Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free by using call_rcu() for oplock_info ksmbd currently frees oplock_info immediately using kfree(), even though it is accessed under RCU read-side critical sections in places like opinfo_get() and proc_show_files(). Since there is no RCU grace period delay between nullifying the pointer and freeing the memory, a reader can still access oplock_info structure after it has been freed. This can leads to a use-after-free especially in opinfo_get() where atomic_inc_not_zero() is called on already freed memory. Fix this by switching to deferred freeing using call_rcu().

In the Linux kernel, the following vulnerability has been resolved: net: mctp: fix device leak on probe failure Driver core holds a reference to the USB interface and its parent USB device while the interface is bound to a driver and there is no need to take additional references unless the structures are needed after disconnect. This driver takes a reference to the USB device during probe but does not to release it on probe failures. Drop the redundant device reference to fix the leak, reduce cargo culting, make it easier to spot drivers where an extra reference is needed, and reduce the risk of further memory leaks.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed.

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Fix error path in PTP IRQ setup If request_threaded_irq() fails during the PTP message IRQ setup, the newly created IRQ mapping is never disposed. Indeed, the ksz_ptp_irq_setup()'s error path only frees the mappings that were successfully set up. Dispose the newly created mapping if the associated request_threaded_irq() fails at setup.

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix NULL pointer dereference in device cleanup When GPU initialization fails due to an unsupported HW block IP blocks may have a NULL version pointer. During cleanup in amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and amdgpu_device_set_cg_state which iterate over all IP blocks and access adev->ip_blocks[i].version without NULL checks, leading to a kernel NULL pointer dereference. Add NULL checks for adev->ip_blocks[i].version in both amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent dereferencing NULL pointers during GPU teardown when initialization has failed. (cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2)

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] <TASK> [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60)

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix a few more NULL pointer dereference in device cleanup I found a few more paths that cleanup fails due to a NULL version pointer on unsupported hardware. Add NULL checks as applicable. (cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2)

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.

In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport.

In the Linux kernel, the following vulnerability has been resolved: ublk: fix NULL pointer dereference in ublk_ctrl_set_size() ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via set_capacity_and_notify() without checking if it is NULL. ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs (ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE handler performs no state validation, a user can trigger a NULL pointer dereference by sending UPDATE_SIZE to a device that has been added but not yet started, or one that has been stopped. Fix this by checking ub->ub_disk under ub->mutex before dereferencing it, and returning -ENODEV if the disk is not available.

In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort when snapshotting received subvolumes Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesystem into RO mode and disrupt a system. Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNT When running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system And in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] <TASK> [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on file creation due to name hash collision If we attempt to create several files with names that result in the same hash, we have to pack them in same dir item and that has a limit inherent to the leaf size. However if we reach that limit, we trigger a transaction abort and turns the filesystem into RO mode. This allows for a malicious user to disrupt a system, without the need to have administration privileges/capabilities. Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon.

In the Linux kernel, the following vulnerability has been resolved: btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer() Call rcu_read_lock() before exiting the loop in try_release_subpage_extent_buffer() because there is a rcu_read_unlock() call past the loop. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case.

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.

In the Linux kernel, the following vulnerability has been resolved: iio: proximity: hx9023s: Protect against division by zero in set_samp_freq Avoid division by zero when sampling frequency is unspecified.

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in DMA ring dequeue The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for multiple transfers that timeout around the same time. However, the function is not serialized and can race with itself. When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes incomplete transfers, and then restarts the ring. If another timeout triggers a parallel call into the same function, the two instances may interfere with each other - stopping or restarting the ring at unexpected times. Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to itself.

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue The logic used to abort the DMA ring contains several flaws: 1. The driver unconditionally issues a ring abort even when the ring has already stopped. 2. The completion used to wait for abort completion is never re-initialized, resulting in incorrect wait behavior. 3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which resets hardware ring pointers and disrupts the controller state. 4. If the ring is already stopped, the abort operation should be considered successful without attempting further action. Fix the abort handling by checking whether the ring is running before issuing an abort, re-initializing the completion when needed, ensuring that RING_CTRL_ENABLE remains asserted during abort, and treating an already stopped ring as a successful condition.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Eagerly init vgic dist/redist on vgic creation If vgic_allocate_private_irqs_locked() fails for any odd reason, we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised. kvm_vgic_dist_destroy() then comes along and walks into the weeds trying to free the RDs. Got to love this stuff. Solve it by moving all the static initialisation early, and make sure that if we fail halfway, we're in a reasonable shape to perform the rest of the teardown. While at it, reset the vgic model on failure, just in case...

