Network vulnerabilities

VeloCloud Orchestrator (VCO) on-prem has a security issue where this issue may allow a remote attacker to access privileged internal functionality and impact the VCO host. Successful exploitation may compromise the confidentiality, integrity, and availability of the orchestrator and data managed by the orchestrator. This functionality was intended to be for internal use only and is not intended to be remotely accessible. Hosted and Dedicated versions of VCO have already been patched in advance of this notice going out. This issue was discovered externally and is known to be actively exploited.

An issue was discovered in router/upnp/src/ssdp.c in DD-WRT before 45724. An unsafe strcpy in the UPnP handling functionality allows an unauthenticated remote attacker to send a request that would overflow an internal fixed buffer. Exploitation requires the DD-WRT user to enable UPnP (which is off by default, and only listens on internal interfaces by default). This occurs in ssdp_msearch (reachable by an M-SEARCH request).

A Server-side request forgery (SSRF) vulnerability has been identified in the SMA1000 Appliance Work Place interface. A remote unauthenticated attacker could potentially cause the appliance to make requests to unintended location.

Missing authentication for critical function in Microsoft Office SharePoint allows an unauthorized attacker to elevate privileges over a network.

Insufficient granularity of access control in Active Directory Federation Services (AD FS) allows an authorized attacker to elevate privileges locally.

For requests that have a body, but reading the body may end up in reading 0 bytes, there is a buffer leak. This is particularly the case for 100-Continue, but any request where the network is slow can leak.

Memory overflow vulnerability NetScaler ADC and NetScaler Gateway leading to unpredictable or erroneous behavior and Denial of Service if the appliance is configured as a Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server

A critical remote code execution (RCE) vulnerability has been reported in PTC Windchill PDMlink and PTC FlexPLM. The vulnerability may be exploited through the deserialization of untrusted data.  * This advisory also applies to all CPS versions * The identified vulnerability also impacts Windchill and FlexPLM releases prior to 11.0 M030

SimpleHelp versions 5.5.15 and prior and 6.0 pre-release versions contain an authentication bypass vulnerability in the OIDC authentication flow. When OIDC authentication is configured, identity tokens submitted during login are accepted without verifying their cryptographic signature. In a vulnerable configuration, a remote, unauthenticated attacker can submit a forged token containing arbitrary identity claims to obtain a fully authenticated technician session. In some configurations, this may also allow bypass of multi-factor authentication. No user interaction is required.

In Splunk Enterprise 10.2 versions below 10.2.4 and 10 versions below 10.0.7, an unauthenticated user could create or truncate arbitrary files through a PostgreSQL sidecar service endpoint. The vulnerability exists because the PostgreSQL sidecar service endpoint lacks authentication controls, allowing any network-reachable user to invoke file operations without credentials. Splunk Enterprise versions 9.4 and earlier are not affected. If you cannot immediately upgrade to a fixed version, you can mitigate this vulnerability by disabling the PostgreSQL sidecar service.

An Authentication Bypass vulnerability (CWE-288) in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated attacker to create arbitrary administrative accounts and obtain full administrative access

An OS Command Injection vulnerability in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated user to achieve root-level remote code execution

A logic flow weakness in Remote Access and Mobile Access certificate validation in deprecated IKEv1 key exchange allows an unauthenticated remote attacker to bypass user authentication and establish a remote access VPN connection without a valid user password.

A vulnerability in the CLI of Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an authenticated, local attacker to execute arbitrary commands as root by supplying a crafted file to the affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user. To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of or . Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices. Cisco recommends that customers upgrade to the fixed software that is documented in the that was published on May 14, 2026, and verify the configuration of the edge devices.

A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct server-side request forgery (SSRF) attacks through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to write files to the underlying operating system that could be used later to elevate to root. Note: Cisco has assigned this security advisory a Security Impact Rating (SIR) of Critical rather than High as the score indicates. The reason is that exploitation of this vulnerability could result in an attacker elevating privileges to root. Note: To exploit this vulnerability, the WebDialer service must be enabled. WebDialer is disabled by default.

Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.

A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi OS devices to execute a Command Injection.

A malicious actor with access to the network could exploit a Path Traversal vulnerability found in UniFi OS devices to access files on the underlying system that could be manipulated to access an underlying account.

A malicious actor with access to the network could exploit an Improper Access Control vulnerability found in UniFi OS devices to make unauthorized changes to the system.

May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.  A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric.

Authentication bypass vulnerabilities in the GlobalProtect portal and gateway of Palo Alto Networks PAN-OS® software allows the attacker to bypass security restrictions and establish an unauthorized VPN connection. Panorama and Cloud NGFW are not impacted by these issues.

A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets. The risk of this issue is greatly reduced if you secure access to the User-ID™ Authentication Portal per the best practice guidelines https://knowledgebase.paloaltonetworks.com/KCSArticleDetail by restricting access to only trusted internal IP addresses. Prisma Access, Cloud NGFW and Panorama appliances are not impacted by this vulnerability.

