Linux vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned.

In the Linux kernel, the following vulnerability has been resolved: perf: Avoid undefined behavior from stopping/starting inactive events Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can leave event->hw.idx at -1. When PMU drivers later attempt to use this negative index as a shift exponent in bitwise operations, it leads to UBSAN shift-out-of-bounds reports. The issue is a logical flaw in how event groups handle throttling when some members are intentionally disabled. Based on the analysis and the reproducer provided by Mark Rutland (this issue on both arm64 and x86-64). The scenario unfolds as follows: 1. A group leader event is configured with a very aggressive sampling period (e.g., sample_period = 1). This causes frequent interrupts and triggers the throttling mechanism. 2. A child event in the same group is created in a disabled state (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF. Since it hasn't been scheduled onto the PMU, its event->hw.idx remains initialized at -1. 3. When throttling occurs, perf_event_throttle_group() and later perf_event_unthrottle_group() iterate through all siblings, including the disabled child event. 4. perf_event_throttle()/unthrottle() are called on this inactive child event, which then call event->pmu->start()/stop(). 5. The PMU driver receives the event with hw.idx == -1 and attempts to use it as a shift exponent. e.g., in macros like PMCNTENSET(idx), leading to the UBSAN report. The throttling mechanism attempts to start/stop events that are not actively scheduled on the hardware. Move the state check into perf_event_throttle()/perf_event_unthrottle() so that inactive events are skipped entirely. This ensures only active events with a valid hw.idx are processed, preventing undefined behavior and silencing UBSAN warnings. The corrected check ensures true before proceeding with PMU operations. The problem can be reproduced with the syzkaller reproducer:

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/

In the Linux kernel, the following vulnerability has been resolved: fs/smb: Fix inconsistent refcnt update A possible inconsistent update of refcount was identified in `smb2_compound_op`. Such inconsistent update could lead to possible resource leaks. Why it is a possible bug: 1. In the comment section of the function, it clearly states that the reference to `cfile` should be dropped after calling this function. 2. Every control flow path would check and drop the reference to `cfile`, except the patched one. 3. Existing callers would not handle refcount update of `cfile` if -ENOMEM is returned. To fix the bug, an extra goto label "out" is added, to make sure that the cleanup logic would always be respected. As the problem is caused by the allocation failure of `vars`, the cleanup logic between label "finished" and "out" can be safely ignored. According to the definition of function `is_replayable_error`, the error code of "-ENOMEM" is not recoverable. Therefore, the replay logic also gets ignored.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save Improper use of secondary pointer (&dev->i2c_subip_regs) caused kernel crash and out-of-bounds error: BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510 Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107 CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary) Workqueue: async async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x660 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x26/0x200 kasan_report+0xe1/0x120 ? _regmap_bulk_read+0x449/0x510 ? _regmap_bulk_read+0x449/0x510 __asan_report_store4_noabort+0x17/0x30 _regmap_bulk_read+0x449/0x510 ? __pfx__regmap_bulk_read+0x10/0x10 regmap_bulk_read+0x270/0x3d0 pio_complete+0x1ee/0x2c0 [intel_thc] ? __pfx_pio_complete+0x10/0x10 [intel_thc] ? __pfx_pio_wait+0x10/0x10 [intel_thc] ? regmap_update_bits_base+0x13b/0x1f0 thc_i2c_subip_pio_read+0x117/0x270 [intel_thc] thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc] ? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc] [...] The buggy address belongs to the object at ffff888136005d00 which belongs to the cache kmalloc-rnd-12-192 of size 192 The buggy address is located 0 bytes to the right of allocated 192-byte region [ffff888136005d00, ffff888136005dc0) Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure safe memory access.

In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare Observed on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0 If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become negative, leadings to oob. The issue can be triggered by parallel lookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oob Fix it by checking 'guid' before cmp.