In the Linux kernel, the following vulnerability has been resolved: smb: client: require a full NFS mode SID before reading mode bits parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS mode SID and reads sid.sub_auth[2] to recover the mode bits. That assumes the ACE carries three subauthorities, but compare_sids() only compares min(a, b) subauthorities. A malicious server can return an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still matches sid_unix_NFS_mode and then drives the sub_auth[2] read four bytes past the end of the ACE. Require num_subauth >= 3 before treating the ACE as an NFS mode SID. This keeps the fix local to the special-SID mode path without changing compare_sids() semantics for the rest of cifsacl.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer syzbot reported a f2fs bug as below: BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520 f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520 f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177 f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1 bio_endio+0x1006/0x1160 block/bio.c:1792 submit_bio_noacct+0x533/0x2960 block/blk-core.c:891 submit_bio+0x57a/0x620 block/blk-core.c:926 blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline] f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557 f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775 read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481 __get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576 f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623 do_read_inode fs/f2fs/inode.c:425 [inline] f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596 f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184 get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694 get_tree_bdev+0x38/0x50 fs/super.c:1717 f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436 vfs_get_tree+0xb3/0x5d0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3763 [inline] do_new_mount+0x885/0x1dd0 fs/namespace.c:3839 path_mount+0x7a2/0x20b0 fs/namespace.c:4159 do_mount fs/namespace.c:4172 [inline] __do_sys_mount fs/namespace.c:4361 [inline] __se_sys_mount+0x704/0x7f0 fs/namespace.c:4338 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4338 x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is: in f2fs_finish_read_bio(), we may access uninit data in folio if we failed to read the data from device into folio, let's add a check condition to avoid such issue.

In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel computes pgmap->vmemmap_shift as the number of trailing zeros in the OR of start_pfn and last_pfn, intending to use the largest compound page order both endpoints are aligned to. However, this value is not clamped to MAX_FOLIO_ORDER, so a sufficiently aligned range (e.g. physical range [0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000 with 35 trailing zeros) can produce a shift larger than what memremap_pages() accepts, triggering a WARN and returning -EINVAL: WARNING: ... memremap_pages+0x512/0x650 requested folio size unsupported The MAX_FOLIO_ORDER check was added by commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound page sizes in memremap_pages()"). Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always request the largest order the kernel supports, in those cases, rather than an out-of-range value. Also fix the error path to propagate the actual error code from devm_memremap_pages() instead of hard-coding -EFAULT, which was masking the real -EINVAL return.

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: monaco: Reserve full Gunyah metadata region We observe spurious "Synchronous External Abort" exceptions (ESR=0x96000010) and kernel crashes on Monaco-based platforms. These faults are caused by the kernel inadvertently accessing hypervisor-owned memory that is not properly marked as reserved. >From boot log, The Qualcomm hypervisor reports the memory range at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned: qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0 However, the EFI memory map provided by firmware only reserves the subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion (0x91a88000–0x91afffff) is incorrectly reported as conventional memory (from efi debug): efi: 0x000091a40000-0x000091a87fff [Reserved...] efi: 0x000091a88000-0x0000938fffff [Conventional...] As a result, the allocator may hand out PFNs inside the hypervisor owned region, causing fatal aborts when the kernel accesses those addresses. Add a reserved-memory carveout for the Gunyah hypervisor metadata at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not map or allocate from this area. For the record: Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC) UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1

In the Linux kernel, the following vulnerability has been resolved: ice: ptp: don't WARN when controlling PF is unavailable In VFIO passthrough setups, it is possible to pass through only a PF which doesn't own the source timer. In that case the PTP controlling PF (adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp() returns NULL and triggers WARN_ON() in ice_ptp_setup_pf(). Since this is an expected behavior in that configuration, replace WARN_ON() with an informational message and return -EOPNOTSUPP.

In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix event ring index not programmed for IPA v5.0+ For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to CH_C_CNTXT_1. The v5.0 register definition intended to define this field in the CH_C_CNTXT_1 fmask array but used the old identifier of ERINDEX instead of CH_ERINDEX. Without a valid event ring, GSI channels could never signal transfer completions. This caused gsi_channel_trans_quiesce() to block forever in wait_for_completion(). At least for IPA v5.2 this resolves an issue seen where runtime suspend, system suspend, and remoteproc stop all hanged forever. It also meant the IPA data path was completely non functional.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length.

In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before calling the low-level driver's `attach` function pointer if `CONFIG_LOCKDEP` is enabled.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection.

