Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: net: mana: Guard mana_remove against double invocation If PM resume fails (e.g., mana_attach() returns an error), mana_probe() calls mana_remove(), which tears down the device and sets gd->gdma_context = NULL and gd->driver_data = NULL. However, a failed resume callback does not automatically unbind the driver. When the device is eventually unbound, mana_remove() is invoked a second time. Without a NULL check, it dereferences gc->dev with gc == NULL, causing a kernel panic. Add an early return if gdma_context or driver_data is NULL so the second invocation is harmless. Move the dev = gc->dev assignment after the guard so it cannot dereference NULL.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: free channels on probe error On probe error, free the previously obtained channels. This not only prevents a leak, but also UAF scenarios because the client structure will be removed nonetheless because it was allocated with devm.

In the Linux kernel, the following vulnerability has been resolved: mailbox: add sanity check for channel array Fail gracefully if there is no channel array attached to the mailbox controller. Otherwise the later dereference will cause an OOPS which might not be seen because mailbox controllers might instantiate very early. Remove the comment explaining the obvious while here.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG There were multiple issues in that code. First of all the order between the reset semaphore and the mm_lock was wrong (e.g. copy_to_user) was called while holding the lock. Then we allocated memory while holding the reset semaphore which is also a pretty big bug and can deadlock. Then we used down_read_trylock() instead of waiting for the reset to finish. (cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e)

In the Linux kernel, the following vulnerability has been resolved: net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via pn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ... pn_socket_autobind() calls pn_socket_bind() with port 0 and, on -EINVAL, assumes the socket was already bound and asserts that the port is non-zero: err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn)); if (err != -EINVAL) return err; BUG_ON(!pn_port(pn_sk(sock->sk)->sobject)); return 0; /* socket was already bound */ However pn_socket_bind() also returns -EINVAL when sk->sk_state is not TCP_CLOSE, even when the socket has never been bound and pn_port() is still 0. In that case the BUG_ON() fires and panics the kernel from a user-triggerable path. Treat the "bind returned -EINVAL but pn_port() is still 0" case as a regular error and propagate -EINVAL to the caller instead of crashing. Existing callers already translate a non-zero return from pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here only changes behaviour from panic to a normal errno.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/conexant: Fix missing error check for jack detection In cx_probe(), the return value of snd_hda_jack_detect_enable_callback() is ignored. This function returns a pointer, and if it fails (e.g., due to memory allocation failure), it returns an error pointer which must be checked using IS_ERR(). If the registration fails, the driver continues to probe, but the jack detection callback will not be registered. This can lead to a kernel crash later when the driver attempts to handle jack events or accesses the uninitialized structure. Check the return value using IS_ERR() and propagate the error via PTR_ERR() to the probe caller.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/eustall: Fix drm_dev_put called before stream disable in close In xe_eu_stall_stream_close(), drm_dev_put() is called before the stream is disabled and its resources are freed. If this drops the last reference, the device structures could be freed while the subsequent cleanup code still accesses them, leading to a use-after-free. Fix this by moving drm_dev_put() after all device accesses are complete. This matches the ordering in xe_oa_release(). (cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c)

