Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl We need to release directory fid if we fail halfway through open This fixes fid leaking with xfstests generic 531

In the Linux kernel, the following vulnerability has been resolved: 9p: fix fid refcount leak in v9fs_vfs_get_link we check for protocol version later than required, after a fid has been obtained. Just move the version check earlier.

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Store vhost pointer during subcrq allocation Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when block group reclaim task is running When we start an unmount, at close_ctree(), if we have the reclaim task running and in the middle of a data block group relocation, we can trigger a deadlock when stopping an async reclaim task, producing a trace like the following: [629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000 [629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [629724.501267] Call Trace: [629724.501759] <TASK> [629724.502174] __schedule+0x3cb/0xed0 [629724.502842] schedule+0x4e/0xb0 [629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs] [629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0 [629724.505442] flush_space+0x423/0x630 [btrfs] [629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50 [629724.507259] ? lock_release+0x220/0x4a0 [629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs] [629724.508940] ? do_raw_spin_unlock+0x4b/0xa0 [629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs] [629724.510922] process_one_work+0x252/0x5a0 [629724.511694] ? process_one_work+0x5a0/0x5a0 [629724.512508] worker_thread+0x52/0x3b0 [629724.513220] ? process_one_work+0x5a0/0x5a0 [629724.514021] kthread+0xf2/0x120 [629724.514627] ? kthread_complete_and_exit+0x20/0x20 [629724.515526] ret_from_fork+0x22/0x30 [629724.516236] </TASK> [629724.516694] task:umount state:D stack: 0 pid:719055 ppid:695412 flags:0x00004000 [629724.518269] Call Trace: [629724.518746] <TASK> [629724.519160] __schedule+0x3cb/0xed0 [629724.519835] schedule+0x4e/0xb0 [629724.520467] schedule_timeout+0xed/0x130 [629724.521221] ? lock_release+0x220/0x4a0 [629724.521946] ? lock_acquired+0x19c/0x420 [629724.522662] ? trace_hardirqs_on+0x1b/0xe0 [629724.523411] __wait_for_common+0xaf/0x1f0 [629724.524189] ? usleep_range_state+0xb0/0xb0 [629724.524997] __flush_work+0x26d/0x530 [629724.525698] ? flush_workqueue_prep_pwqs+0x140/0x140 [629724.526580] ? lock_acquire+0x1a0/0x310 [629724.527324] __cancel_work_timer+0x137/0x1c0 [629724.528190] close_ctree+0xfd/0x531 [btrfs] [629724.529000] ? evict_inodes+0x166/0x1c0 [629724.529510] generic_shutdown_super+0x74/0x120 [629724.530103] kill_anon_super+0x14/0x30 [629724.530611] btrfs_kill_super+0x12/0x20 [btrfs] [629724.531246] deactivate_locked_super+0x31/0xa0 [629724.531817] cleanup_mnt+0x147/0x1c0 [629724.532319] task_work_run+0x5c/0xa0 [629724.532984] exit_to_user_mode_prepare+0x1a6/0x1b0 [629724.533598] syscall_exit_to_user_mode+0x16/0x40 [629724.534200] do_syscall_64+0x48/0x90 [629724.534667] entry_SYSCALL_64_after_hwframe+0x44/0xae [629724.535318] RIP: 0033:0x7fa2b90437a7 [629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7 [629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0 [629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200 [629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000 [629724.541796] </TASK> This happens because: 1) Before entering close_ctree() we have the async block group reclaim task running and relocating a data block group; 2) There's an async metadata (or data) space reclaim task running; 3) We enter close_ctree() and park the cleaner kthread; 4) The async space reclaim task is at flush_space() and runs all the existing delayed iputs; 5) Before the async space reclaim task calls btrfs_wait_on_delayed_iputs(), the block group reclaim task which is doing the data block group relocation, creates a delayed iput at replace_file_extents() (called when COWing leaves that have file extent items pointing to relocated data exten ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Allocate/free queue resource only during probe/remove Currently, the sub-queues and event pool resources are allocated/freed for every CRQ connection event such as reset and LPM. This exposes the driver to a couple issues. First the inefficiency of freeing and reallocating memory that can simply be resued after being sanitized. Further, a system under memory pressue runs the risk of allocation failures that could result in a crippled driver. Finally, there is a race window where command submission/compeletion can try to pull/return elements from/to an event pool that is being deleted or already has been deleted due to the lack of host state around freeing/allocating resources. The following is an example of list corruption following a live partition migration (LPM): Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1 NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10 REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f CFAR: c0000000001f55bc IRQMASK: 0 GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027 GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000 GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300 GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000 GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300 NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100 LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 Call Trace: [c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable) [c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc] [c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc] [c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc] [c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc] [c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc] [c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0 [c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78 3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640 ---[ end trace 11a2b65a92f8b66c ]--- ibmvfc 30000003: Send warning. Receive queue closed, will retry. Add registration/deregistration helpers that are called instead during connection resets to sanitize and reconfigure the queues.