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: always use READ_ONCE() to read ring provided buffer lengths Since the buffers are mapped from userspace, it is prudent to use READ_ONCE() to read the value into a local variable, and use that for any other actions taken. Having a stable read of the buffer length avoids worrying about it changing after checking, or being read multiple times. Similarly, the buffer may well change in between it being picked and being committed. Ensure the looping for incremental ring buffer commit stops if it hits a zero sized buffer, as no further progress can be made at that point.

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: fix stack overrun when loading vlenb The userspace load can put up to 2048 bits into an xlen bit stack buffer. We want only xlen bits, so check the size beforehand.

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset Issuing a reset when the driver is loaded without RDMA support, will results in a crash as it attempts to remove RDMA's non-existent auxbus device: echo 1 > /sys/class/net/<if>/device/reset BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice] ... Call Trace: <TASK> ice_prepare_for_reset+0x77/0x260 [ice] pci_dev_save_and_disable+0x2c/0x70 pci_reset_function+0x88/0x130 reset_store+0x5a/0xa0 kernfs_fop_write_iter+0x15e/0x210 vfs_write+0x273/0x520 ksys_write+0x6b/0xe0 do_syscall_64+0x79/0x3b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but pf->cdev_info will also be NULL, leading to the deref in the trace above. Introduce a flag to be set when the creation of the auxbus device is successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev().

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix potential warning in trace_printk_seq during ftrace_dump When calling ftrace_dump_one() concurrently with reading trace_pipe, a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race condition. The issue occurs because: CPU0 (ftrace_dump) CPU1 (reader) echo z > /proc/sysrq-trigger !trace_empty(&iter) trace_iterator_reset(&iter) <- len = size = 0 cat /sys/kernel/tracing/trace_pipe trace_find_next_entry_inc(&iter) __find_next_entry ring_buffer_empty_cpu <- all empty return NULL trace_printk_seq(&iter.seq) WARN_ON_ONCE(s->seq.len >= s->seq.size) In the context between trace_empty() and trace_find_next_entry_inc() during ftrace_dump, the ring buffer data was consumed by other readers. This caused trace_find_next_entry_inc to return NULL, failing to populate `iter.seq`. At this point, due to the prior trace_iterator_reset, both `iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal, the WARN_ON_ONCE condition is triggered. Move the trace_printk_seq() into the if block that checks to make sure the return value of trace_find_next_entry_inc() is non-NULL in ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before subsequent operations.

In the Linux kernel, the following vulnerability has been resolved: sctp: initialize more fields in sctp_v6_from_sk() syzbot found that sin6_scope_id was not properly initialized, leading to undefined behavior. Clear sin6_scope_id and sin6_flowinfo. BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix memory corruption when FW resources change during ifdown bnxt_set_dflt_rings() assumes that it is always called before any TC has been created. So it doesn't take bp->num_tc into account and assumes that it is always 0 or 1. In the FW resource or capability change scenario, the FW will return flags in bnxt_hwrm_if_change() that will cause the driver to reinitialize and call bnxt_cancel_reservations(). This will lead to bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc may be greater than 1. This will cause bp->tx_ring[] to be sized too small and cause memory corruption in bnxt_alloc_cp_rings(). Fix it by properly scaling the TX rings by bp->num_tc in the code paths mentioned above. Add 2 helper functions to determine bp->tx_nr_rings and bp->tx_nr_rings_per_tc.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a trailing byte, making the actual length is one more byte than the structs defined. It caused stack-out-of-bounds and kernel crash: kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75 kernel: kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary) kernel: Workqueue: async async_run_entry_fn kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x76/0xa0 kernel: print_report+0xd1/0x660 kernel: ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kernel: ? __kasan_slab_free+0x5d/0x80 kernel: ? kasan_addr_to_slab+0xd/0xb0 kernel: kasan_report+0xe1/0x120 kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: kasan_check_range+0x11c/0x200 kernel: __asan_memcpy+0x3b/0x80 kernel: quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? __pfx_quicki2c_acpi_get_dsd_property.constprop.0+0x10/0x10 [intel_quicki2c] kernel: quicki2c_get_acpi_resources+0x237/0x730 [intel_quicki2c] [...] kernel: </TASK> kernel: kernel: The buggy address belongs to stack of task kworker/u33:2/75 kernel: and is located at offset 48 in frame: kernel: quicki2c_get_acpi_resources+0x0/0x730 [intel_quicki2c] kernel: kernel: This frame has 3 objects: kernel: [32, 36) 'hid_desc_addr' kernel: [48, 59) 'i2c_param' kernel: [80, 224) 'i2c_config' ACPI DSD methods return: \_SB.PC00.THC0.ICRS Buffer 000000003fdc947b 001 Len 0C = 0A 00 80 1A 06 00 00 00 00 00 00 00 \_SB.PC00.THC0.ISUB Buffer 00000000f2fcbdc4 001 Len 91 = 00 00 00 00 00 00 00 00 00 00 00 00 Adding reserved padding to quicki2c_subip_acpi_parameter/config.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version() in ntrig_report_version(), hdev parameter passed from hid_probe(). sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null if hdev->dev.parent->parent is null, usb_dev has invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned when usb_rcvctrlpipe() use usb_dev,it trigger page fault error for address(0xffffffffffffff58) add null check logic to ntrig_report_version() before calling hid_to_usb_dev()