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_reset_all_vfs() ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfig_vsi() and skipping ice_vf_post_vsi_rebuild() on failure. Apply the same pattern to ice_reset_all_vfs(): check the return value of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and ice_eswitch_attach_vf() on failure. The VF is left safely disabled (ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can be recovered via a VFLR triggered by a PCI reset of the VF (sysfs reset or driver rebind). Note that this patch does not prevent the VF VSI rebuild from failing during NVM update — the underlying cause is firmware being in a transitional state while the EMP reset is processed, which can cause Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This patch only prevents the subsequent NULL pointer dereference that crashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arm64: Reserve an extra page for early kernel mapping The final part of [data, end) segment may overflow into the next page of init_pg_end[1] which is the gap page before early_init_stack[2]: [1] crash_arm64_v9.0.1> vtop ffffffed00601000 VIRTUAL PHYSICAL ffffffed00601000 83401000 PAGE DIRECTORY: ffffffecffd62000 PGD: ffffffecffd62da0 => 10000000833fb003 PMD: ffffff80033fb018 => 10000000833fe003 PTE: ffffff80033fe008 => 68000083401f03 PAGE: 83401000 PTE PHYSICAL FLAGS 68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN) PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffffffec00d0040 83401000 0 0 1 4000 reserved [2] ffffffed002c8000 (r) __pi__data ffffffed0054e000 (d) __pi___bss_start ffffffed005f5000 (b) __pi_init_pg_dir ffffffed005fe000 (b) __pi_init_pg_end ffffffed005ff000 (B) early_init_stack ffffffed00608000 (b) __pi__end For 4K pages, the early kernel mapping may use 2MB block entries but the kernel segments are only 64KB aligned. Segment boundaries that fall within a 2MB block therefore require a PTE table so that different attributes can be applied on either side of the boundary. KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel VMAs registered by declare_kernel_vmas(). However, since commit 5973a62efa34 ("arm64: map [_text, _stext) virtual address range non-executable+read-only"), the early mapper also maps [_text, _stext) separately from [_stext, _etext). This adds one more early-only split and can require one more page-table page than the existing EARLY_SEGMENT_EXTRA_PAGES allowance reserves. Increase the 4K-page early mapping allowance by one page to cover that additional split. [catalin.marinas@arm.com: rewrote part of the commit log] [catalin.marinas@arm.com: expanded the code comment]

In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduction of CAPSET audit records in 2008.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix double free and use-after-free in aux device error paths When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or idpf_plug_core_aux_dev(), the err_aux_dev_add label calls auxiliary_device_uninit() and falls through to err_aux_dev_init. The uninit call will trigger put_device(), which invokes the release callback (idpf_vport_adev_release / idpf_core_adev_release) that frees iadev. The fall-through then reads adev->id from the freed iadev for ida_free() and double-frees iadev with kfree(). Free the IDA slot and clear the back-pointer before uninit, while adev is still valid, then return immediately. Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization") fixed the same use-after-free in the matching unplug path in this file but missed both probe error paths.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11)

