WLAN vulnerabilities

In wlan STA driver, there is a possible out of bounds write due to improper input validation. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00389496 / ALPS09137491; Issue ID: MSV-1835.

In wlan driver, there is a possible client disconnection due to improper handling of exceptional conditions. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00384543; Issue ID: MSV-1727.

Memory corruption while maintaining memory maps of HLOS memory.

Memory corruption while redirecting log file to any file location with any file name.

In wlan driver, there is a possible out of bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08998449; Issue ID: MSV-1603.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_set_cover of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument album_name leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

Windows Wi-Fi Driver Remote Code Execution Vulnerability

The IEEE 802.11 standard sometimes enables an adversary to trick a victim into connecting to an unintended or untrusted network with Home WEP, Home WPA3 SAE-loop. Enterprise 802.1X/EAP, Mesh AMPE, or FILS, aka an "SSID Confusion" issue. This occurs because the SSID is not always used to derive the pairwise master key or session keys, and because there is not a protected exchange of an SSID during a 4-way handshake.

There is a buffer overflow vulnerability in the underlying Local User Authentication Database service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There is a buffer overflow vulnerability in the underlying Automatic Reporting service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There is a buffer overflow vulnerability in the underlying Utility daemon that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

In wlan firmware, there is a possible out of bounds write due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08360153 (for MT6XXX chipsets) / WCNCR00363530 (for MT79XX chipsets); Issue ID: MSV-979.

drivers/wlan/wlan_mgmt,c in RT-Thread through 5.0.2 has an integer signedness error and resultant buffer overflow.

In wlan service, there is a possible out of bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation Patch ID: WCNCR00350938; Issue ID: MSV-1132.

The Access Point functionality in eapol_auth_key_handle in eapol.c in iNet wireless daemon (IWD) before 2.14 allows attackers to gain unauthorized access to a protected Wi-Fi network. An attacker can complete the EAPOL handshake by skipping Msg2/4 and instead sending Msg4/4 with an all-zero key.

The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network's TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks.

Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header.

Cisco is providing an update for the ongoing investigation into observed exploitation of the web UI feature in Cisco IOS XE Software. We are updating the list of fixed releases and adding the Software Checker. Our investigation has determined that the actors exploited two previously unknown issues. The attacker first exploited CVE-2023-20198 to gain initial access and issued a privilege 15 command to create a local user and password combination. This allowed the user to log in with normal user access. The attacker then exploited another component of the web UI feature, leveraging the new local user to elevate privilege to root and write the implant to the file system. Cisco has assigned CVE-2023-20273 to this issue. CVE-2023-20198 has been assigned a CVSS Score of 10.0. CVE-2023-20273 has been assigned a CVSS Score of 7.2. Both of these CVEs are being tracked by CSCwh87343.

A vulnerability in the packet processing functionality of Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to exhaust resources on an affected device.  This vulnerability is due to insufficient management of resources when handling certain types of traffic. An attacker could exploit this vulnerability by sending a series of specific wireless packets to an affected device. A successful exploit could allow the attacker to consume resources on an affected device. A sustained attack could lead to the disruption of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel and intermittent loss of wireless client traffic.

A Command injection vulnerability in RaspAP 2.8.0 thru 2.9.2 allows an authenticated attacker to execute arbitrary OS commands as root via the "entity" POST parameters in /ajax/networking/get_wgkey.php.

A Command injection vulnerability in RaspAP 2.8.0 thru 2.8.7 allows unauthenticated attackers to execute arbitrary commands via the cfg_id parameter in /ajax/openvpn/activate_ovpncfg.php and /ajax/openvpn/del_ovpncfg.php.

A command injection vulnerability in the access point (AP) management feature of the Zyxel ATP series firmware versions 5.00 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.00 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.00 through 5.36 Patch 2, VPN series firmware versions 5.00 through 5.36 Patch 2, NXC2500 firmware versions 6.10(AAIG.0) through 6.10(AAIG.3), and NXC5500 firmware versions 6.10(AAOS.0) through 6.10(AAOS.4), could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device if the attacker could trick an authorized administrator to add their IP address to the managed AP list in advance.

A buffer overflow vulnerability in the Zyxel ATP series firmware versions 4.32 through 5.36 Patch 2, USG FLEX series firmware versions 4.50 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 4.16 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 4.16 through 5.36 Patch 2, VPN series firmware versions 4.30 through 5.36 Patch 2, NXC2500 firmware versions 6.10(AAIG.0) through 6.10(AAIG.3), and NXC5500 firmware versions 6.10(AAOS.0) through 6.10(AAOS.4), could allow an unauthenticated, LAN-based attacker to cause denial of service (DoS) conditions by sending a crafted request to the CAPWAP daemon.