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add error handling for old state CRTC in atomic_disable Introduce error handling to address an issue where, after a hotplug event, the cursor continues to update. This situation can lead to a kernel panic due to accessing the NULL `old_state->crtc`. E,g. Unable to handle kernel NULL pointer dereference at virtual address Call trace: mtk_crtc_plane_disable+0x24/0x140 mtk_plane_atomic_update+0x8c/0xa8 drm_atomic_helper_commit_planes+0x114/0x2c8 drm_atomic_helper_commit_tail_rpm+0x4c/0x158 commit_tail+0xa0/0x168 drm_atomic_helper_commit+0x110/0x120 drm_atomic_commit+0x8c/0xe0 drm_atomic_helper_update_plane+0xd4/0x128 __setplane_atomic+0xcc/0x110 drm_mode_cursor_common+0x250/0x440 drm_mode_cursor_ioctl+0x44/0x70 drm_ioctl+0x264/0x5d8 __arm64_sys_ioctl+0xd8/0x510 invoke_syscall+0x6c/0xe0 do_el0_svc+0x68/0xe8 el0_svc+0x34/0x60 el0t_64_sync_handler+0x1c/0xf8 el0t_64_sync+0x180/0x188 Adding NULL pointer checks to ensure stability by preventing operations on an invalid CRTC state.

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix slab out-of-bounds access in mt_report_fixup() A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40 [...]

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix unregister_netdev call order in macb_remove() When removing a macb device, the driver calls phy_exit() before unregister_netdev(). This leads to a WARN from kernfs: ------------[ cut here ]------------ kernfs: can not remove 'attached_dev', no directory WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683 Call trace: kernfs_remove_by_name_ns+0xd8/0xf0 sysfs_remove_link+0x24/0x58 phy_detach+0x5c/0x168 phy_disconnect+0x4c/0x70 phylink_disconnect_phy+0x6c/0xc0 [phylink] macb_close+0x6c/0x170 [macb] ... macb_remove+0x60/0x168 [macb] platform_remove+0x5c/0x80 ... The warning happens because the PHY is being exited while the netdev is still registered. The correct order is to unregister the netdev before shutting down the PHY and cleaning up the MDIO bus. Fix this by moving unregister_netdev() ahead of phy_exit() in macb_remove().