In the Linux kernel, the following vulnerability has been resolved: btrfs: only release the dirty pages io tree after successful writes [WARNING] With extra warning on dirty extent buffers at umount (aka, the next patch in the series), test case generic/388 can trigger the following warning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem BTRFS info (device dm-2 state EA): forced readonly BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c ------------[ cut here ]------------ WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368 CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs] Call Trace: <TASK> close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] generic_shutdown_super+0x89/0x1a0 kill_anon_super+0x16/0x40 btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] deactivate_locked_super+0x2d/0xb0 cleanup_mnt+0xdc/0x140 task_work_run+0x5a/0xa0 exit_to_user_mode_loop+0x123/0x4b0 do_syscall_64+0x243/0x7c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7 I'm using a stripped down version, which seems to trigger the warning more reliably: _fsstress_pid="" workload() { dmesg -C mkfs.btrfs -f -K $dev > /dev/null echo 1 > /sys/kernel/debug/clear_warn_once mount $dev $mnt $fsstress -w -n 1024 -p 4 -d $mnt & _fsstress_pid=$! sleep 0 $godown $mnt pkill --echo -PIPE fsstress > /dev/null wait $_fsstress_pid unset _fsstress_pid umount $mnt if dmesg | grep -q "WARNING"; then fail fi } for (( i = 0; i < $runtime; i++ )); do echo "=== $i/$runtime ===" workload done [CAUSE] Inside btrfs_write_and_wait_transaction(), we first try to write all dirty ebs, then wait for them to finish. After that we call btrfs_extent_io_tree_release() to free all extent states from dirty_pages io tree. However if we hit an error from btrfs_write_marked_extent(), then we still call btrfs_extent_io_tree_release() to clear that dirty_pages io tree, which may contain dirty records that we haven't yet submitted. Furthermore, the later transaction cleanup path will utilize that dirty_pages io tree to properly cleanup those dirty ebs, but since it's already empty, no dirty ebs are properly cleaned up, thus will later trigger the warnings inside invalidate_btree_folios(). ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bounds-check devid in __rlookup_amd_iommu() iommu_device_register() walks every device on the PCI bus via bus_for_each_dev() and calls amd_iommu_probe_device() for each. The inlined check_device() path computes the device's sbdf, calls rlookup_amd_iommu() to find the owning IOMMU, and only afterwards verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes rlookup_table[devid] with no bounds check of its own, so for a PCI device whose BDF is not described by the IVRS, the lookup reads past the end of the allocation before the caller's bounds check can run. This was harmless before commit e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()"): the table was a zeroed page-order allocation, so the over-read returned NULL and the caller's NULL check skipped the device. After that commit the table is a tight kvcalloc() and the over-read returns adjacent slab contents, which check_device() then dereferences as a struct amd_iommu *, causing a boot-time GPF. Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at 00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation, into the adjacent kmalloc-512 slab object: pci 0000:00:04.0: Adding to iommu group 0 pci 0000:00:05.0: Adding to iommu group 1 pci 0000:00:06.0: Adding to iommu group 2 pci 0000:00:07.0: Adding to iommu group 3 Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025 RIP: 0010:amd_iommu_probe_device+0x54/0x3a0 Call Trace: __iommu_probe_device+0x107/0x520 probe_iommu_group+0x29/0x50 bus_for_each_dev+0x7e/0xe0 iommu_device_register+0xc9/0x240 iommu_go_to_state+0x9c0/0x1c60 amd_iommu_init+0x14/0x40 pci_iommu_init+0x16/0x60 do_one_initcall+0x47/0x2f0 Guard the array access in __rlookup_amd_iommu(). With the fix applied on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Push kjump return address even for non-kjump kexec The version of purgatory code shipped by kexec-tools attempts to look above the top of its stack to find a return address for a kjump, even in a non-kjump kexec. After the commit in Fixes: the word above the stack might not be there, leading to a fault (which is at least now caught by my exception-handling code in kexec). That commit fixed things for the actual kjump path, but no longer "gratuitously" pushes the unused return address to the stack in the non-kjump path. Put that *back* in the non-kjump path, to prevent purgatory from crashing when trying to access it.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid NULL pointer dereference or refcount corruption Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") fixed a NULL pointer dereference in an unlikely situation partly. If dev_pasid is not found in the dev_pasids list, it remains NULL. However, the teardown operations are executed unconditionally, this lead to a NULL pointer dereference or refcount corruption. If the domain was never attached to this IOMMU, info will be NULL, which would cause an immediate dereference when checking --info->refcnt. Even if info is not NULL, decrementing the refcount without having removed a valid PASID might unbalance the count. This could lead to premature dropping of the refcount to 0, potentially causing a use-after-free for the remaining active devices sharing the domain. Fix it by returning early if dev_pasid is NULL, before executing the teardown operations. Issue found by AI review and suggested by Kevin Tian. https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done() Local sashiko review pointed it out that group->domain could be NULL when a default domain fails to allocate during the first probe, which can crash at domain->ops->attach_dev dereference in __iommu_attach_device() invoked by pci_dev_reset_iommu_done(). pci_dev_reset_iommu_prepare() is fine as an old_domain pointer can be NULL. Skip the re-attach in pci_dev_reset_iommu_done() to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: drm/gma500/oaktrail_lvds: fix hang on init failure The LVDS init code looks up an I2C adapter using i2c_get_adapter() and tries to read the EDID before falling back to allocating and registering its own adapter. The error handling does not separate these cases so on a late init failure it will try to deregister and free also an adapter that had previously been registered. Since i2c_get_adapter() takes another reference to the adapter, deregistration hangs indefinitely while waiting for the reference to be released. Fix this by only destroying adapters allocated during LVDS init on errors.

