uninitialised data being left in the structure.

In the Linux kernel, the following vulnerability has been resolved: idpf: return 0 size for RSS key if not supported Returning -EOPNOTSUPP from function returning u32 is leading to cast and invalid size value as a result. -EOPNOTSUPP as a size probably will lead to allocation fail. Command: ethtool -x eth0 It is visible on all devices that don't have RSS caps set. [ 136.615917] Call Trace: [ 136.615921] <TASK> [ 136.615927] ? __warn+0x89/0x130 [ 136.615942] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.615953] ? report_bug+0x164/0x190 [ 136.615968] ? handle_bug+0x58/0x90 [ 136.615979] ? exc_invalid_op+0x17/0x70 [ 136.615987] ? asm_exc_invalid_op+0x1a/0x20 [ 136.616001] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616016] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.616028] __alloc_pages_noprof+0xe/0x20 [ 136.616038] ___kmalloc_large_node+0x80/0x110 [ 136.616072] __kmalloc_large_node_noprof+0x1d/0xa0 [ 136.616081] __kmalloc_noprof+0x32c/0x4c0 [ 136.616098] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616105] rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616114] ethnl_default_doit+0x107/0x3d0 [ 136.616131] genl_family_rcv_msg_doit+0x100/0x160 [ 136.616147] genl_rcv_msg+0x1b8/0x2c0 [ 136.616156] ? __pfx_ethnl_default_doit+0x10/0x10 [ 136.616168] ? __pfx_genl_rcv_msg+0x10/0x10 [ 136.616176] netlink_rcv_skb+0x58/0x110 [ 136.616186] genl_rcv+0x28/0x40 [ 136.616195] netlink_unicast+0x19b/0x290 [ 136.616206] netlink_sendmsg+0x222/0x490 [ 136.616215] __sys_sendto+0x1fd/0x210 [ 136.616233] __x64_sys_sendto+0x24/0x30 [ 136.616242] do_syscall_64+0x82/0x160 [ 136.616252] ? __sys_recvmsg+0x83/0xe0 [ 136.616265] ? syscall_exit_to_user_mode+0x10/0x210 [ 136.616275] ? do_syscall_64+0x8e/0x160 [ 136.616282] ? __count_memcg_events+0xa1/0x130 [ 136.616295] ? count_memcg_events.constprop.0+0x1a/0x30 [ 136.616306] ? handle_mm_fault+0xae/0x2d0 [ 136.616319] ? do_user_addr_fault+0x379/0x670 [ 136.616328] ? clear_bhb_loop+0x45/0xa0 [ 136.616340] ? clear_bhb_loop+0x45/0xa0 [ 136.616349] ? clear_bhb_loop+0x45/0xa0 [ 136.616359] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 136.616369] RIP: 0033:0x7fd30ba7b047 [ 136.616376] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d bd d5 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44 [ 136.616381] RSP: 002b:00007ffde1796d68 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 136.616388] RAX: ffffffffffffffda RBX: 000055d7bd89f2a0 RCX: 00007fd30ba7b047 [ 136.616392] RDX: 0000000000000028 RSI: 000055d7bd89f3b0 RDI: 0000000000000003 [ 136.616396] RBP: 00007ffde1796e10 R08: 00007fd30bb4e200 R09: 000000000000000c [ 136.616399] R10: 0000000000000000 R11: 0000000000000202 R12: 000055d7bd89f340 [ 136.616403] R13: 000055d7bd89f3b0 R14: 000055d78943f200 R15: 0000000000000000

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port() The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item()

In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: reallocate BAM transactions Using the mtd_nandbiterrs module for testing the driver occasionally results in weird things like below. 1. swiotlb mapping fails with the following message: [ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots) [ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc [ 87.999314] qcom_snand 79b0000.spi: failure to write raw page [ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110) Rebooting the board after this causes a panic due to a NULL pointer dereference. 2. If the swiotlb mapping does not fail, rebooting the board may result in a different panic due to a bad spinlock magic: [ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241 [ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b ... Investigating the issue revealed that these symptoms are results of memory corruption which is caused by out of bounds access within the driver. The driver uses a dynamically allocated structure for BAM transactions, which structure must have enough space for all possible variations of different flash operations initiated by the driver. The required space heavily depends on the actual number of 'codewords' which is calculated from the pagesize of the actual NAND chip. Although the qcom_nandc_alloc() function allocates memory for the BAM transactions during probe, but since the actual number of 'codewords' is not yet know the allocation is done for one 'codeword' only. Because of this, whenever the driver does a flash operation, and the number of the required transactions exceeds the size of the allocated arrays the driver accesses memory out of the allocated range. To avoid this, change the code to free the initially allocated BAM transactions memory, and allocate a new one once the actual number of 'codewords' required for a given NAND chip is known.