A command injection vulnerability in the Free Time WiFi hotspot feature of the Zyxel USG FLEX series firmware versions 4.50 through 5.36 Patch 2 and VPN series firmware versions 4.20 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device.

A command injection vulnerability in the hotspot management feature of the Zyxel ATP series firmware versions 4.60 through 5.36 Patch 2, USG FLEX series firmware versions 4.60 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 4.60 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 4.60 through 5.36 Patch 2, and VPN series firmware versions 4.60 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device if the attacker could trick an authorized administrator to add their IP address to the list of trusted RADIUS clients in advance.

A command injection vulnerability in the configuration parser of the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted GRE configuration when the cloud management mode is enabled.

A format string vulnerability in the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted PPPoE configuration on an affected device when the cloud management mode is enabled.

The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36,  USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled.

The IEEE 802.11 specifications through 802.11ax allow physically proximate attackers to intercept (possibly cleartext) target-destined frames by spoofing a target's MAC address, sending Power Save frames to the access point, and then sending other frames to the access point (such as authentication frames or re-association frames) to remove the target's original security context. This behavior occurs because the specifications do not require an access point to purge its transmit queue before removing a client's pairwise encryption key.

In wlan, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07441605; Issue ID: ALPS07441605.

There are stack-based buffer overflow vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are stack-based buffer overflow vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Memory corruption due to buffer copy without checking the size of input in WLAN Firmware while processing CCKM IE in reassoc response frame.

Memory corruption due to stack based buffer overflow in WLAN having invalid WNM frame length.

Memory corruption in WLAN due to integer overflow to buffer overflow while parsing GTK frames. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking

Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.

An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.

A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.

A flaw was found in the Linux kernel in net/netfilter/nf_tables_core.c:nft_do_chain, which can cause a use-after-free. This issue needs to handle 'return' with proper preconditions, as it can lead to a kernel information leak problem caused by a local, unprivileged attacker.

A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.

A heap-based buffer overflow vulnerability exists in the OTA Update u-download functionality of Sealevel Systems, Inc. SeaConnect 370W v1.3.34. A series of specially-crafted MQTT payloads can lead to remote code execution. An attacker must perform a man-in-the-middle attack in order to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the NBNS functionality of Sealevel Systems, Inc. SeaConnect 370W v1.3.34. A specially-crafted network packet can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in both the LLMNR functionality of Sealevel Systems, Inc. SeaConnect 370W v1.3.34. A specially-crafted network packet can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability.

A vulnerability in the packet processing functionality of Cisco Embedded Wireless Controller (EWC) Software for Catalyst Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected AP. This vulnerability is due to insufficient buffer allocation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to exhaust available resources and cause a DoS condition on an affected AP, as well as a DoS condition for client traffic traversing the AP.

A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Realtek Jungle SDK version v2.x up to v3.4.14B provides an HTTP web server exposing a management interface that can be used to configure the access point. Two versions of this management interface exists: one based on Go-Ahead named webs and another based on Boa named boa. Both of them are affected by these vulnerabilities. Specifically, these binaries are vulnerable to the following issues: - stack buffer overflow in formRebootCheck due to unsafe copy of submit-url parameter - stack buffer overflow in formWsc due to unsafe copy of submit-url parameter - stack buffer overflow in formWlanMultipleAP due to unsafe copy of submit-url parameter - stack buffer overflow in formWlSiteSurvey due to unsafe copy of ifname parameter - stack buffer overflow in formStaticDHCP due to unsafe copy of hostname parameter - stack buffer overflow in formWsc due to unsafe copy of 'peerPin' parameter - arbitrary command execution in formSysCmd via the sysCmd parameter - arbitrary command injection in formWsc via the 'peerPin' parameter Exploitability of identified issues will differ based on what the end vendor/manufacturer did with the Realtek SDK webserver. Some vendors use it as-is, others add their own authentication implementation, some kept all the features from the server, some remove some of them, some inserted their own set of features. However, given that Realtek SDK implementation is full of insecure calls and that developers tends to re-use those examples in their custom code, any binary based on Realtek SDK webserver will probably contains its own set of issues on top of the Realtek ones (if kept). Successful exploitation of these issues allows remote attackers to gain arbitrary code execution on the device.