Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: highmem: fix checks in __kmap_local_sched_{in,out} When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix mpol_new leak in shared_policy_replace If mpol_new is allocated but not used in restart loop, mpol_new will be freed via mpol_put before returning to the caller. But refcnt is not initialized yet, so mpol_put could not do the right things and might leak the unused mpol_new. This would happen if mempolicy was updated on the shared shmem file while the sp->lock has been dropped during the memory allocation. This issue could be triggered easily with the below code snippet if there are many processes doing the below work at the same time: shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT); shm = shmat(shmid, 0, 0); loop many times { mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0); mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask, maxnode, 0); }

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone btrfs_can_activate_zone() can be called with the device_list_mutex already held, which will lead to a deadlock: insert_dev_extents() // Takes device_list_mutex `-> insert_dev_extent() `-> btrfs_insert_empty_item() `-> btrfs_insert_empty_items() `-> btrfs_search_slot() `-> btrfs_cow_block() `-> __btrfs_cow_block() `-> btrfs_alloc_tree_block() `-> btrfs_reserve_extent() `-> find_free_extent() `-> find_free_extent_update_loop() `-> can_allocate_chunk() `-> btrfs_can_activate_zone() // Takes device_list_mutex again Instead of using the RCU on fs_devices->device_list we can use fs_devices->alloc_list, protected by the chunk_mutex to traverse the list of active devices. We are in the chunk allocation thread. The newer chunk allocation happens from the devices in the fs_device->alloc_list protected by the chunk_mutex. btrfs_create_chunk() lockdep_assert_held(&info->chunk_mutex); gather_device_info list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) Also, a device that reappears after the mount won't join the alloc_list yet and, it will be in the dev_list, which we don't want to consider in the context of the chunk alloc. [15.166572] WARNING: possible recursive locking detected [15.167117] 5.17.0-rc6-dennis #79 Not tainted [15.167487] -------------------------------------------- [15.167733] kworker/u8:3/146 is trying to acquire lock: [15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: find_free_extent+0x15a/0x14f0 [btrfs] [15.167733] [15.167733] but task is already holding lock: [15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs] [15.167733] [15.167733] other info that might help us debug this: [15.167733] Possible unsafe locking scenario: [15.167733] [15.171834] CPU0 [15.171834] ---- [15.171834] lock(&fs_devs->device_list_mutex); [15.171834] lock(&fs_devs->device_list_mutex); [15.171834] [15.171834] *** DEADLOCK *** [15.171834] [15.171834] May be due to missing lock nesting notation [15.171834] [15.171834] 5 locks held by kworker/u8:3/146: [15.171834] #0: ffff888100050938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0 [15.171834] #1: ffffc9000067be80 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0 [15.176244] #2: ffff88810521e620 (sb_internal){.+.+}-{0:0}, at: flush_space+0x335/0x600 [btrfs] [15.176244] #3: ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs] [15.176244] #4: ffff8881152e4b78 (btrfs-dev-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x130 [btrfs] [15.179641] [15.179641] stack backtrace: [15.179641] CPU: 1 PID: 146 Comm: kworker/u8:3 Not tainted 5.17.0-rc6-dennis #79 [15.179641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [15.179641] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [15.179641] Call Trace: [15.179641] <TASK> [15.179641] dump_stack_lvl+0x45/0x59 [15.179641] __lock_acquire.cold+0x217/0x2b2 [15.179641] lock_acquire+0xbf/0x2b0 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] __mutex_lock+0x8e/0x970 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? lock_is_held_type+0xd7/0x130 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? _raw_spin_unlock+0x24/0x40 [15.183838] ? btrfs_get_alloc_profile+0x106/0x230 [btrfs] [15.187601] btrfs_reserve_extent+0x131/0x260 [btrfs] [15. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: lz4: fix LZ4_decompress_safe_partial read out of bound When partialDecoding, it is EOF if we've either filled the output buffer or can't proceed with reading an offset for following match. In some extreme corner cases when compressed data is suitably corrupted, UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial may lead to read out of bound problem during decoding. lz4 upstream has fixed it [2] and this issue has been disscussed here [3] before. current decompression routine was ported from lz4 v1.8.3, bumping lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd better fix it first. [1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/ [2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad# [3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/