In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Check whether the config array is allocated before destroying it __destroy_component_cfg() is called to free the configuration array. It uses the embedded 'garbage' structure, which means the array has to be allocated. If __destroy_component_cfg() is called from mpam_disable() before the configuration was ever allocated, then a NULL pointer is dereferenced. Check for this case and return early if the configuration is not allocated. __destroy_component_cfg() also frees the mbwu_state as this is allocated by __allocate_component_cfg(). As the mbwu_state is allocated after comp->cfg is set, and is also under mpam_list_lock, only the first pointer needs checking.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation walk_s1() and kvm_walk_nested_s2() expect to be called while holding kvm->srcu to guard against memslot changes. While this is generally the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the respective walkers without taking kvm->srcu. Fix by acquiring kvm->srcu prior to the table walk in both instances.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is dropped: bis = iso_pi(sk)->conn->hcon; /* Release the socket before lookups since that requires hci_dev_lock * which shall not be acquired while holding sock_lock for proper * ordering. */ release_sock(sk); hci_dev_lock(bis->hdev); During the unlocked window, could a concurrent close() destroy the connection and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory after it is freed, fix this by using the hdev reference which was safely acquired via iso_conn_get_hdev().

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix use-after-free when processing MLD queries When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118 Workqueue: mld mld_query_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_address_description.constprop.0 (mm/kasan/report.c:378) print_report (mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) __mld_query_work (net/ipv6/mcast.c:1512) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> [...] Freed by task 118: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566) pskb_expand_head (net/core/skbuff.c:2335) __pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4)) __mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1)) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245)

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS A logic flaw in __smc_setsockopt() allows a local unprivileged user to cause a Denial of Service (DoS) by holding the socket lock indefinitely. The function __smc_setsockopt() calls copy_from_sockptr() while holding lock_sock(sk). By passing a userfaultfd-monitored memory page (or FUSE-backed memory on systems where unprivileged userfaultfd is disabled) as the optval, an attacker can halt execution during the copy operation, keeping the lock held. Combined with asynchronous tear-down operations like shutdown(), this exhausts the kernel wq (kworkers) and triggers the hung task watchdog. [ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds. [ 240.123489] Call Trace: [ 240.123501] smc_shutdown+... [ 240.123512] lock_sock_nested+... This patch moves the user-space copy outside the lock_sock() critical section to prevent the issue.

In the Linux kernel, the following vulnerability has been resolved: tee: optee: prevent use-after-free when the client exits before the supplicant Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the client wait as killable so it can be interrupted during shutdown or after a supplicant crash. This changes the original lifetime expectations: the client task can now terminate while the supplicant is still processing its request. If the client exits first it removes the request from its queue and kfree()s it, while the request ID remains in supp->idr. A subsequent lookup on the supplicant path then dereferences freed memory, leading to a use-after-free. Serialise access to the request with supp->mutex: * Hold supp->mutex in optee_supp_recv() and optee_supp_send() while looking up and touching the request. * Let optee_supp_thrd_req() notice that the client has terminated and signal optee_supp_send() accordingly. With these changes the request cannot be freed while the supplicant still has a reference, eliminating the race.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix use-after-free on sbi->sync_decompress z_erofs_decompress_kickoff() can race with filesystem unmount, causing a use-after-free on sbi->sync_decompress. When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff() to queue z_erofs_decompressqueue_work() asynchronously. Then, after all folios are unlocked, unmount workflow can proceed and sbi will be freed before accessing to sbi->sync_decompress. Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked) cleanup_mnt .. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!!

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn into a local with neither READ_ONCE() nor a NULL check. Both run from oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then writes through NULL at offset 0xc4 -- a remotely triggerable oops. Guard both reads the way compare_guid_key() already does: read opinfo->conn with READ_ONCE() and return early if it is NULL, before allocating the work struct so nothing leaks. A NULL conn means the client is gone and the break is moot, so return 0; oplock_break() treats that as success and runs the normal teardown.

In the Linux kernel, the following vulnerability has been resolved: ipvs: clear the svc scheduler ptr early on edit ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error code.

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY.

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack_irc: fix possible out-of-bounds read When parsing fails after we've matched the command string we should bail out instead of trying to match a different command. This helper should be deprecated, given prevalence of TLS I doubt it has any relevance in 2026.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits().