In the Linux kernel, the following vulnerability has been resolved: filemap: Handle sibling entries in filemap_get_read_batch() If a read races with an invalidation followed by another read, it is possible for a folio to be replaced with a higher-order folio. If that happens, we'll see a sibling entry for the new folio in the next iteration of the loop. This manifests as a NULL pointer dereference while holding the RCU read lock. Handle this by simply returning. The next call will find the new folio and handle it correctly. The other ways of handling this rare race are more complex and it's just not worth it.

In the Linux kernel, the following vulnerability has been resolved: netfilter: use get_random_u32 instead of prandom bh might occur while updating per-cpu rnd_state from user context, ie. local_out path. BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725 caller is nft_ng_random_eval+0x24/0x54 [nft_numgen] Call Trace: check_preemption_disabled+0xde/0xe0 nft_ng_random_eval+0x24/0x54 [nft_numgen] Use the random driver instead, this also avoids need for local prandom state. Moreover, prandom now uses the random driver since d4150779e60f ("random32: use real rng for non-deterministic randomness"). Based on earlier patch from Pablo Neira.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix request_sock leak in sk lookup helpers A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Patchwork: https://patchwork.freedesktop.org/patch/488473/

In the Linux kernel, the following vulnerability has been resolved: net: phy: at803x: fix NULL pointer dereference on AR9331 PHY Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too.

In the Linux kernel, the following vulnerability has been resolved: erspan: do not assume transport header is always set Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK>

In the Linux kernel, the following vulnerability has been resolved: afs: Fix dynamic root getattr The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix list double add in uvcg_video_pump A panic can occur if the endpoint becomes disabled and the uvcg_video_pump adds the request back to the req_free list after it has already been queued to the endpoint. The endpoint complete will add the request back to the req_free list. Invalidate the local request handle once it's been queued. <6>[ 246.796704][T13726] configfs-gadget gadget: uvc: uvc_function_set_alt(1, 0) <3>[ 246.797078][ T26] list_add double add: new=ffffff878bee5c40, prev=ffffff878bee5c40, next=ffffff878b0f0a90. <6>[ 246.797213][ T26] ------------[ cut here ]------------ <2>[ 246.797224][ T26] kernel BUG at lib/list_debug.c:31! <6>[ 246.807073][ T26] Call trace: <6>[ 246.807180][ T26] uvcg_video_pump+0x364/0x38c <6>[ 246.807366][ T26] process_one_work+0x2a4/0x544 <6>[ 246.807394][ T26] worker_thread+0x350/0x784 <6>[ 246.807442][ T26] kthread+0x2ac/0x320

In the Linux kernel, the following vulnerability has been resolved: iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data of_find_node_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: xtensa: Fix refcount leak bug in time.c In calibrate_ccount(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: xtensa: xtfpga: Fix refcount leak bug in setup In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: ARM: exynos: Fix refcount leak in exynos_map_pmu of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer.

In the Linux kernel, the following vulnerability has been resolved: ARM: Fix refcount leak in axxia_boot_secondary of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. In brcmstb_init_sram, it pass dn to of_address_to_resource(), of_address_to_resource() will call of_find_device_by_node() to take reference, so we should release the reference returned by of_find_matching_node().