In the Linux kernel, the following vulnerability has been resolved: mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0) If an mremap() syscall with old_size=0 ends up in move_page_tables(), it will call invalidate_range_start()/invalidate_range_end() unnecessarily, i.e. with an empty range. This causes a WARN in KVM's mmu_notifier. In the past, empty ranges have been diagnosed to be off-by-one bugs, hence the WARNing. Given the low (so far) number of unique reports, the benefits of detecting more buggy callers seem to outweigh the cost of having to fix cases such as this one, where userspace is doing something silly. In this particular case, an early return from move_page_tables() is enough to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix qgroup reserve overflow the qgroup limit We use extent_changeset->bytes_changed in qgroup_reserve_data() to record how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the bytes_changed is set as "unsigned int", and it will overflow if we try to fallocate a range larger than 4GiB. The result is we reserve less bytes and eventually break the qgroup limit. Unlike regular buffered/direct write, which we use one changeset for each ordered extent, which can never be larger than 256M. For fallocate, we use one changeset for the whole range, thus it no longer respects the 256M per extent limit, and caused the problem. The following example test script reproduces the problem: $ cat qgroup-overflow.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj mkfs.btrfs -f $DEV mount $DEV $MNT # Set qgroup limit to 2GiB. btrfs quota enable $MNT btrfs qgroup limit 2G $MNT # Try to fallocate a 3GiB file. This should fail. echo echo "Try to fallocate a 3GiB file..." fallocate -l 3G $MNT/3G.file # Try to fallocate a 5GiB file. echo echo "Try to fallocate a 5GiB file..." fallocate -l 5G $MNT/5G.file # See we break the qgroup limit. echo sync btrfs qgroup show -r $MNT umount $MNT When running the test: $ ./qgroup-overflow.sh (...) Try to fallocate a 3GiB file... fallocate: fallocate failed: Disk quota exceeded Try to fallocate a 5GiB file... qgroupid         rfer         excl     max_rfer --------         ----         ----     -------- 0/5           5.00GiB      5.00GiB      2.00GiB Since we have no control of how bytes_changed is used, it's better to set it to u64.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix GICR_CTLR.RWP polling It turns out that our polling of RWP is totally wrong when checking for it in the redistributors, as we test the *distributor* bit index, whereas it is a different bit number in the RDs... Oopsie boo. This is embarassing. Not only because it is wrong, but also because it took *8 years* to notice the blunder... Just fix the damn thing.

In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: Fix crash due to OOB write the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." BugLink: https://github.com/openwrt/openwrt/issues/9505

In the Linux kernel, the following vulnerability has been resolved: gpio: Restrict usage of GPIO chip irq members before initialization GPIO chip irq members are exposed before they could be completely initialized and this leads to race conditions. One such issue was observed for the gc->irq.domain variable which was accessed through the I2C interface in gpiochip_to_irq() before it could be initialized by gpiochip_add_irqchip(). This resulted in Kernel NULL pointer dereference. Following are the logs for reference :- kernel: Call Trace: kernel: gpiod_to_irq+0x53/0x70 kernel: acpi_dev_gpio_irq_get_by+0x113/0x1f0 kernel: i2c_acpi_get_irq+0xc0/0xd0 kernel: i2c_device_probe+0x28a/0x2a0 kernel: really_probe+0xf2/0x460 kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0 To avoid such scenarios, restrict usage of GPIO chip irq members before they are completely initialized.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: ili9341: fix optional regulator handling If the optional regulator lookup fails, reset the pointer to NULL. Other functions such as mipi_dbi_poweron_reset_conditional() only do a NULL pointer check and will otherwise dereference the error pointer.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix unregistering of framebuffers without device OF framebuffers do not have an underlying device in the Linux device hierarchy. Do a regular unregister call instead of hot unplugging such a non-existing device. Fixes a NULL dereference. An example error message on ppc64le is shown below. BUG: Kernel NULL pointer dereference on read at 0x00000060 Faulting instruction address: 0xc00000000080dfa4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [...] CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1 NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430 REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000 CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029 GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000 GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283 GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000 GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80 GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0 GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0 GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0 NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0 [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable) [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150 [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0 [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm] [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs] [...] [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0 [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250 The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal"). Most firmware framebuffers have an underlying platform device, which can be hot-unplugged before loading the native graphics driver. OF framebuffers do not (yet) have that device. Fix the code by unregistering the framebuffer as before without a hot unplug. Tested with 5.17 on qemu ppc64le emulation.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled.

In the Linux kernel, the following vulnerability has been resolved: btrfs: release correct delalloc amount in direct IO write path Running generic/406 causes the following WARNING in btrfs_destroy_inode() which tells there are outstanding extents left. In btrfs_get_blocks_direct_write(), we reserve a temporary outstanding extents with btrfs_delalloc_reserve_metadata() (or indirectly from btrfs_delalloc_reserve_space(()). We then release the outstanding extents with btrfs_delalloc_release_extents(). However, the "len" can be modified in the COW case, which releases fewer outstanding extents than expected. Fix it by calling btrfs_delalloc_release_extents() for the original length. To reproduce the warning, the filesystem should be 1 GiB. It's triggering a short-write, due to not being able to allocate a large extent and instead allocating a smaller one. WARNING: CPU: 0 PID: 757 at fs/btrfs/inode.c:8848 btrfs_destroy_inode+0x1e6/0x210 [btrfs] Modules linked in: btrfs blake2b_generic xor lzo_compress lzo_decompress raid6_pq zstd zstd_decompress zstd_compress xxhash zram zsmalloc CPU: 0 PID: 757 Comm: umount Not tainted 5.17.0-rc8+ #101 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014 RIP: 0010:btrfs_destroy_inode+0x1e6/0x210 [btrfs] RSP: 0018:ffffc9000327bda8 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff888100548b78 RCX: 0000000000000000 RDX: 0000000000026900 RSI: 0000000000000000 RDI: ffff888100548b78 RBP: ffff888100548940 R08: 0000000000000000 R09: ffff88810b48aba8 R10: 0000000000000001 R11: ffff8881004eb240 R12: ffff88810b48a800 R13: ffff88810b48ec08 R14: ffff88810b48ed00 R15: ffff888100490c68 FS: 00007f8549ea0b80(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f854a09e733 CR3: 000000010a2e9003 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> destroy_inode+0x33/0x70 dispose_list+0x43/0x60 evict_inodes+0x161/0x1b0 generic_shutdown_super+0x2d/0x110 kill_anon_super+0xf/0x20 btrfs_kill_super+0xd/0x20 [btrfs] deactivate_locked_super+0x27/0x90 cleanup_mnt+0x12c/0x180 task_work_run+0x54/0x80 exit_to_user_mode_prepare+0x152/0x160 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f854a000fb7