Improper verification of cryptographic signature in ASP.NET Core allows an unauthorized attacker to elevate privileges over a network.

A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows TCP/IP allows an unauthorized attacker to execute code over a network.

Double free in Windows IKE Extension allows an unauthorized attacker to execute code over a network.

Protection mechanism failure in Windows Shell allows an unauthorized attacker to perform spoofing over a network.

Improper input validation in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

Acrobat Reader versions 24.001.30356, 26.001.21367 and earlier are affected by an Improperly Controlled Modification of Object Prototype Attributes ('Prototype Pollution') vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Issue summary: Applications using RSASVE key encapsulation to establish a secret encryption key can send contents of an uninitialized memory buffer to a malicious peer. Impact summary: The uninitialized buffer might contain sensitive data from the previous execution of the application process which leads to sensitive data leakage to an attacker. RSA_public_encrypt() returns the number of bytes written on success and -1 on error. The affected code tests only whether the return value is non-zero. As a result, if RSA encryption fails, encapsulation can still return success to the caller, set the output lengths, and leave the caller to use the contents of the ciphertext buffer as if a valid KEM ciphertext had been produced. If applications use EVP_PKEY_encapsulate() with RSA/RSASVE on an attacker-supplied invalid RSA public key without first validating that key, then this may cause stale or uninitialized contents of the caller-provided ciphertext buffer to be disclosed to the attacker in place of the KEM ciphertext. As a workaround calling EVP_PKEY_public_check() or EVP_PKEY_public_check_quick() before EVP_PKEY_encapsulate() will mitigate the issue. The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.1 and 3.0 are affected by this issue.

Issue summary: Converting an excessively large OCTET STRING value to a hexadecimal string leads to a heap buffer overflow on 32 bit platforms. Impact summary: A heap buffer overflow may lead to a crash or possibly an attacker controlled code execution or other undefined behavior. If an attacker can supply a crafted X.509 certificate with an excessively large OCTET STRING value in extensions such as the Subject Key Identifier (SKID) or Authority Key Identifier (AKID) which are being converted to hex, the size of the buffer needed for the result is calculated as multiplication of the input length by 3. On 32 bit platforms, this multiplication may overflow resulting in the allocation of a smaller buffer and a heap buffer overflow. Applications and services that print or log contents of untrusted X.509 certificates are vulnerable to this issue. As the certificates would have to have sizes of over 1 Gigabyte, printing or logging such certificates is a fairly unlikely operation and only 32 bit platforms are affected, this issue was assigned Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: During processing of a crafted CMS EnvelopedData message with KeyTransportRecipientInfo a NULL pointer dereference can happen. Impact summary: Applications that process attacker-controlled CMS data may crash before authentication or cryptographic operations occur resulting in Denial of Service. When a CMS EnvelopedData message that uses KeyTransportRecipientInfo with RSA-OAEP encryption is processed, the optional parameters field of RSA-OAEP SourceFunc algorithm identifier is examined without checking for its presence. This results in a NULL pointer dereference if the field is missing. Applications and services that call CMS_decrypt() on untrusted input (e.g., S/MIME processing or CMS-based protocols) are vulnerable. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: During processing of a crafted CMS EnvelopedData message with KeyAgreeRecipientInfo a NULL pointer dereference can happen. Impact summary: Applications that process attacker-controlled CMS data may crash before authentication or cryptographic operations occur resulting in Denial of Service. When a CMS EnvelopedData message that uses KeyAgreeRecipientInfo is processed, the optional parameters field of KeyEncryptionAlgorithmIdentifier is examined without checking for its presence. This results in a NULL pointer dereference if the field is missing. Applications and services that call CMS_decrypt() on untrusted input (e.g., S/MIME processing or CMS-based protocols) are vulnerable. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: When a delta CRL that contains a Delta CRL Indicator extension is processed a NULL pointer dereference might happen if the required CRL Number extension is missing. Impact summary: A NULL pointer dereference can trigger a crash which leads to a Denial of Service for an application. When CRL processing and delta CRL processing is enabled during X.509 certificate verification, the delta CRL processing does not check whether the CRL Number extension is NULL before dereferencing it. When a malformed delta CRL file is being processed, this parameter can be NULL, causing a NULL pointer dereference. Exploiting this issue requires the X509_V_FLAG_USE_DELTAS flag to be enabled in the verification context, the certificate being verified to contain a freshestCRL extension or the base CRL to have the EXFLAG_FRESHEST flag set, and an attacker to provide a malformed CRL to an application that processes it. The vulnerability is limited to Denial of Service and cannot be escalated to achieve code execution or memory disclosure. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: An uncommon configuration of clients performing DANE TLSA-based server authentication, when paired with uncommon server DANE TLSA records, may result in a use-after-free and/or double-free on the client side. Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, the issue only affects clients that make use of TLSA records with both the PKIX-TA(0/PKIX-EE(1) certificate usages and the DANE-TA(2) certificate usage. By far the most common deployment of DANE is in SMTP MTAs for which RFC7672 recommends that clients treat as 'unusable' any TLSA records that have the PKIX certificate usages. These SMTP (or other similar) clients are not vulnerable to this issue. Conversely, any clients that support only the PKIX usages, and ignore the DANE-TA(2) usage are also not vulnerable. The client would also need to be communicating with a server that publishes a TLSA RRset with both types of TLSA records. No FIPS modules are affected by this issue, the problem code is outside the FIPS module boundary.