In the Linux kernel, the following vulnerability has been resolved: ARM: cns3xxx: Fix refcount leak in cns3xxx_init of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function doesn't call of_node_put() in some error paths. To unify the structure, Add put_node label and goto it on errors.

In the Linux kernel, the following vulnerability has been resolved: tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c.

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix accesses beyond end of raid member array On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled).

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix KASAN warning in raid5_add_disks There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits.

In the Linux kernel, the following vulnerability has been resolved: net: tun: unlink NAPI from device on destruction Syzbot found a race between tun file and device destruction. NAPIs live in struct tun_file which can get destroyed before the netdev so we have to del them explicitly. The current code is missing deleting the NAPI if the queue was detached first.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix memory leak in ib_cm_insert_listen cm_alloc_id_priv() allocates resource for the cm_id_priv. When cm_init_listen() fails it doesn't free it, leading to memory leak. Add the missing error unwind.

In the Linux kernel, the following vulnerability has been resolved: linux/dim: Fix divide by 0 in RDMA DIM Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. This function only calls of_node_put() in normal path, missing it in error paths. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource Unlike release_mem_region(), a call to release_resource() does not free the resource, so it has to be freed explicitly to avoid a memory leak.

In the Linux kernel, the following vulnerability has been resolved: tipc: move bc link creation back to tipc_node_create Shuang Li reported a NULL pointer dereference crash: [] BUG: kernel NULL pointer dereference, address: 0000000000000068 [] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc] [] Call Trace: [] <IRQ> [] tipc_bcast_rcv+0xa2/0x190 [tipc] [] tipc_node_bc_rcv+0x8b/0x200 [tipc] [] tipc_rcv+0x3af/0x5b0 [tipc] [] tipc_udp_recv+0xc7/0x1e0 [tipc] It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it creates a node in tipc_node_check_dest(), after inserting the new node into hashtable in tipc_node_create(), it creates the bc link. However, there is a gap between this insert and bc link creation, a bc packet may come in and get the node from the hashtable then try to dereference its bc link, which is NULL. This patch is to fix it by moving the bc link creation before inserting into the hashtable. Note that for a preliminary node becoming "real", the bc link creation should also be called before it's rehashed, as we don't create it for preliminary nodes.

In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header was not set") caught a bug in skb_tunnel_check_pmtu(), as shown in this syzbot report [1]. In ndo_start_xmit() paths, there is really no need to use skb->mac_header, because skb->data is supposed to point at it. [1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Modules linked in: CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted 5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline] RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00 RSP: 0018:ffffc90002e4f520 EFLAGS: 00010212 RAX: 0000000000000324 RBX: ffff88804d5fd500 RCX: ffffc90005b52000 RDX: 0000000000040000 RSI: ffffffff87f05e3e RDI: 0000000000000003 RBP: ffffc90002e4f650 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: 000000000000ffff R13: 0000000000000000 R14: 000000000000ffcd R15: 000000000000001f FS: 00007f3babba9700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000075319000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> geneve_xmit_skb drivers/net/geneve.c:927 [inline] geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107 __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] __dev_direct_xmit+0x500/0x730 net/core/dev.c:4309 dev_direct_xmit include/linux/netdevice.h:3007 [inline] packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282 packet_snd net/packet/af_packet.c:3073 [inline] packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2489 ___sys_sendmsg+0xf3/0x170 net/socket.c:2543 __sys_sendmsg net/socket.c:2572 [inline] __do_sys_sendmsg net/socket.c:2581 [inline] __se_sys_sendmsg net/socket.c:2579 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3baaa89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3babba9168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3baab9bf60 RCX: 00007f3baaa89109 RDX: 0000000000000000 RSI: 0000000020000a00 RDI: 0000000000000003 RBP: 00007f3baaae305d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe74f2543f R14: 00007f3babba9300 R15: 0000000000022000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix lockdep splat in in6_dump_addrs() As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_open/close(): fix memory leak The gs_usb driver appears to suffer from a malady common to many USB CAN adapter drivers in that it performs usb_alloc_coherent() to allocate a number of USB request blocks (URBs) for RX, and then later relies on usb_kill_anchored_urbs() to free them, but this doesn't actually free them. As a result, this may be leaking DMA memory that's been used by the driver. This commit is an adaptation of the techniques found in the esd_usb2 driver where a similar design pattern led to a memory leak. It explicitly frees the RX URBs and their DMA memory via a call to usb_free_coherent(). Since the RX URBs were allocated in the gs_can_open(), we remove them in gs_can_close() rather than in the disconnect function as was done in esd_usb2. For more information, see the 928150fad41b ("can: esd_usb2: fix memory leak").