In the Linux kernel, the following vulnerability has been resolved: powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit mpe: On 64-bit Book3E vmalloc space starts at 0x8000000000000000. Because of the way __pa() works we have: __pa(0x8000000000000000) == 0, and therefore virt_to_pfn(0x8000000000000000) == 0, and therefore virt_addr_valid(0x8000000000000000) == true Which is wrong, virt_addr_valid() should be false for vmalloc space. In fact all vmalloc addresses that alias with a valid PFN will return true from virt_addr_valid(). That can cause bugs with hardened usercopy as described below by Kefeng Wang: When running ethtool eth0 on 64-bit Book3E, a BUG occurred: usercopy: Kernel memory exposure attempt detected from SLUB object not in SLUB page?! (offset 0, size 1048)! kernel BUG at mm/usercopy.c:99 ... usercopy_abort+0x64/0xa0 (unreliable) __check_heap_object+0x168/0x190 __check_object_size+0x1a0/0x200 dev_ethtool+0x2494/0x2b20 dev_ioctl+0x5d0/0x770 sock_do_ioctl+0xf0/0x1d0 sock_ioctl+0x3ec/0x5a0 __se_sys_ioctl+0xf0/0x160 system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 The code shows below, data = vzalloc(array_size(gstrings.len, ETH_GSTRING_LEN)); copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN)) The data is alloced by vmalloc(), virt_addr_valid(ptr) will return true on 64-bit Book3E, which leads to the panic. As commit 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses") does, make sure the virt addr above PAGE_OFFSET in the virt_addr_valid() for 64-bit, also add upper limit check to make sure the virt is below high_memory. Meanwhile, for 32-bit PAGE_OFFSET is the virtual address of the start of lowmem, high_memory is the upper low virtual address, the check is suitable for 32-bit, this will fix the issue mentioned in commit 602946ec2f90 ("powerpc: Set max_mapnr correctly") too. On 32-bit there is a similar problem with high memory, that was fixed in commit 602946ec2f90 ("powerpc: Set max_mapnr correctly"), but that commit breaks highmem and needs to be reverted. We can't easily fix __pa(), we have code that relies on its current behaviour. So for now add extra checks to virt_addr_valid(). For 64-bit Book3S the extra checks are not necessary, the combination of virt_to_pfn() and pfn_valid() should yield the correct result, but they are harmless. [mpe: Add additional change log detail]

In the Linux kernel, the following vulnerability has been resolved: veth: Ensure eth header is in skb's linear part After feeding a decapsulated packet to a veth device with act_mirred, skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(), which expects at least ETH_HLEN byte of linear data (as __dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes unconditionally). Use pskb_may_pull() to ensure veth_xmit() respects this constraint. kernel BUG at include/linux/skbuff.h:2328! RIP: 0010:eth_type_trans+0xcf/0x140 Call Trace: <IRQ> __dev_forward_skb2+0xe3/0x160 veth_xmit+0x6e/0x250 [veth] dev_hard_start_xmit+0xc7/0x200 __dev_queue_xmit+0x47f/0x520 ? skb_ensure_writable+0x85/0xa0 ? skb_mpls_pop+0x98/0x1c0 tcf_mirred_act+0x442/0x47e [act_mirred] tcf_action_exec+0x86/0x140 fl_classify+0x1d8/0x1e0 [cls_flower] ? dma_pte_clear_level+0x129/0x1a0 ? dma_pte_clear_level+0x129/0x1a0 ? prb_fill_curr_block+0x2f/0xc0 ? skb_copy_bits+0x11a/0x220 __tcf_classify+0x58/0x110 tcf_classify_ingress+0x6b/0x140 __netif_receive_skb_core.constprop.0+0x47d/0xfd0 ? __iommu_dma_unmap_swiotlb+0x44/0x90 __netif_receive_skb_one_core+0x3d/0xa0 netif_receive_skb+0x116/0x170 be_process_rx+0x22f/0x330 [be2net] be_poll+0x13c/0x370 [be2net] __napi_poll+0x2a/0x170 net_rx_action+0x22f/0x2f0 __do_softirq+0xca/0x2a8 __irq_exit_rcu+0xc1/0xe0 common_interrupt+0x83/0xa0