Improper Input Validation, Improper Control of Generation of Code ('Code Injection') vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ. Apache ActiveMQ Classic exposes the Jolokia JMX-HTTP bridge at /api/jolokia/ on the web console. The default Jolokia access policy permits exec operations on all ActiveMQ MBeans (org.apache.activemq:*), including BrokerService.addNetworkConnector(String) and BrokerService.addConnector(String). An authenticated attacker can invoke these operations with a crafted discovery URI that triggers the VM transport's brokerConfig parameter to load a remote Spring XML application context using ResourceXmlApplicationContext. Because Spring's ResourceXmlApplicationContext instantiates all singleton beans before the BrokerService validates the configuration, arbitrary code execution occurs on the broker's JVM through bean factory methods such as Runtime.exec(). This issue affects Apache ActiveMQ Broker: before 5.19.4, from 6.0.0 before 6.2.3; Apache ActiveMQ All: before 5.19.4, from 6.0.0 before 6.2.3; Apache ActiveMQ: before 5.19.4, from 6.0.0 before 6.2.3. Users are recommended to upgrade to version 5.19.4 or 6.2.3, which fixes the issue

A improper access control vulnerability in Fortinet FortiClientEMS 7.4.5 through 7.4.6 may allow an unauthenticated attacker to execute unauthorized code or commands via crafted requests.

Suricata is a network IDS, IPS and NSM engine. Prior to version 7.0.15, inefficiency in DCERPC buffering can lead to a performance degradation. This issue has been patched in version 7.0.15.

Nginx UI is a web user interface for the Nginx web server. In versions 2.3.5 and prior, the nginx-ui MCP (Model Context Protocol) integration exposes two HTTP endpoints: /mcp and /mcp_message. While /mcp requires both IP whitelisting and authentication (AuthRequired() middleware), the /mcp_message endpoint only applies IP whitelisting - and the default IP whitelist is empty, which the middleware treats as "allow all". This means any network attacker can invoke all MCP tools without authentication, including restarting nginx, creating/modifying/deleting nginx configuration files, and triggering automatic config reloads - achieving complete nginx service takeover. At time of publication, there are no publicly available patches.

An Improper Input Validation vulnerability in UniFi Network Server may allow unauthorized access to an account if the account owner is socially engineered into clicking a malicious link. Affected Products: UniFi Network Server (Version 10.1.85 and earlier) Mitigation: Update UniFi Network Server to Version 10.1.89 or later.

Insufficient input validation in NetScaler ADC and NetScaler Gateway when configured as a SAML IDP leading to memory overread

Race Condition in NetScaler ADC and NetScaler Gateway when appliance is configured as Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server leading to User Session Mixup

An Authenticated NoSQL Injection vulnerability found in UniFi Network Application could allow a malicious actor with authenticated access to the network to escalate privileges.

A malicious actor with access to the network could exploit a Path Traversal vulnerability found in the UniFi Network Application to access files on the underlying system that could be manipulated to access an underlying account.

A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. If OSPF authentication is enabled, the attacker must know the secret key to exploit this vulnerability. This vulnerability is due to insufficient input validation when processing OSPF update packets. An attacker could exploit this vulnerability by sending crafted OSPF update packets. A successful exploit could allow the attacker to create a buffer overflow, causing the affected device to reload, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary Java code as root on an affected device. This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced.

A vulnerability in the web interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and execute script files on an affected device to obtain root access to the underlying operating system.  This vulnerability is due to an improper system process that is created at boot time. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute a variety of scripts and commands that allow root access to the device. 

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: classmate-laptop: Add missing NULL pointer checks In a few places in the Classmate laptop driver, code using the accel object may run before that object's address is stored in the driver data of the input device using it. For example, cmpc_accel_sensitivity_store_v4() is the "show" method of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(), before calling dev_set_drvdata() for inputdev->dev. If the sysfs attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev) call in in cmpc_accel_sensitivity_store_v4() returns NULL which leads to a NULL pointer dereference going forward. Moreover, sysfs attributes using the input device are added before initializing that device by cmpc_add_acpi_notify_device() and if one of them is accessed before running that function, a NULL pointer dereference will occur. For example, cmpc_accel_sensitivity_attr_v4 is added before calling cmpc_add_acpi_notify_device() and if it is read prematurely, the dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4() returns NULL which leads to a NULL pointer dereference going forward. Fix this by adding NULL pointer checks in all of the relevant places.

In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: properly copy ioctl memory to kernelspace The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel.