CVEs

In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport.

In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer.

In the Linux kernel, the following vulnerability has been resolved: rqspinlock: Reset tail when preserving queue on deadlock Currently, the destruction of the waiter queue is suppressed for rqspinlock in cases where a deadlock is detected. Deadlock checks happen relatively frequently (on entry for AA, within 1ms for ABBA), and waiter threads may not be involved in locking scenarios involving deadlocks. Thus, it is useful to not flush the queue and let other waiters take a stab at acquiring the lock after we detect a deadlock and exit. However, we need to follow the same logic as what we did previously for the waitq_timeout label: reset the tail, and if we cannot, signal the next waiter appropriately. In case of deadlocks, this signal would just mark the MCS node as unlocked, and in case of timeouts, it would signal RES_TIMEOUT_VAL. The difference thus is in the value propagated, which decides whether the queue remains active or gets flushed. Not doing the tail reset, and waiting for the next waiter can lead to cases where we are the final waiter, and thus no next waiter arrives, leading to intermittent stalls in this path. Once the next waiter does join, we will be unblocked. In the theoretical case when the next waiter never joins, we risk stalling indefinitely. This can only happen for ABBA deadlocks, since entry into the wait queue is guarded with AA checks. A precise sequence of executions leading up to this scenario can be: CPU 0 holds lock A. CPU 1 holds lock B. CPU 2 attempts lock B, becomes the pending waiter for B. CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues. CPU 1 attempts lock A. CPU 0 detects an ABBA deadlock. Once deadlock detection happens for CPU 0, it will sit waiting for the next waiter in the queue to populate node->next, which will experience delays until such a waiter arrives. Fix this by adjusting the logic for the check for deadlocks preceding the waitq_timeout label. It would make sense to consolidate code for both cases and use 'ret' to distinguish the value being propagated, but that is left as an exercise for a future refactoring task to avoid diff noise in this patch.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Clamp negative current limits When a negative value is passed to ltc4282_write_curr(), the signed long val is cast directly to u64: drivers/hwmon/ltc4282.c:ltc4282_write_curr() { /* need to pass it in millivolt */ u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO); ... } This cast converts negative inputs into large positive values. The subsequent division result overflows the u32 in variable, truncating to a pseudo-random positive value. When this is passed to ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead of zero. Clamp val to 0 and to the maximum supported upper limit before the cast and assign the result to a 64-bit temporary variable before the division to avoid the underflow and an also possible overflow.

In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit().

In the Linux kernel, the following vulnerability has been resolved: Input: evdev - sanitize event type index when fetching event masks The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK ioctls is used to index the static counts array in evdev_get_mask_cnt() and client evmasks array in evdev_get_mask(). While the event type is architecturally bounded by EV_CNT, speculative execution may mispredict bounds checks and perform out-of-bounds loads. Sanitize the event type index in evdev_get_mask_cnt() branchlessly using array_index_mask_nospec(). This clamps the index to 0 for safe array access and forces the returned count to 0 speculatively when the index is out of bounds. We do not need additional array_index_nospec() calls in evdev_get_mask() because evdev_get_mask_cnt() speculatively forces the count (and resulting xfer_size) to 0 for out-of-bounds types, preventing any speculative memory access to client evmasks array.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream. KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report per inbound transfer: BUG: KASAN: slab-out-of-bounds in dummy_timer Write of size 64 at addr ffff0000186171c0 by task cons02/166 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 166: usb_alloc_coherent snd_usb_endpoint_set_params The buggy address is located 0 bytes to the right of allocated 64-byte region [ffff000018617180, ffff0000186171c0) Compute buffer_size after the delimiter packet has been accounted for, and bound the fill loop by buffer_size, as prepare_silent_urb() already does on the outbound side. This grows every Type II URB allocation by one maxsize packet. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT endpoint size. Both are taken independently from different endpoints in usbio_probe(), so the check is wrong when they differ. Use rxbuf_len for the IN direction. This matches the buffer that actually holds the response data.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: <TASK> cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178 cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370 ... To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts early. We can safely call usb_kill_urb() on rcv_urb in the error path, as it is safe to call even if the URB is not active (e.g., if it failed to submit in the first place, or if it already completed).

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Use unsigned int for ndp_index The variable ndp_index is declared as a signed integer, but it stores the return value of get_ncm(), which is unsigned. A malicious host can supply a large offset that overflows the signed ndp_index, making it negative. Because ndp_index is compared against unsigned bounds, this negative value bypasses sanity checks and leads to an out-of-bounds read when calculating the address of the NDP block (ntb_ptr + ndp_index). Fix this by changing ndp_index to unsigned int to ensure consistent unsigned comparisons throughout the function.