In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix suspicious RCU usage warning When I run the NVME over TCP test in virtme-ng, I get the following "suspicious RCU usage" warning in nvme_mpath_add_sysfs_link(): ''' [ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77. [ 5.027401][ T183] nvme nvme0: creating 2 I/O queues. [ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues. [ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77 [ 5.042214][ T25] [ 5.042440][ T25] ============================= [ 5.042579][ T25] WARNING: suspicious RCU usage [ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted [ 5.042812][ T25] ----------------------------- [ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!! [ 5.043111][ T25] [ 5.043111][ T25] other info that might help us debug this: [ 5.043111][ T25] [ 5.043341][ T25] [ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1 [ 5.043502][ T25] 3 locks held by kworker/u9:0/25: [ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350 [ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350 [ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0 [ 5.044300][ T25] [ 5.044300][ T25] stack backtrace: [ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full) [ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044442][ T25] Workqueue: async async_run_entry_fn [ 5.044445][ T25] Call Trace: [ 5.044446][ T25] <TASK> [ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0 [ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0 [ 5.044459][ T25] ? queue_work_on+0x90/0xf0 [ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110 [ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0 [ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0 [ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10 [ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580 [ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0 [ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240 [ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10 [ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10 [ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0 [ 5.044498][ T25] ? validate_chain+0x232/0x4f0 [ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810 [ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10 [ 5.044508][ T25] ? find_held_lock+0x2b/0x80 [ 5.044512][ T25] ? ktime_get+0x16d/0x220 [ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30 [ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10 [ 5.044522][ T25] async_run_entry_fn+0x97/0x560 [ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044526][ T25] process_one_work+0xd3c/0x1350 [ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10 [ 5.044536][ T25] ? assign_work+0x16c/0x240 [ 5.044539][ T25] worker_thread+0x4da/0xd50 [ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10 [ 5.044546][ T25] kthread+0x356/0x5c0 [ 5.044548][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180 [ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044557][ T25] ? __pfx_kthread+0x10/0x10 [ 5.04 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails. syzbot reported a warning below [1] following a fault injection in nfs_fs_proc_net_init(). [0] When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed. Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning is logged as the directory is not empty. Let's handle the error of nfs_fs_proc_net_init() properly. [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174) should_failslab (mm/failslab.c:46) kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204) __proc_create (fs/proc/generic.c:427) proc_create_reg (fs/proc/generic.c:554) proc_create_net_data (fs/proc/proc_net.c:120) nfs_fs_proc_net_init (fs/nfs/client.c:1409) nfs_net_init (fs/nfs/inode.c:2600) ops_init (net/core/net_namespace.c:138) setup_net (net/core/net_namespace.c:443) copy_net_ns (net/core/net_namespace.c:576) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4)) ksys_unshare (kernel/fork.c:3123) __x64_sys_unshare (kernel/fork.c:3190) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> [1]: remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs' WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Modules linked in: CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00 RSP: 0018:ffffc90003637b08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8 RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001 RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00 R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000 FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76 ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253 setup_net+0x2e1/0x510 net/core/net_namespace.c:457 copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574 create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218 ksys_unshare+0x45b/0xa40 kernel/fork.c:3121 __do_sys_unshare kernel/fork.c:3192 [inline] __se_sys_unshare kernel/fork.c:3190 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3190 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa1a6b8e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create anonymous inodes with proper security context. This replaces the current pattern of calling alloc_anon_inode() followed by inode_init_security_anon() for creating security context manually. This change also fixes a security regression in secretmem where the S_PRIVATE flag was not cleared after alloc_anon_inode(), causing LSM/SELinux checks to be bypassed for secretmem file descriptors. As guest_memfd currently resides in the KVM module, we need to export this symbol for use outside the core kernel. In the future, guest_memfd might be moved to core-mm, at which point the symbols no longer would have to be exported. When/if that happens is still unclear.

