DNS vulnerabilities

A use-after-free vulnerability exists within the DNS-over-HTTPS implementation. This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1. BIND 9 versions 9.18.0 through 9.18.48 and 9.18.11-S1 through 9.18.48-S1 are NOT affected.

Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.4.0rc2, the twisted.names module is vulnerable to a Denial of Service (DoS) attack via resource exhaustion during DNS name decompression. A remote, unauthenticated attacker can exploit this by sending a crafted TCP DNS packet containing deeply chained compression pointers. This flaw bypasses previous loop-prevention logic, causing the single-threaded Twisted reactor to hang while processing millions of recursive lookups, effectively freezing the server. This vulnerability is fixed in 26.4.0rc2.

Heap-based buffer overflow in Microsoft Windows DNS allows an unauthorized attacker to execute code over a network.

By publishing and querying a crafted zone an attacker can cause allocation of large entries in the negative and aggressive NSEC(3) caches.

Reliance on untrusted inputs in a security decision in Windows Boot Loader allows an authorized attacker to bypass a security feature locally.

A weakness has been identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this vulnerability is the function FMT_restart/Status_HDInfo/SMART_List/ScanDisk_info/ScanDisk/volume_status/Get_Volume_Mapping/FMT_check_disk_remount_state/FMT_rebuildinfo/FMT_result_list/FMT_result_list_phy/FMT_get_dminfo/FMT_manually_rebuild_info/Get_current_raidtype of the file /cgi-bin/dsk_mgr.cgi. Executing a manipulation can lead to improper access controls. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected is the function Webdav_Access_List of the file /cgi-bin/file_center.cgi. Performing a manipulation of the argument cmd results in improper access controls. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_get_ipv6 of the file /cgi-bin/network_mgr.cgi. Such manipulation leads to improper access controls. The exploit is publicly available and might be used.

An attacker might be able to trigger an out-of-bounds read by sending a crafted DNS response packet, when custom Lua code uses newDNSPacketOverlay to parse DNS packets. The out-of-bounds read might trigger a crash, leading to a denial of service, or access unrelated memory, leading to potential information disclosure.

A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain. This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1. BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected.

If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make recursive queries (see: https://kb.isc.org/docs/why-does-my-authoritative-server-make-recursive-queries). This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.46, 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.46-S1, and 9.20.9-S1 through 9.20.20-S1.

libfuse is the reference implementation of the Linux FUSE. From version 3.18.0 to before version 3.18.2, a use-after-free vulnerability in the io_uring subsystem of libfuse allows a local attacker to crash FUSE filesystem processes and potentially execute arbitrary code. When io_uring thread creation fails due to resource exhaustion (e.g., cgroup pids.max), fuse_uring_start() frees the ring pool structure but stores the dangling pointer in the session state, leading to a use-after-free when the session shuts down. The trigger is reliable in containerized environments where cgroup pids.max limits naturally constrain thread creation. This issue has been patched in version 3.18.2.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

dns_unpack_name() caches the buffer tailroom once and reuses it while appending DNS labels. As the buffer grows, the cached size becomes incorrect, and the final null terminator can be written past the buffer. With assertions disabled (default), a malicious DNS response can trigger an out-of-bounds write when CONFIG_DNS_RESOLVER is enabled.

A denial-of-service (DoS) vulnerability in the Advanced DNS Security (ADNS) feature of Palo Alto Networks PAN-OS® software enables an unauthenticated attacker to initiate system reboots using a maliciously crafted packet. Repeated attempts to initiate a reboot causes the firewall to enter maintenance mode. Cloud NGFW and Prisma Access® are not impacted by this vulnerability.

Malformed BRID/HHIT records can cause `named` to terminate unexpectedly. This issue affects BIND 9 versions 9.18.40 through 9.18.43, 9.20.13 through 9.20.17, 9.21.12 through 9.21.16, 9.18.40-S1 through 9.18.43-S1, and 9.20.13-S1 through 9.20.17-S1.

SOUND4 IMPACT/FIRST/PULSE/Eco <=2.x contains a command injection vulnerability that allows local authenticated users to create malicious files in the /tmp directory with .dns.pid extension. Unauthenticated attackers can execute the malicious commands by making a single HTTP POST request to the vulnerable dns.php script, which triggers command execution and then deletes the file.

The Social Reviews & Recommendations plugin for WordPress is vulnerable to Stored Cross-Site Scripting via several parameters in the 'trim_text' function in all versions up to, and including, 2.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability was partially patched in version 2.5.

Querying for records within a specially crafted zone containing certain malformed DNSKEY records can lead to CPU exhaustion. This issue affects BIND 9 versions 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.

In specific circumstances, due to a weakness in the Pseudo Random Number Generator (PRNG) that is used, it is possible for an attacker to predict the source port and query ID that BIND will use. This issue affects BIND 9 versions 9.16.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.16.8-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.

Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache. This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.

If a `named` caching resolver is configured with `serve-stale-enable` `yes`, and with `stale-answer-client-timeout` set to `0` (the only allowable value other than `disabled`), and if the resolver, in the process of resolving a query, encounters a CNAME chain involving a specific combination of cached or authoritative records, the daemon will abort with an assertion failure. This issue affects BIND 9 versions 9.20.0 through 9.20.10, 9.21.0 through 9.21.9, and 9.20.9-S1 through 9.20.10-S1.

A `named` caching resolver that is configured to send ECS (EDNS Client Subnet) options may be vulnerable to a cache-poisoning attack. This issue affects BIND 9 versions 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.37-S1, and 9.20.9-S1 through 9.20.10-S1.

When an incoming DNS protocol message includes a Transaction Signature (TSIG), BIND always checks it. If the TSIG contains an invalid value in the algorithm field, BIND immediately aborts with an assertion failure. This issue affects BIND 9 versions 9.20.0 through 9.20.8 and 9.21.0 through 9.21.7.

Gardener External DNS Management is an environment to manage external DNS entries for a kubernetes cluster. A security vulnerability was discovered in Gardener's External DNS Management prior to version 0.23.6 that could allow a user with administrative privileges for a Gardener project or a user with administrative privileges for a shoot cluster, including administrative privileges for a single namespace of the shoot cluster, to obtain control over the seed cluster where the shoot cluster is managed. This CVE affects all Gardener installations no matter of the public cloud provider(s) used for the seed clusters/shoot clusters. The affected component is `gardener/external-dns-management`. The `external-dns-management` component may also be deployed on the seeds by the `gardener/gardener-extension-shoot-dns-service` extension when the extension is enabled. In this case, all versions of the `shoot-dns-service` extension `<= v1.60.0` are affected by this vulnerability. Version 0.23.6 of Gardener External DNS Management fixes the issue.

Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic. This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1.

It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure. This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1.

A Denial of Service vulnerability in the DNS Security feature of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to send a malicious packet through the data plane of the firewall that reboots the firewall. Repeated attempts to trigger this condition will cause the firewall to enter maintenance mode.

A flaw was found in Aardvark-dns, which is vulnerable to a Denial of Service attack due to the serial processing of TCP DNS queries. An attacker can exploit this flaw by keeping a TCP connection open indefinitely, causing the server to become unresponsive and resulting in other DNS queries timing out. This issue prevents legitimate users from accessing DNS services, thereby disrupting normal operations and causing service downtime.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this issue is the function cgi_audio_search/cgi_create_playlist/cgi_get_album_all_tracks/cgi_get_alltracks_editlist/cgi_get_artist_all_album/cgi_get_genre_all_tracks/cgi_get_tracks_list/cgi_set_airplay_content/cgi_write_playlist of the file /cgi-bin/myMusic.cgi. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_del_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

Client queries that trigger serving stale data and that also require lookups in local authoritative zone data may result in an assertion failure. This issue affects BIND 9 versions 9.16.13 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.33-S1 through 9.11.37-S1, 9.16.13-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1.

If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests. This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1.

Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name. This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1.

A malicious client can send many DNS messages over TCP, potentially causing the server to become unstable while the attack is in progress. The server may recover after the attack ceases. Use of ACLs will not mitigate the attack. This issue affects BIND 9 versions 9.18.1 through 9.18.27, 9.19.0 through 9.19.24, and 9.18.11-S1 through 9.18.27-S1.

dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0.

FreeRTOS-Plus-TCP is a lightweight TCP/IP stack for FreeRTOS. FreeRTOS-Plus-TCP versions 4.0.0 through 4.1.0 contain a buffer over-read issue in the DNS Response Parser when parsing domain names in a DNS response. A carefully crafted DNS response with domain name length value greater than the actual domain name length, could cause the parser to read beyond the DNS response buffer. This issue affects applications using DNS functionality of the FreeRTOS-Plus-TCP stack. Applications that do not use DNS functionality are not affected, even when the DNS functionality is enabled. This vulnerability has been patched in version 4.1.1.

dnsmasq 2.9 is vulnerable to Integer Overflow via forward_query.

A medium severity vulnerability has been identified in the update mechanism of the Phish Alert Button for Outlook, which could allow an attacker to remotely execute arbitrary code on the host machine. The vulnerability arises from the application's failure to securely verify the authenticity and integrity of the update server. The application periodically checks for updates by querying a specific URL. However, this process does not enforce strict SSL/TLS verification, nor does it validate the digital signature of the received update files. An attacker with the capability to perform DNS spoofing can exploit this weakness. By manipulating DNS responses, the attacker can redirect the application's update requests to a malicious server under their control. Once the application queries the spoofed update URL, the malicious server can respond with a crafted update package. Since the application fails to properly verify the authenticity of the update file, it will accept and execute the package, leading to arbitrary code execution on the host machine. Impact: Successful exploitation of this vulnerability allows an attacker to execute code with elevated privileges, potentially leading to data theft, installation of further malware, or other malicious activities on the host system. Affected Products: Phish Alert Button (PAB) for Outlook versions 1.10.0-1.10.11 Second Chance Client versions 2.0.0-2.0.9 PIQ Client versions 1.0.0-1.0.15 Remediation: Automated updates will be pushed to address this issue. Users of affected versions should verify the latest version is applied and, if not, apply the latest updates provided by KnowBe4, which addresses this vulnerability by implementing proper SSL/TLS checks of the update server. It is also recommended to ensure DNS settings are secure to prevent DNS spoofing attacks. Workarounds: Use secure corporate networks or VPN services to secure network communications, which can help mitigate the risk of DNS spoofing. Credits: This vulnerability was discovered by Ceri Coburn at Pen Test Partners, who reported it responsibly to the vendor.

eventlet before 0.35.2, as used in dnspython before 2.6.0, allows remote attackers to interfere with DNS name resolution by quickly sending an invalid packet from the expected IP address and source port, aka a "TuDoor" attack. In other words, dnspython does not have the preferred behavior in which the DNS name resolution algorithm would proceed, within the full time window, in order to wait for a valid packet. NOTE: dnspython 2.6.0 is unusable for a different reason that was addressed in 2.6.1.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as very critical, has been found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. This issue affects some unknown processing of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument user with the input messagebus leads to hard-coded credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259283. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Prior to versions 2.8.13, 2.9.9, and 2.10.4, an attacker can exploit a critical flaw in the application to initiate a Denial of Service (DoS) attack, rendering the application inoperable and affecting all users. The issue arises from unsafe manipulation of an array in a multi-threaded environment. The vulnerability is rooted in the application's code, where an array is being modified while it is being iterated over. This is a classic programming error but becomes critically unsafe when executed in a multi-threaded environment. When two threads interact with the same array simultaneously, the application crashes. This is a Denial of Service (DoS) vulnerability. Any attacker can crash the application continuously, making it impossible for legitimate users to access the service. The issue is exacerbated because it does not require authentication, widening the pool of potential attackers. Versions 2.8.13, 2.9.9, and 2.10.4 contain a patch for this issue.

The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the "NSEC3" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.

Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the "KeyTrap" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.

The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.

If the `recursive-clients` quota is reached on a BIND 9 resolver configured with both `stale-answer-enable yes;` and `stale-answer-client-timeout 0;`, a sequence of serve-stale-related lookups could cause `named` to loop and terminate unexpectedly due to a stack overflow. This issue affects BIND 9 versions 9.16.33 through 9.16.41, 9.18.7 through 9.18.15, 9.16.33-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1.

A `named` instance configured to run as a DNSSEC-validating recursive resolver with the Aggressive Use of DNSSEC-Validated Cache (RFC 8198) option (`synth-from-dnssec`) enabled can be remotely terminated using a zone with a malformed NSEC record. This issue affects BIND 9 versions 9.16.8-S1 through 9.16.41-S1 and 9.18.11-S1 through 9.18.15-S1.

Every `named` instance configured to run as a recursive resolver maintains a cache database holding the responses to the queries it has recently sent to authoritative servers. The size limit for that cache database can be configured using the `max-cache-size` statement in the configuration file; it defaults to 90% of the total amount of memory available on the host. When the size of the cache reaches 7/8 of the configured limit, a cache-cleaning algorithm starts to remove expired and/or least-recently used RRsets from the cache, to keep memory use below the configured limit. It has been discovered that the effectiveness of the cache-cleaning algorithm used in `named` can be severely diminished by querying the resolver for specific RRsets in a certain order, effectively allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.11.0 through 9.16.41, 9.18.0 through 9.18.15, 9.19.0 through 9.19.13, 9.11.3-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1.

A segmentation fault flaw was found in the Advancecomp package. This may lead to decreased availability.