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload.

In the Linux kernel, the following vulnerability has been resolved: usbnet: fix memory leak in error case usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer

In the Linux kernel, the following vulnerability has been resolved: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: i2c: piix4: Fix a memory leak in the EFCH MMIO support The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. Add missing of_node_put() in to fix this.

In the Linux kernel, the following vulnerability has been resolved: xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty.

In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Fix memory leak problem This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac. As commit 46bbe5c671e0 ("tracing: fix double free") said, the "double free" problem reported by clang static analyzer is: > In parse_var_defs() if there is a problem allocating > var_defs.expr, the earlier var_defs.name is freed. > This free is duplicated by free_var_defs() which frees > the rest of the list. However, if there is a problem allocating N-th var_defs.expr: + in parse_var_defs(), the freed 'earlier var_defs.name' is actually the N-th var_defs.name; + then in free_var_defs(), the names from 0th to (N-1)-th are freed; IF ALLOCATING PROBLEM HAPPENED HERE!!! -+ \ | 0th 1th (N-1)-th N-th V +-------------+-------------+-----+-------------+----------- var_defs: | name | expr | name | expr | ... | name | expr | name | /// +-------------+-------------+-----+-------------+----------- These two frees don't act on same name, so there was no "double free" problem before. Conversely, after that commit, we get a "memory leak" problem because the above "N-th var_defs.name" is not freed. If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th var_defs.expr allocated, then execute on shell like: $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger Then kmemleak reports: unreferenced object 0xffff8fb100ef3518 (size 8): comm "bash", pid 196, jiffies 4295681690 (age 28.538s) hex dump (first 8 bytes): 76 31 00 00 b1 8f ff ff v1...... backtrace: [<0000000038fe4895>] kstrdup+0x2d/0x60 [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0 [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110 [<0000000066737a4c>] event_trigger_write+0x75/0xd0 [<000000007341e40c>] vfs_write+0xbb/0x2a0 [<0000000087fde4c2>] ksys_write+0x59/0xd0 [<00000000581e9cdf>] do_syscall_64+0x3a/0x80 [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix queue selection for mesh/OCB interfaces When using iTXQ, the code assumes that there is only one vif queue for broadcast packets, using the BE queue. Allowing non-BE queue marking violates that assumption and txq->ac == skb_queue_mapping is no longer guaranteed. This can cause issues with queue handling in the driver and also causes issues with the recent ATF change, resulting in an AQL underflow warning.

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Fix shrinker list corruption by madvise IOCTL Calling madvise IOCTL twice on BO causes memory shrinker list corruption and crashes kernel because BO is already on the list and it's added to the list again, while BO should be removed from the list before it's re-added. Fix it.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector() If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)

In the Linux kernel, the following vulnerability has been resolved: ima: Fix a potential integer overflow in ima_appraise_measurement When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be negative, which may cause the integer overflow problem.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwc-qos: Disable split header for Tegra194 There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/

In the Linux kernel, the following vulnerability has been resolved: sysctl: Fix data races in proc_douintvec(). A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

In the Linux kernel, the following vulnerability has been resolved: sysctl: Fix data races in proc_douintvec_minmax(). A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_douintvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

In the Linux kernel, the following vulnerability has been resolved: cipso: Fix data-races around sysctl. While reading cipso sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races.