In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix possible memory leak for vcap_dup_rule() Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak occurs. If kzalloc() for duprule succeeds, but the following kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree them in the error path. unreferenced object 0xffff122744c50600 (size 192): comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'... backtrace: [<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8 [<0000000001bedc67>] kmalloc_trace+0x38/0x88 [<00000000b0612f98>] vcap_dup_rule+0x50/0x460 [<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038 [<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494 [<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698 [<00000000c8766299>] kunit_try_run_case+0xe0/0x20c [<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94 [<00000000f6864acf>] kthread+0x2e8/0x374 [<0000000022e639b3>] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: wifi: iwl4965: Add missing check for create_singlethread_workqueue() Add the check for the return value of the create_singlethread_workqueue() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix kernel crash due to null io->bio We should return when io->bio is null before doing anything. Otherwise, panic. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs] Call Trace: <TASK> f2fs_submit_merged_write+0x1d/0x30 [f2fs] commit_checkpoint+0x110/0x1e0 [f2fs] f2fs_write_checkpoint+0x9f7/0xf00 [f2fs] ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] __checkpoint_and_complete_reqs+0x84/0x190 [f2fs] ? preempt_count_add+0x82/0xc0 ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] issue_checkpoint_thread+0x4c/0xf0 [f2fs] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xff/0x130 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK>

In the Linux kernel, the following vulnerability has been resolved: media: hi846: Fix memleak in hi846_init_controls() hi846_init_controls doesn't clean the allocated ctrl_hdlr in case there is a failure, which causes memleak. Add v4l2_ctrl_handler_free to free the resource properly.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix leak of 'r10bio->remaining' for recovery raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid.

In the Linux kernel, the following vulnerability has been resolved: nfc: fix memory leak of se_io context in nfc_genl_se_io The callback context for sending/receiving APDUs to/from the selected secure element is allocated inside nfc_genl_se_io and supposed to be eventually freed in se_io_cb callback function. However, there are several error paths where the bwi_timer is not charged to call se_io_cb later, and the cb_context is leaked. The patch proposes to free the cb_context explicitly on those error paths. At the moment we can't simply check 'dev->ops->se_io()' return value as it may be negative in both cases: when the timer was charged and was not.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp conn->chan_lock isn't acquired before l2cap_get_chan_by_scid, if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance' is triggered.

In the Linux kernel, the following vulnerability has been resolved: sctp: check send stream number after wait_for_sndbuf This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf.

In the Linux kernel, the following vulnerability has been resolved: udf: Do not update file length for failed writes to inline files When write to inline file fails (or happens only partly), we still updated length of inline data as if the whole write succeeded. Fix the update of length of inline data to happen only if the write succeeds.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup() Syzbot reported a null-ptr-deref bug: ntfs3: loop0: Different NTFS' sector size (1024) and media sector size (512) ntfs3: loop0: Mark volume as dirty due to NTFS errors general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline] RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796 Call Trace: <TASK> d_splice_alias+0x122/0x3b0 fs/dcache.c:3191 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3688 do_filp_open+0x264/0x4f0 fs/namei.c:3718 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_open fs/open.c:1334 [inline] __se_sys_open fs/open.c:1330 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1330 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd If the MFT record of ntfs inode is not a base record, inode->i_op can be NULL. And a null-ptr-deref may happen: ntfs_lookup() dir_search_u() # inode->i_op is set to NULL d_splice_alias() __d_add() d_flags_for_inode() # inode->i_op->get_link null-ptr-deref Fix this by adding a Check on inode->i_op before calling the d_splice_alias() function.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none After grabbing q->sysfs_lock, q->elevator may become NULL because of elevator switch. Fix the NULL dereference on q->elevator by checking it with lock.