In the Linux kernel, the following vulnerability has been resolved: btrfs: reserve enough transaction items for qgroup ioctls Currently our qgroup ioctls don't reserve any space, they just do a transaction join, which does not reserve any space, neither for the quota tree updates nor for the delayed refs generated when updating the quota tree. The quota root uses the global block reserve, which is fine most of the time since we don't expect a lot of updates to the quota root, or to be too close to -ENOSPC such that other critical metadata updates need to resort to the global reserve. However this is not optimal, as not reserving proper space may result in a transaction abort due to not reserving space for delayed refs and then abusing the use of the global block reserve. For example, the following reproducer (which is unlikely to model any real world use case, but just to illustrate the problem), triggers such a transaction abort due to -ENOSPC when running delayed refs: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 umount $DEV &> /dev/null # Limit device to 1G so that it's much faster to reproduce the issue. mkfs.btrfs -f -b 1G $DEV mount -o commit=600 $DEV $MNT fallocate -l 800M $MNT/filler btrfs quota enable $MNT for ((i = 1; i <= 400000; i++)); do btrfs qgroup create 1/$i $MNT done umount $MNT When running this, we can see in dmesg/syslog that a transaction abort happened: [436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28 [436.493] ------------[ cut here ]------------ [436.494] BTRFS: Transaction aborted (error -28) [436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372 [436.497] Modules linked in: btrfs loop (...) [436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [436.510] Tainted: [W]=WARN [436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs] [436.514] Code: 0f 82 ea (...) [436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292 [436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001 [436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80 [436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867 [436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400 [436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000 [436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000 [436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0 [436.530] Call Trace: [436.530] <TASK> [436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs] [436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs] [436.532] sync_filesystem+0x7a/0x90 [436.533] generic_shutdown_super+0x28/0x180 [436.533] kill_anon_super+0x12/0x40 [436.534] btrfs_kill_super+0x12/0x20 [btrfs] [436.534] deactivate_locked_super+0x2f/0xb0 [436.534] cleanup_mnt+0xea/0x180 [436.535] task_work_run+0x58/0xa0 [436.535] exit_to_user_mode_loop+0xed/0x480 [436.536] ? __x64_sys_umount+0x68/0x80 [436.536] do_syscall_64+0x2a5/0xf20 [436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e [436.537] RIP: 0033:0x7fe5906b6217 [436.538] Code: 0d 00 f7 (...) [436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217 [436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100 [436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff [436.544] R10: 0000000000000103 R11: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw() dcn401_init_hw() assumes that update_bw_bounding_box() is valid when entering the update path. However, the existing condition: ((!fams2_enable && update_bw_bounding_box) || freq_changed) does not guarantee this, as the freq_changed branch can evaluate to true independently of the callback pointer. This can result in calling update_bw_bounding_box() when it is NULL. Fix this by separating the update condition from the pointer checks and ensuring the callback, dc->clk_mgr, and bw_params are validated before use. Fixes the below: ../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362) (cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477)

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: chacha: Zeroize permuted_state before it leaves scope Since the ChaCha permutation is invertible, the local variable 'permuted_state' is sufficient to compute the original 'state', and thus the key, even after the permutation has been done. While the kernel is quite inconsistent about zeroizing secrets on the stack (and some prominent userspace crypto libraries don't bother at all since it's not guaranteed to work anyway), the kernel does try to do it as a best practice, especially in cases involving the RNG. Thus, explicitly zeroize 'permuted_state' before it goes out of scope.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes() The change to dynamic IDs for SM8450 platform interconnects left two links unconverted, fix it to avoid the NULL pointer dereference in runtime, when a pointer to a destination interconnect is not valid: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <...> Call trace: icc_link_nodes+0x3c/0x100 (P) qcom_icc_rpmh_probe+0x1b4/0x528 platform_probe+0x64/0xc0 really_probe+0xc4/0x2a8 __driver_probe_device+0x80/0x140 driver_probe_device+0x48/0x170 __device_attach_driver+0xc0/0x148 bus_for_each_drv+0x88/0xf0 __device_attach+0xb0/0x1c0 device_initial_probe+0x58/0x68 bus_probe_device+0x40/0xb8 deferred_probe_work_func+0x90/0xd0 process_one_work+0x15c/0x3c0 worker_thread+0x2e8/0x400 kthread+0x150/0x208 ret_from_fork+0x10/0x20 Code: 900310f4 911d6294 91008280 94176078 (f94002a0) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned.

In the Linux kernel, the following vulnerability has been resolved: bpf: reject direct access to nullable PTR_TO_BUF pointers check_mem_access() matches PTR_TO_BUF via base_type() which strips PTR_MAYBE_NULL, allowing direct dereference without a null check. Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL. On stop callbacks these are NULL, causing a kernel NULL dereference. Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the existing PTR_TO_BTF_ID pattern.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The load_segments() function changes segment registers, invalidating GS base (which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins crashing the kernel in an endless loop. To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented kernel: $ kexec -l /boot/otherKernel $ kexec -e The real-world context for this problem is enabling crash dump collection in syzkaller. For this, the tool loads a panic kernel before fuzzing and then calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC and CONFIG_KCOV to be enabled simultaneously. Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc()) is also undesirable as it would introduce an extra performance overhead. Disabling instrumentation for the individual functions would be too fragile, so disable KCOV instrumentation for the entire machine_kexec_64.c and physaddr.c. If coverage-guided fuzzing ever needs these components in the future, other approaches should be considered. The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported there. [ bp: Space out comment for better readability. ]

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The copying is performed using kmemdup, however this leads to an overflow: reading more bytes (aligned_len - keylen) from the keylen source buffer. Fix this by replacing kmemdup with kmalloc, followed by memcpy.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release().

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again.