In the Linux kernel, the following vulnerability has been resolved: regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable.

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier.

In the Linux kernel, the following vulnerability has been resolved: idpf: convert control queue mutex to a spinlock With VIRTCHNL2_CAP_MACFILTER enabled, the following warning is generated on module load: [ 324.701677] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578 [ 324.701684] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1582, name: NetworkManager [ 324.701689] preempt_count: 201, expected: 0 [ 324.701693] RCU nest depth: 0, expected: 0 [ 324.701697] 2 locks held by NetworkManager/1582: [ 324.701702] #0: ffffffff9f7be770 (rtnl_mutex){....}-{3:3}, at: rtnl_newlink+0x791/0x21e0 [ 324.701730] #1: ff1100216c380368 (_xmit_ETHER){....}-{2:2}, at: __dev_open+0x3f0/0x870 [ 324.701749] Preemption disabled at: [ 324.701752] [<ffffffff9cd23b9d>] __dev_open+0x3dd/0x870 [ 324.701765] CPU: 30 UID: 0 PID: 1582 Comm: NetworkManager Not tainted 6.15.0-rc5+ #2 PREEMPT(voluntary) [ 324.701771] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022 [ 324.701774] Call Trace: [ 324.701777] <TASK> [ 324.701779] dump_stack_lvl+0x5d/0x80 [ 324.701788] ? __dev_open+0x3dd/0x870 [ 324.701793] __might_resched.cold+0x1ef/0x23d <..> [ 324.701818] __mutex_lock+0x113/0x1b80 <..> [ 324.701917] idpf_ctlq_clean_sq+0xad/0x4b0 [idpf] [ 324.701935] ? kasan_save_track+0x14/0x30 [ 324.701941] idpf_mb_clean+0x143/0x380 [idpf] <..> [ 324.701991] idpf_send_mb_msg+0x111/0x720 [idpf] [ 324.702009] idpf_vc_xn_exec+0x4cc/0x990 [idpf] [ 324.702021] ? rcu_is_watching+0x12/0xc0 [ 324.702035] idpf_add_del_mac_filters+0x3ed/0xb50 [idpf] <..> [ 324.702122] __hw_addr_sync_dev+0x1cf/0x300 [ 324.702126] ? find_held_lock+0x32/0x90 [ 324.702134] idpf_set_rx_mode+0x317/0x390 [idpf] [ 324.702152] __dev_open+0x3f8/0x870 [ 324.702159] ? __pfx___dev_open+0x10/0x10 [ 324.702174] __dev_change_flags+0x443/0x650 <..> [ 324.702208] netif_change_flags+0x80/0x160 [ 324.702218] do_setlink.isra.0+0x16a0/0x3960 <..> [ 324.702349] rtnl_newlink+0x12fd/0x21e0 The sequence is as follows: rtnl_newlink()-> __dev_change_flags()-> __dev_open()-> dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock" idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON __dev_uc_sync() -> idpf_add_mac_filter -> idpf_add_del_mac_filters -> idpf_send_mb_msg() -> idpf_mb_clean() -> idpf_ctlq_clean_sq() # mutex_lock(cq_lock) Fix by converting cq_lock to a spinlock. All operations under the new lock are safe except freeing the DMA memory, which may use vunmap(). Fix by requesting a contiguous physical memory for the DMA mapping.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix timeline left held on VMA alloc error The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f)

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix memory corruption of input_handler_list In appletb_kbd_probe an input handler is initialised and then registered with input core through input_register_handler(). When this happens input core will add the input handler (specifically its node) to the global input_handler_list. The input_handler_list is central to the functionality of input core and is traversed in various places in input core. An example of this is when a new input device is plugged in and gets registered with input core. The input_handler in probe is allocated as device managed memory. If a probe failure occurs after input_register_handler() the input_handler memory is freed, yet it will remain in the input_handler_list. This effectively means the input_handler_list contains a dangling pointer to data belonging to a freed input handler. This causes an issue when any other input device is plugged in - in my case I had an old PixArt HP USB optical mouse and I decided to plug it in after a failure occurred after input_register_handler(). This lead to the registration of this input device via input_register_device which involves traversing over every handler in the corrupted input_handler_list and calling input_attach_handler(), giving each handler a chance to bind to newly registered device. The core of this bug is a UAF which causes memory corruption of input_handler_list and to fix it we must ensure the input handler is unregistered from input core, this is done through input_unregister_handler(). [ 63.191597] ================================================================== [ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54 [ 63.192094] [ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d [ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164 [ 63.192094] Workqueue: usb_hub_wq hub_event [ 63.192094] Call Trace: [ 63.192094] <TASK> [ 63.192094] dump_stack_lvl+0x53/0x70 [ 63.192094] print_report+0xce/0x670 [ 63.192094] kasan_report+0xce/0x100 [ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] input_register_device+0x76c/0xd00 [ 63.192094] hidinput_connect+0x686d/0xad60 [ 63.192094] hid_connect+0xf20/0x1b10 [ 63.192094] hid_hw_start+0x83/0x100 [ 63.192094] hid_device_probe+0x2d1/0x680 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] hid_add_device+0x30b/0x910 [ 63.192094] usbhid_probe+0x920/0xe00 [ 63.192094] usb_probe_interface+0x363/0x9a0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_set_configuration+0xd14/0x1880 [ 63.192094] usb_generic_driver_probe+0x78/0xb0 [ 63.192094] usb_probe_device+0xaa/0x2e0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_new_device+0x7b4/0x1000 [ 63.192094] hub_event+0x234d/0x3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: do not index invalid pin_assignments A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix memory leak by freeing notifier callback node Commit e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") adds support for notifier callbacks by allocating and inserting a callback node into a hashtable during registration of notifiers. However, during unregistration, the code only removes the node from the hashtable without freeing the associated memory, resulting in a memory leak. Resolve the memory leak issue by ensuring the allocated notifier callback node is properly freed after it is removed from the hashtable entry.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context The current use of a mutex to protect the notifier hashtable accesses can lead to issues in the atomic context. It results in the below kernel warnings: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4 | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | handle_notif_callbacks+0x54/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 To address this, replace the mutex with an rwlock to protect the notifier hashtable accesses. This ensures that read-side locking does not sleep and multiple readers can acquire the lock concurrently, avoiding unnecessary contention and potential deadlocks. Writer access remains exclusive, preserving correctness. This change resolves warnings from lockdep about potential sleep in atomic context.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert The obj_event may be loaded immediately after inserted, then if the list_head is not initialized then we may get a poisonous pointer. This fixes the crash below: mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced) mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056 mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0 mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000 [0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E) [last unloaded: mst_pci] CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1 Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023 pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--) pc : dispatch_event_fd+0x68/0x300 [mlx5_ib] lr : devx_event_notifier+0xcc/0x228 [mlx5_ib] sp : ffff80001005bcf0 x29: ffff80001005bcf0 x28: 0000000000000001 x27: ffff244e0740a1d8 x26: ffff244e0740a1d0 x25: ffffda56beff5ae0 x24: ffffda56bf911618 x23: ffff244e0596a480 x22: ffff244e0596a480 x21: ffff244d8312ad90 x20: ffff244e0596a480 x19: fffffffffffffff0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda56be66d620 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000040 x10: ffffda56bfcafb50 x9 : ffffda5655c25f2c x8 : 0000000000000010 x7 : 0000000000000000 x6 : ffff24545a2e24b8 x5 : 0000000000000003 x4 : ffff80001005bd28 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff244e0596a480 x0 : ffff244d8312ad90 Call trace: dispatch_event_fd+0x68/0x300 [mlx5_ib] devx_event_notifier+0xcc/0x228 [mlx5_ib] atomic_notifier_call_chain+0x58/0x80 mlx5_eq_async_int+0x148/0x2b0 [mlx5_core] atomic_notifier_call_chain+0x58/0x80 irq_int_handler+0x20/0x30 [mlx5_core] __handle_irq_event_percpu+0x60/0x220 handle_irq_event_percpu+0x3c/0x90 handle_irq_event+0x58/0x158 handle_fasteoi_irq+0xfc/0x188 generic_handle_irq+0x34/0x48 ...

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0