In the Linux kernel, the following vulnerability has been resolved: rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale Running the 'kfree_rcu_test' test case [1] results in a splat [2]. The root cause is the kfree_scale_thread thread(s) continue running after unloading the rcuscale module. This commit fixes that isue by invoking kfree_scale_cleanup() from rcu_scale_cleanup() when removing the rcuscale module. [1] modprobe rcuscale kfree_rcu_test=1 // After some time rmmod rcuscale rmmod torture [2] BUG: unable to handle page fault for address: ffffffffc0601a87 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:0xffffffffc0601a87 Code: Unable to access opcode bytes at 0xffffffffc0601a5d. RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? kvfree_call_rcu+0xf0/0x3a0 ? kthread+0xf3/0x120 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x1f/0x30 </TASK> Modules linked in: rfkill sunrpc ... [last unloaded: torture] CR2: ffffffffc0601a87 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: samples/bpf: Fix fout leak in hbm's run_bpf_prog Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope.

In the Linux kernel, the following vulnerability has been resolved: media: bdisp: Add missing check for create_workqueue Add the check for the return value of the create_workqueue in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix memory leak in drm_client_modeset_probe When a new mode is set to modeset->mode, the previous mode should be freed. This fixes the following kmemleak report: drm_mode_duplicate+0x45/0x220 [drm] drm_client_modeset_probe+0x944/0xf50 [drm] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper] drm_client_register+0x169/0x240 [drm] ast_pci_probe+0x142/0x190 [ast] local_pci_probe+0xdc/0x180 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x8b7/0x1540 worker_thread+0x70a/0xed0 kthread+0x29f/0x340 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Put the cdns set active part outside the spin lock The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Return the firmware result upon destroying QP/RQ Previously when destroying a QP/RQ, the result of the firmware destruction function was ignored and upper layers weren't informed about the failure. Which in turn could lead to various problems since when upper layer isn't aware of the failure it continues its operation thinking that the related QP/RQ was successfully destroyed while it actually wasn't, which could lead to the below kernel WARN. Currently, we return the correct firmware destruction status to upper layers which in case of the RQ would be mlx5_ib_destroy_wq() which was already capable of handling RQ destruction failure or in case of a QP to destroy_qp_common(), which now would actually warn upon qp destruction failure. WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0f RSP: 0018:ffff8881533e3e78 EFLAGS: 00010287 RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000 RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0 RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009 R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780 R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000 FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_uverbs_close+0x1a/0x90 [ib_uverbs] __fput+0x82/0x230 task_work_run+0x59/0x90 exit_to_user_mode_prepare+0x138/0x140 syscall_exit_to_user_mode+0x1d/0x50 ? __x64_sys_close+0xe/0x40 do_syscall_64+0x4a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8be3ae0abb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44 RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abb RDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005 RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8 R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ext4: add bounds checking in get_max_inline_xattr_value_size() Normally the extended attributes in the inode body would have been checked when the inode is first opened, but if someone is writing to the block device while the file system is mounted, it's possible for the inode table to get corrupted. Add bounds checking to avoid reading beyond the end of allocated memory if this happens.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might be NULL and will cause null pointer dereference later. Therefore, it might be better to check it and directly return -ENOMEM. Patchwork: https://patchwork.freedesktop.org/patch/512277/ [DB: fixed typo in commit message]

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write During the sysfs firmware write process, a use-after-free read warning is logged from the lpfc_wr_object() routine: BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc] Use-after-free read at 0x0000000000cf164d (in kfence-#111): lpfc_wr_object+0x235/0x310 [lpfc] lpfc_write_firmware.cold+0x206/0x30d [lpfc] lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc] lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc] kernfs_fop_write_iter+0x121/0x1b0 new_sync_write+0x11c/0x1b0 vfs_write+0x1ef/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x59/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The driver accessed wr_object pointer data, which was initialized into mailbox payload memory, after the mailbox object was released back to the mailbox pool. Fix by moving the mailbox free calls to the end of the routine ensuring that we don't reference internal mailbox memory after release.