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix the svc_deferred_event trace class Fix a NULL deref crash that occurs when an svc_rqst is deferred while the sunrpc tracing subsystem is enabled. svc_revisit() sets dr->xprt to NULL, so it can't be relied upon in the tracepoint to provide the remote's address. Unfortunately we can't revert the "svc_deferred_class" hunk in commit ece200ddd54b ("sunrpc: Save remote presentation address in svc_xprt for trace events") because there is now a specific check of event format specifiers for unsafe dereferences. The warning that check emits is: event svc_defer_recv has unsafe dereference of argument 1 A "%pISpc" format specifier with a "struct sockaddr *" is indeed flagged by this check. Instead, take the brute-force approach used by the svcrdma_qp_error tracepoint. Convert the dr::addr field into a presentation address in the TP_fast_assign() arm of the trace event, and store that as a string. This fix can be backported to -stable kernels. In the meantime, commit c6ced22997ad ("tracing: Update print fmt check to handle new __get_sockaddr() macro") is now in v5.18, so this wonky fix can be replaced with __sockaddr() and friends properly during the v5.19 merge window.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: unmark inode in use in error path Unmark inode in use if error encountered. If the in-use flag leakage occurs in cachefiles_open_file(), Cachefiles will complain "Inode already in use" when later another cookie with the same index key is looked up. If the in-use flag leakage occurs in cachefiles_create_tmpfile(), though the "Inode already in use" warning won't be triggered, fix the leakage anyway.

In the Linux kernel, the following vulnerability has been resolved: ice: arfs: fix use-after-free when freeing @rx_cpu_rmap The CI testing bots triggered the following splat: [ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80 [ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834 [ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1 [ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020 [ 718.223418] Call Trace: [ 718.227139] [ 718.230783] dump_stack_lvl+0x33/0x42 [ 718.234431] print_address_description.constprop.9+0x21/0x170 [ 718.238177] ? free_irq_cpu_rmap+0x53/0x80 [ 718.241885] ? free_irq_cpu_rmap+0x53/0x80 [ 718.245539] kasan_report.cold.18+0x7f/0x11b [ 718.249197] ? free_irq_cpu_rmap+0x53/0x80 [ 718.252852] free_irq_cpu_rmap+0x53/0x80 [ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice] [ 718.260174] ice_remove_arfs+0x5f/0x70 [ice] [ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice] [ 718.267419] ice_rebuild+0x39c/0xb60 [ice] [ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice] [ 718.278033] ? delay_tsc+0x4a/0xb0 [ 718.281513] ? preempt_count_sub+0x14/0xc0 [ 718.284984] ? delay_tsc+0x8f/0xb0 [ 718.288463] ice_do_reset+0x92/0xf0 [ice] [ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice] [ 718.295561] pci_reset_function+0x53/0x80 <...> [ 718.393035] Allocated by task 690: [ 718.433497] Freed by task 20834: [ 718.495688] Last potentially related work creation: [ 718.568966] The buggy address belongs to the object at ffff8881bd127e00 which belongs to the cache kmalloc-96 of size 96 [ 718.574085] The buggy address is located 0 bytes inside of 96-byte region [ffff8881bd127e00, ffff8881bd127e60) [ 718.579265] The buggy address belongs to the page: [ 718.598905] Memory state around the buggy address: [ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 718.610811] ^ [ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc [ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc This is due to that free_irq_cpu_rmap() is always being called *after* (devm_)free_irq() and thus it tries to work with IRQ descs already freed. For example, on device reset the driver frees the rmap right before allocating a new one (the splat above). Make rmap creation and freeing function symmetrical with {request,free}_irq() calls i.e. do that on ifup/ifdown instead of device probe/remove/resume. These operations can be performed independently from the actual device aRFS configuration. Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers only when aRFS is disabled -- otherwise, CPU rmap sets and clears its own and they must not be touched manually.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr Use the actual length of volume coherency data when setting the xattr to avoid the following KASAN report. BUG: KASAN: slab-out-of-bounds in cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] Write of size 4 at addr ffff888101e02af4 by task kworker/6:0/1347 CPU: 6 PID: 1347 Comm: kworker/6:0 Kdump: loaded Not tainted 5.18.0-rc1-nfs-fscache-netfs+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 Workqueue: events fscache_create_volume_work [fscache] Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_report+0xab/0x120 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] ? __cachefiles_free_volume+0x90/0x90 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 ? process_one_work+0x6a0/0x6a0 kthread+0x16c/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Allocated by task 1347: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 cachefiles_set_volume_xattr+0x76/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 kthread+0x16c/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888101e02af0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 4 bytes inside of 8-byte region [ffff888101e02af0, ffff888101e02af8) The buggy address belongs to the physical page: page:00000000a2292d70 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x101e02 flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 0000000000000000 dead000000000001 ffff888100042280 raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888101e02980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc ffff888101e02a00: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 >ffff888101e02a80: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 04 fc ^ ffff888101e02b00: fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc ffff888101e02b80: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc ==================================================================

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function. Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() dev_name() was called with dev.parent as argument but without to NULL-check it before. Solve this by checking the pointer before the call to dev_name().