In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: check allocation under invalidate lock commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks") added mq->lock around the destructive part of smq_invalidate_mapping(), but left the e->allocated check outside the critical section. That leaves a check-then-act race. Two concurrent invalidators can both observe e->allocated as true before either of them takes mq->lock. The first invalidator that acquires the lock removes the entry from the queues and hash table and then calls free_entry(), which clears e->allocated and puts the entry back on the free list. The second invalidator can then acquire mq->lock and continue with the stale result of the unlocked check. This can corrupt the SMQ queues or hash table by deleting an entry that is no longer on those structures. It can also hit the allocation check in free_entry() when the same entry is freed again. Move the allocation check under mq->lock so the predicate and the destructive operations are serialized by the same lock.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: use RCU with deferred freeing for action lifecycle When NEWTFILTER and DELFILTER are run concurrently it is possible to create a race with an associated action. Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory This patch fixes the race condition between NEWTFILTER and DELFILTER by adding struct rcu_head to tc_action used in the deferral and introducing a call_rcu() in the delete path to defer the final kfree(). Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") but also modernization/simplification to directly use kfree_rcu(). Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace period After CPU1 calls idr_remove(), the object is no longer reachable through the IDR. CPU0's subsequent idr_find() will return NULL, and even if it still held a stale pointer, the immediate kfree() is now deferred until after the RCU grace period, so no UAF can occur.

In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future.

In the Linux kernel, the following vulnerability has been resolved: l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl() pppol2tp_ioctl() read sock->sk->sk_user_data directly without any locks or reference counting. If a controllable sleep was induced during copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent socket close could trigger pppol2tp_session_close() asynchronously. This frees the l2tp_session structure via the l2tp_session_del_work workqueue. Upon resuming, the ioctl thread dereferences the stale session pointer, resulting in a Use-After-Free (UAF). Fix this by securely fetching the session reference using the RCU-safe, refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the session's refcount across the sleep. We structured the function to exit via standard err breaks, guaranteeing that l2tp_session_put() is cleanly called on all return paths to drop the reference. To preserve existing behavior we validate the session and its magic signature only for the specific L2TP commands that require it. This ensures that generic/unknown ioctls called on an unconnected socket still return -ENOIOCTLCMD and correctly fall back to generic handlers (e.g. in sock_do_ioctl()).

In the Linux kernel, the following vulnerability has been resolved: devlink: Release nested relation on devlink free devlink relation state is normally released from devl_unregister(), which calls devlink_rel_put(). This misses devlink instances that get a nested relation before registration and then fail probe before devl_register() is reached. That flow can happen for SFs. The child devlink gets linked to its parent before registration, then a later probe error calls devlink_free() directly. Since the instance was never registered, devl_unregister() is not called and devlink->rel is leaked. Release any pending relation from devlink_free() as well. The registered path is unchanged because devl_unregister() already clears devlink->rel before devlink_free() runs.