In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8723bs: Fix locking in _rtw_join_timeout_handler() Commit 041879b12ddb ("drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()") besides fixing the deadlock also modified _rtw_join_timeout_handler() to use spin_[un]lock_irq() instead of spin_[un]lock_bh(). _rtw_join_timeout_handler() calls rtw_do_join() which takes pmlmepriv->scanned_queue.lock using spin_[un]lock_bh(). This spin_unlock_bh() call re-enables softirqs which triggers an oops in kernel/softirq.c: __local_bh_enable_ip() when it calls lockdep_assert_irqs_enabled(): [ 244.506087] WARNING: CPU: 2 PID: 0 at kernel/softirq.c:376 __local_bh_enable_ip+0xa6/0x100 ... [ 244.509022] Call Trace: [ 244.509048] <IRQ> [ 244.509100] _rtw_join_timeout_handler+0x134/0x170 [r8723bs] [ 244.509468] ? __pfx__rtw_join_timeout_handler+0x10/0x10 [r8723bs] [ 244.509772] ? __pfx__rtw_join_timeout_handler+0x10/0x10 [r8723bs] [ 244.510076] call_timer_fn+0x95/0x2a0 [ 244.510200] __run_timers.part.0+0x1da/0x2d0 This oops is causd by the switch to spin_[un]lock_irq() which disables the IRQs for the entire duration of _rtw_join_timeout_handler(). Disabling the IRQs is not necessary since all code taking this lock runs from either user contexts or from softirqs, switch back to spin_[un]lock_bh() to fix this.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up gets called for uninitialized wait queue sp->nvme_ls_waitq. qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0 qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed previously in the commits tagged Fixed: below.

In the Linux kernel, the following vulnerability has been resolved: misc: vmw_balloon: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in ubifs_sysfs_init() When insmod ubifs.ko, a kmemleak reported as below: unreferenced object 0xffff88817fb1a780 (size 8): comm "insmod", pid 25265, jiffies 4295239702 (age 100.130s) hex dump (first 8 bytes): 75 62 69 66 73 00 ff ff ubifs... backtrace: [<ffffffff81b3fc4c>] slab_post_alloc_hook+0x9c/0x3c0 [<ffffffff81b44bf3>] __kmalloc_track_caller+0x183/0x410 [<ffffffff8198d3da>] kstrdup+0x3a/0x80 [<ffffffff8198d486>] kstrdup_const+0x66/0x80 [<ffffffff83989325>] kvasprintf_const+0x155/0x190 [<ffffffff83bf55bb>] kobject_set_name_vargs+0x5b/0x150 [<ffffffff83bf576b>] kobject_set_name+0xbb/0xf0 [<ffffffff8100204c>] do_one_initcall+0x14c/0x5a0 [<ffffffff8157e380>] do_init_module+0x1f0/0x660 [<ffffffff815857be>] load_module+0x6d7e/0x7590 [<ffffffff8158644f>] __do_sys_finit_module+0x19f/0x230 [<ffffffff815866b3>] __x64_sys_finit_module+0x73/0xb0 [<ffffffff88c98e85>] do_syscall_64+0x35/0x80 [<ffffffff88e00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd When kset_register() failed, we should call kset_put to cleanup it.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwl3945: Add missing check for create_singlethread_workqueue Add the check for the return value of the create_singlethread_workqueue in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Free memory for tmpfile name When opening a ubifs tmpfile on an encrypted directory, function fscrypt_setup_filename allocates memory for the name that is to be stored in the directory entry, but after the name has been copied to the directory entry inode, the memory is not freed. When running kmemleak on it we see that it is registered as a leak. The report below is triggered by a simple program 'tmpfile' just opening a tmpfile: unreferenced object 0xffff88810178f380 (size 32): comm "tmpfile", pid 509, jiffies 4294934744 (age 1524.742s) backtrace: __kmem_cache_alloc_node __kmalloc fscrypt_setup_filename ubifs_tmpfile vfs_tmpfile path_openat Free this memory after it has been copied to the inode.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix a possible null-pointer dereference due to data race in snd_hdac_regmap_sync() The variable codec->regmap is often protected by the lock codec->regmap_lock when is accessed. However, it is accessed without holding the lock when is accessed in snd_hdac_regmap_sync(): if (codec->regmap) In my opinion, this may be a harmful race, because if codec->regmap is set to NULL right after the condition is checked, a null-pointer dereference can occur in the called function regcache_sync(): map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c To fix this possible null-pointer dereference caused by data race, the mutex_lock coverage is extended to protect the if statement as well as the function call to regcache_sync(). [ Note: the lack of the regmap_lock itself is harmless for the current codec driver implementations, as snd_hdac_regmap_sync() is only for PM runtime resume that is prohibited during the codec probe. But the change makes the whole code more consistent, so it's merged as is -- tiwai ]