In the Linux kernel, the following vulnerability has been resolved: cifs: potential buffer overflow in handling symlinks Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max) It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer.

In the Linux kernel, the following vulnerability has been resolved: block: null_blk: end timed out poll request When poll request is timed out, it is removed from the poll list, but not completed, so the request is leaked, and never get chance to complete. Fix the issue by ending it in timeout handler.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check for potential null return of kmalloc_array() As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests hv_panic_page might contain guest-sensitive information, do not dump it over to Hyper-V by default in isolated guests. While at it, update some comments in hyperv_{panic,die}_event().

In the Linux kernel, the following vulnerability has been resolved: mm: fix unexpected zeroed page mapping with zram swap Two processes under CLONE_VM cloning, user process can be corrupted by seeing zeroed page unexpectedly. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage valid data swap_slot_free_notify delete zram entry swap_readpage zeroed(invalid) data pte_lock map the *zero data* to userspace pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return and next refault will read zeroed data The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't increase the refcount of swap slot at copy_mm so it couldn't catch up whether it's safe or not to discard data from backing device. In the case, only the lock it could rely on to synchronize swap slot freeing is page table lock. Thus, this patch gets rid of the swap_slot_free_notify function. With this patch, CPU A will see correct data. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage original data pte_lock map the original data swap_free swap_range_free bd_disk->fops->swap_slot_free_notify swap_readpage read zeroed data pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return on next refault will see mapped data by CPU B The concern of the patch would increase memory consumption since it could keep wasted memory with compressed form in zram as well as uncompressed form in address space. However, most of cases of zram uses no readahead and do_swap_page is followed by swap_free so it will free the compressed form from in zram quickly.

In the Linux kernel, the following vulnerability has been resolved: net: usb: aqc111: Fix out-of-bounds accesses in RX fixup aqc111_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. Found doing variant analysis. Tested it with another driver (ax88179_178a), since I don't have a aqc111 device to test it, but the code looks very similar.

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix platform-device leak in error path Make sure to free the flash platform device in the event that registration fails during probe.

In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix panic when growing a memfd_secret When one tries to grow an existing memfd_secret with ftruncate, one gets a panic [1]. For example, doing the following reliably induces the panic: fd = memfd_secret(); ftruncate(fd, 10); ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); strcpy(ptr, "123456789"); munmap(ptr, 10); ftruncate(fd, 20); The basic reason for this is, when we grow with ftruncate, we call down into simple_setattr, and then truncate_inode_pages_range, and eventually we try to zero part of the memory. The normal truncation code does this via the direct map (i.e., it calls page_address() and hands that to memset()). For memfd_secret though, we specifically don't map our pages via the direct map (i.e. we call set_direct_map_invalid_noflush() on every fault). So the address returned by page_address() isn't useful, and when we try to memset() with it we panic. This patch avoids the panic by implementing a custom setattr for memfd_secret, which detects resizes specifically (setting the size for the first time works just fine, since there are no existing pages to try to zero), and rejects them with EINVAL. One could argue growing should be supported, but I think that will require a significantly more lengthy change. So, I propose a minimal fix for the benefit of stable kernels, and then perhaps to extend memfd_secret to support growing in a separate patch. [1]: BUG: unable to handle page fault for address: ffffa0a889277028 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8 RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028 RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028 R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0 R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8 FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? zero_user_segments+0x82/0x190 truncate_inode_partial_folio+0xd4/0x2a0 truncate_inode_pages_range+0x380/0x830 truncate_setsize+0x63/0x80 simple_setattr+0x37/0x60 notify_change+0x3d8/0x4d0 do_sys_ftruncate+0x162/0x1d0 __x64_sys_ftruncate+0x1c/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet CR2: ffffa0a889277028 [lkp@intel.com: secretmem_iops can be static] [axelrasmussen@google.com: return EINVAL]