In the Linux kernel, the following vulnerability has been resolved: tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req(). syzbot reported a weird reqsk->rsk_refcnt underflow in __inet_csk_reqsk_queue_drop(). The captured reqsk_put() in __inet_csk_reqsk_queue_drop() is called only when it successfully removes reqsk from ehash. Moreover, reqsk_timer_handler() calls another reqsk_put() after that. This indicates that the reqsk was missing both refcnts for ehash and the timer itself. Since all the syzbot reports had PREEMPT_RT enabled, the only possible scenario is that reqsk_queue_hash_req() is preempted after mod_timer() and before refcount_set(), and then the timer triggered after 1s aborts the reqsk due to its listener's close(). Let's wrap mod_timer() and refcount_set() with preempt_disable_nested() and preempt_enable_nested(). Note that inet_ehash_insert() holds the normal spin_lock() (mutex in PREEMPT_RT), so it must be called outside of preempt_disable_nested(), but this is fine. The lookup path just ignores 0 sk_refcnt entries in ehash and tries to create another reqsk, but this will fail at inet_ehash_insert(). [0]: refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28 Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f RSP: 0000:ffffc90000157948 EFLAGS: 00010246 RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00 RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568 R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_sub_and_test include/linux/refcount.h:400 [inline] __refcount_dec_and_test include/linux/refcount.h:432 [inline] refcount_dec_and_test include/linux/refcount.h:450 [inline] reqsk_put include/net/request_sock.h:136 [inline] __inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007 reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137 call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748 expire_timers kernel/time/timer.c:1799 [inline] __run_timers kernel/time/timer.c:2374 [inline] __run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386 run_timer_base kernel/time/timer.c:2395 [inline] run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403 handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0x69/0x100 kernel/softirq.c:1151 smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ipv6: anycast: insert aca into global hash under idev->lock syzbot reported a splat [1]: a slab-use-after-free in ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash under RCU and dereferences a struct ifacaddr6 that has already been freed while still linked in the hash, so a later reader walks into a dangling node. In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then aca_get() bumps it to 2 to keep it alive across the unlocked region. It is published to idev->ac_list under idev->lock, but ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL) can slip into that window: CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL) ------------------------------ ------------------------------------ aca_alloc() refcnt 1 aca_get() refcnt 2 write_lock_bh(idev->lock) add aca to ac_list write_unlock_bh(idev->lock) write_lock_bh(idev->lock) pull aca off ac_list write_unlock_bh(idev->lock) ipv6_del_acaddr_hash(aca) hlist_del_init_rcu() is a no-op, aca is not in the hash yet aca_put() refcnt 2->1 ipv6_add_acaddr_hash(aca) aca now inserted into the hash aca_put() refcnt 1->0 call_rcu(aca_free_rcu) -> kfree(aca) The hash removal becomes a no-op because the insertion has not happened yet, so once CPU0 inserts and drops the last reference, the aca is freed while still linked in inet6_acaddr_lst[], and readers dereference freed memory after the slab slot is reused. This window opened once RTNL stopped serializing the join path against device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock section so the ac_list and hash insertions are atomic with respect to teardown: a racing remover now either misses the aca entirely or finds it in both lists. acaddr_hash_lock is now nested under idev->lock, which is acquired in softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh() to avoid the irq lock inversion reported in [2]. [1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a [2] https://lore.kernel.org/netdev/6a194ef7.ba3b1513.1890b4.0000.GAE@google.com/

In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: enforce HE/EHT cap/oper consistency Xiang Mei reports that mac80211 could crash if eht_cap is set but eht_oper isn't. Rather than fixing that for the individual user(s), enforce that both HE/EHT have consistent elements.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate advertising TLV before type checks tlv_data_is_valid() reads each advertising data field length from data[i], then inspects data[i + 1] for managed EIR types before checking that the current field still fits inside the supplied buffer. A malformed field whose length byte is the last byte of the buffer can therefore make the parser read one byte past the advertising data. KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING request reached that path: BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid() Read of size 1 Call trace: tlv_data_is_valid() add_advertising() hci_mgmt_cmd() hci_sock_sendmsg() Move the existing element-length check before any type-octet inspection so each non-empty element is proven to contain its type byte before the parser looks at data[i + 1].

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in MCC handlers The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: reject short frames before parsing A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload. Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads. For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the setup payload. struct bnep_setup_conn_req carries destination and source service UUIDs after that byte, each uuid_size bytes, so the parser now documents that tuple explicitly instead of leaving the pull length as an opaque multiplication. Validation reproduced this kernel report: KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790 The buggy address belongs to the object at ffff88800c0f7908 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 1-byte region [ffff88800c0f7908, ffff88800c0f7909) Read of size 1 Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync hci_get_route() returns a reference-counted hci_dev pointer via hci_dev_hold(). The function exits normally or with an error without ever releasing it.

In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees.

In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix use-after-free in metadata dst teardown airoha_metadata_dst_free() runs metadata_dst_free() which frees the metadata_dst with kfree() immediately, bypassing the RCU grace period. In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from the skb to the metadata_dst. This function requires RCU read-side protection and the dst must remain valid until all RCU readers complete. Since metadata_dst_free() calls kfree() directly, an use-after-free can occur if any skb still holds a noref pointer to the dst when the driver tears it down. Replace metadata_dst_free() with dst_release() which properly goes through the refcount path: when the refcount drops to zero, it schedules the actual free via call_rcu_hurry(), ensuring all RCU readers have completed before the memory is freed.