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt8183: Add back SSPM related clocks This reverts commit 860690a93ef23b567f781c1b631623e27190f101. On the MT8183, the SSPM related clocks were removed claiming a lack of usage. This however causes some issues when the driver was converted to the new simple-probe mechanism. This mechanism allocates enough space for all the clocks defined in the clock driver, not the highest index in the DT binding. This leads to out-of-bound writes if their are holes in the DT binding or the driver (due to deprecated or unimplemented clocks). These errors can go unnoticed and cause memory corruption, leading to crashes in unrelated areas, or nothing at all. KASAN will detect them. Add the SSPM related clocks back to the MT8183 clock driver to fully implement the DT binding. The SSPM clocks are for the power management co-processor, and should never be turned off. They are marked as such.

In the Linux kernel, the following vulnerability has been resolved: Drivers: vmbus: Check for channel allocation before looking up relids relid2channel() assumes vmbus channel array to be allocated when called. However, in cases such as kdump/kexec, not all relids will be reset by the host. When the second kernel boots and if the guest receives a vmbus interrupt during vmbus driver initialization before vmbus_connect() is called, before it finishes, or if it fails, the vmbus interrupt service routine is called which in turn calls relid2channel() and can cause a null pointer dereference. Print a warning and error out in relid2channel() for a channel id that's invalid in the second kernel.

In the Linux kernel, the following vulnerability has been resolved: net: ena: fix shift-out-of-bounds in exponential backoff The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future.

In the Linux kernel, the following vulnerability has been resolved: ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume() There is a memory leaks problem reported by kmemleak: unreferenced object 0xffff888102007a00 (size 128): comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi] [<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi] [<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi] [<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170 [<ffffffff83c142a5>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This is due to a mismatch between create and destroy interfaces, and in detail that "new_eba_tbl" created by ubi_eba_create_table() but destroyed by kfree(), while will causing "new_eba_tbl->entries" not freed. Fix it by replacing kfree(new_eba_tbl) with ubi_eba_destroy_table(new_eba_tbl)

In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_disksize exceeding i_size problem in paritally written case It is possible for i_disksize can exceed i_size, triggering a warning. generic_perform_write copied = iov_iter_copy_from_user_atomic(len) // copied < len ext4_da_write_end | ext4_update_i_disksize | new_i_size = pos + copied; | WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize | generic_write_end | copied = block_write_end(copied, len) // copied = 0 | if (unlikely(copied < len)) | if (!PageUptodate(page)) | copied = 0; | if (pos + copied > inode->i_size) // return false if (unlikely(copied == 0)) goto again; if (unlikely(iov_iter_fault_in_readable(i, bytes))) { status = -EFAULT; break; } We get i_disksize greater than i_size here, which could trigger WARNING check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio: ext4_dio_write_iter iomap_dio_rw __iomap_dio_rw // return err, length is not aligned to 512 ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319 CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2 RIP: 0010:ext4_file_write_iter+0xbc7 Call Trace: vfs_write+0x3b1 ksys_write+0x77 do_syscall_64+0x39 Fix it by updating 'copied' value before updating i_disksize just like ext4_write_inline_data_end() does. A reproducer can be found in the buganizer link below.