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix panic when forwarding a pkt with no in6 dev kongweibin reported a kernel panic in ip6_forward() when input interface has no in6 dev associated. The following tc commands were used to reproduce this panic: tc qdisc del dev vxlan100 root tc qdisc add dev vxlan100 root netem corrupt 5%

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: dm integrity: fix memory corruption when tag_size is less than digest size It is possible to set up dm-integrity in such a way that the "tag_size" parameter is less than the actual digest size. In this situation, a part of the digest beyond tag_size is ignored. In this case, dm-integrity would write beyond the end of the ic->recalc_tags array and corrupt memory. The corruption happened in integrity_recalc->integrity_sector_checksum->crypto_shash_final. Fix this corruption by increasing the tags array so that it has enough padding at the end to accomodate the loop in integrity_recalc() being able to write a full digest size for the last member of the tags array.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it!

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()' All error handling paths lead to 'out' where many resources are freed. Do it as well here instead of a direct return, otherwise 'log', 'ra' and 'log->one_page_buf' (at least) will leak.

In the Linux kernel, the following vulnerability has been resolved: drm/plane: Move range check for format_count earlier While the check for format_count > 64 in __drm_universal_plane_init() shouldn't be hit (it's a WARN_ON), in its current position it will then leak the plane->format_types array and fail to call drm_mode_object_unregister() leaking the modeset identifier. Move it to the start of the function to avoid allocating those resources in the first place.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it!

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

In the Linux kernel, the following vulnerability has been resolved: media: venus: vdec: fixed possible memory leak issue The venus_helper_alloc_dpb_bufs() implementation allows an early return on an error path when checking the id from ida_alloc_min() which would not release the earlier buffer allocation. Move the direct kfree() from the error checking of dma_alloc_attrs() to the common fail path to ensure that allocations are released on all error paths in this function. Addresses-Coverity: 1494120 ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe() I got a null-ptr-deref report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:fb_destroy_modelist+0x38/0x100 ... Call Trace: ufx_usb_probe.cold+0x2b5/0xac1 [smscufx] usb_probe_interface+0x1aa/0x3c0 [usbcore] really_probe+0x167/0x460 ... ret_from_fork+0x1f/0x30 If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will be called to destroy modelist in the error handling path. But modelist has not been initialized yet, so it will result in null-ptr-deref. Initialize modelist before calling fb_alloc_cmap() to fix this bug.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: rpmpd: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-compress: prevent the potentially use of null pointer There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'.

In the Linux kernel, the following vulnerability has been resolved: udmabuf: validate ubuf->pagecount Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The problem was in ubuf->pages == ZERO_PTR. ubuf->pagecount is calculated from arguments passed from user-space. If user creates udmabuf with list.size == 0 then ubuf->pagecount will be also equal to zero; it causes kmalloc_array() to return ZERO_PTR. Fix it by validating ubuf->pagecount before passing it to kmalloc_array().

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a memory leak in 'host1x_remove()' Add a missing 'host1x_channel_list_free()' call in the remove function, as already done in the error handling path of the probe function.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: fix PCI-E clock oops Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]---

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com On the case tmp_dcim=1, the index of buffer is miscalculated. This generate a NULL pointer dereference later. So let's fix the calcul and add a check to prevent this to reappear.

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: move videodev alloc Move some code out of zr36057_init() and create new functions for handling zr->video_dev. This permit to ease code reading and fix a zr->video_dev memory leak.

In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: free before error exiting Fix leak in error path.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: cirrusfb: check pixclock to avoid divide by zero Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae