Firmware vulnerabilities

Malformed BRID/HHIT records can cause `named` to terminate unexpectedly. This issue affects BIND 9 versions 9.18.40 through 9.18.43, 9.20.13 through 9.20.17, 9.21.12 through 9.21.16, 9.18.40-S1 through 9.18.43-S1, and 9.20.13-S1 through 9.20.17-S1.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW-F . An attacker can update the system firmware with a specially crafted image.

WAGO 750-8212 PFC200 G2 2ETH RS firmware contains a privilege escalation vulnerability that allows attackers to manipulate user session cookies. Attackers can modify the cookie's 'name' and 'roles' parameters to elevate from ordinary user to administrative privileges without authentication.

A vulnerability in the router mode configuration of HPE Instant On Access Points exposed certain network configuration details to unintended interfaces. A malicious actor could gain knowledge of internal network configuration details through inspecting impacted packets.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Information disclosure while processing a firmware event.

A vulnerability was found in Tenda WH450 1.0.0.18. This affects an unknown function of the file /goform/PPTPDClient of the component HTTP Request Handler. Performing a manipulation of the argument Username results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used.

Screen SFT DAB 600/C Firmware 1.9.3 contains a weak session management vulnerability that allows attackers to bypass authentication controls by reusing IP-bound session identifiers. Attackers can exploit the vulnerable deviceManagement API endpoint to reset device configurations by sending crafted POST requests with manipulated session parameters.

Screen SFT DAB 600/C firmware 1.9.3 contains an authentication bypass vulnerability that allows attackers to change the admin password without requiring the current credentials. Attackers can exploit the userManager.cgx API endpoint by sending a crafted POST request with a new MD5-hashed password to directly modify the admin account's authentication.

An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer. If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured.

"UNSUPPORTED WHEN ASSIGNED" Certain versions of the ASUS Live Update client were distributed with unauthorized modifications introduced through a supply chain compromise. The modified builds could cause devices meeting specific targeting conditions to perform unintended actions. Only devices that met these conditions and installed the compromised versions were affected. The Live Update client has already reached End-of-Support (EOS) in October 2021, and no currently supported devices or products are affected by this issue.

An uncontrolled resource consumption vulnerability affects certain ASUS motherboards using Intel B460, B560, B660, B760, H410, H510, H610, H470, Z590, Z690, Z790, W480, W680 series chipsets. Exploitation requires physical access to internal expansion slots to install a specially crafted device and supporting software utility, and may lead to uncontrolled resource consumption that increases the risk of unauthorized direct memory access (DMA). Refer to the 'Security Update for UEFI firmware' section on the ASUS Security Advisory for more information.

Certain motherboard models developed by ASRock and its subsidiaries, ASRockRack and ASRockInd. has a Protection Mechanism Failure vulnerability. Because IOMMU was not properly enabled, unauthenticated physical attackers can use a DMA-capable PCIe device to read and write arbitrary physical memory before the OS kernel and its security features are loaded.

Certain motherboard models developed by MSI has a Protection Mechanism Failure vulnerability. Because IOMMU was not properly enabled, unauthenticated physical attackers can use a DMA-capable PCIe device to read and write arbitrary physical memory before the OS kernel and its security features are loaded.

Certain motherboard models developed by GIGABYTE has a Protection Mechanism Failure vulnerability. Because IOMMU was not properly enabled, unauthenticated physical attackers can use a DMA-capable PCIe device to read and write arbitrary physical memory before the OS kernel and its security features are loaded.

Multiple vulnerabilities in Aqara Hub firmware update process in the Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 devices, allow attackers to install malicious firmware without proper verification. The device fails to validate firmware signatures during updates, uses outdated cryptographic methods that can be exploited to forge valid signatures, and exposes information through improperly initialized memory.

An improper verification of cryptographic signature vulnerability in Fortinet FortiWeb 8.0.0, FortiWeb 7.6.0 through 7.6.4, FortiWeb 7.4.0 through 7.4.9 may allow an unauthenticated attacker to bypass the FortiCloud SSO login authentication via a crafted SAML response message.

A improper verification of cryptographic signature vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11, FortiOS 7.0.0 through 7.0.17, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4.0 through 7.4.10, FortiProxy 7.2.0 through 7.2.14, FortiProxy 7.0.0 through 7.0.21, FortiSwitchManager 7.2.0 through 7.2.6, FortiSwitchManager 7.0.0 through 7.0.5 allows an unauthenticated attacker to bypass the FortiCloud SSO login authentication via a crafted SAML response message.

A vulnerability has been identified in Genexis Platinum P4410 router (Firmware P4410-V2–1.41) that allows a local network attacker to achieve Remote Code Execution (RCE) with root privileges. The issue occurs due to improper session invalidation after administrator logout. When an administrator logs out, the session token remains valid. An attacker on the local network can reuse this stale token to send crafted requests via the router’s diagnostic endpoint, resulting in command execution as root.

A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication.

Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere.

A vulnerability in an AOS firmware binary allows an authenticated malicious actor to permanently delete necessary boot information. Successful exploitation may render the system unbootable, resulting in a Denial of Service that can only be resolved by replacing the affected hardware.

An OS command injection vulnerability in user interface in Western Digital My Cloud firmware prior to 5.31.108 on NAS platforms allows remote attackers to execute arbitrary system commands via a specially crafted HTTP POST.

Update: On November 5, 2025, Cisco became aware of a new attack variant against devices running Cisco Secure ASA Software or Cisco Secure FTD Software releases that are affected by CVE-2025-20333 and CVE-2025-20362. This attack can cause unpatched devices to unexpectedly reload, leading to denial of service (DoS) conditions. Cisco strongly recommends that all customers upgrade to the fixed software releases that are listed in the Fixed Software ["#fs"] section of this advisory. A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to access restricted URL endpoints that are related to remote access VPN that should otherwise be inaccessible without authentication. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on a device. A successful exploit could allow the attacker to access a restricted URL without authentication.

A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image.

A firmware update vulnerability exists in the Firmware Signature Validation functionality of Tenda AC6 V5.0 V02.03.01.110. A specially crafted malicious file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

TrustedFirmware-M (aka Trusted Firmware for M profile Arm CPUs) before 2.1.3 and 2.2.x before 2.2.1 lacks length validation during a firmware upgrade. While processing a new image, the Firmware Upgrade (FWU) module does not validate the length field of the Type-Length-Value (TLV) structure for dependent components against the maximum allowed size. If the length specified in the TLV exceeds the size of the buffer allocated on the stack, the FWU module will overwrite the buffer (and potentially other stack data) with the TLV's value content. An attacker could exploit this by crafting a malicious TLV entry in the unprotected section of the MCUBoot upgrade image. By setting the length field to exceed the expected structure size, the attacker can manipulate the stack memory of the system during the upgrade process.

The vulnerability was identified in the code developed specifically for Lenovo. Please visit "Lenovo Product Security Advisories and Announcements" webpage for more information about the vulnerability.  https://support.lenovo.com/us/en/product_security/home

A command injection vulnerability in WebAdmin of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to adjacent attackers achieving pre-auth code execution on High Availability (HA) auxiliary devices, if OTP authentication for the admin user is enabled.

A post-auth SQL injection vulnerability in WebAdmin of Sophos Firewall versions older than 21.0 MR1 (21.0.1) can potentially lead to administrators achieving arbitrary code execution.

A vulnerability in the Software SMI handler (SwSmiInputValue 0xB2) allows a local attacker to control the RBX register, which is used to derive pointers (OcHeader, OcData) passed into power and thermal configuration logic. These buffers are not validated before performing multiple structured memory writes based on OcSetup NVRAM values, enabling arbitrary SMRAM corruption and potential SMM privilege escalation.

A vulnerability in the Software SMI handler (SwSmiInputValue 0x20) allows a local attacker to supply a crafted pointer (FuncBlock) through RBX and RCX register values. This pointer is passed unchecked into multiple flash management functions (ReadFlash, WriteFlash, EraseFlash, and GetFlashInfo) that dereference both the structure and its nested members, such as BufAddr. This enables arbitrary read/write access to System Management RAM (SMRAM), allowing an attacker to corrupt firmware memory, exfiltrate SMRAM content via flash, or install persistent implants.

A vulnerability in the Software SMI handler (SwSmiInputValue 0xB2) allows a local attacker to control both the read and write addresses used by the CommandRcx1 function. The write target is derived from an unvalidated UEFI NVRAM variable (SetupXtuBufferAddress), while the write content is read from an attacker-controlled pointer based on the RBX register. This dual-pointer dereference enables arbitrary memory writes within System Management RAM (SMRAM), leading to potential SMM privilege escalation and firmware compromise.

A vulnerability in the Software SMI handler (SwSmiInputValue 0xB2) allows a local attacker to control the RBX register, which is used as an unchecked pointer in the CommandRcx0 function. If the contents at RBX match certain expected values (e.g., '$DB$' or '2DB$'), the function performs arbitrary writes to System Management RAM (SMRAM), leading to potential privilege escalation to System Management Mode (SMM) and persistent firmware compromise.

A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure. This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior.

Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) contains an authentication bypass vulnerability that allows attackers to impersonate legitimate users without valid credentials. The vulnerability exists in the SSO authentication handling mechanism and can lead to complete administrative takeover.

An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm  in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC.

An arbitrary free vulnerability exists in the cv_close functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault3 Plus prior to 6.2.26.36. A specially crafted ControlVault API call can lead to an arbitrary free. An attacker can forge a fake session to trigger this vulnerability.

A deserialization of untrusted input vulnerability exists in the cvhDecapsulateCmd functionality of Dell ControlVault3 prior to 5.15.10.14 and ControlVault3 Plus prior to 6.2.26.36. A specially crafted ControlVault response to a command can lead to arbitrary code execution. An attacker can compromise a ControlVault firmware and have it craft a malicious response to trigger this vulnerability.

An out-of-bounds read vulnerability exists in the cv_send_blockdata functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault3 Plus prior to 6.2.26.36. A specially crafted ControlVault API call can lead to an information leak. An attacker can issue an API call to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the securebio_identify functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault3 Plus prior to 6.2.26.36. A specially crafted malicious cv_object can lead to a arbitrary code execution. An attacker can issue an API call to trigger this vulnerability.

An out-of-bounds write vulnerability exists in the cv_upgrade_sensor_firmware functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault 3 Plus prior to 6.2.26.36. A specially crafted ControlVault API call can lead to an out-of-bounds write. An attacker can issue an API call to trigger this vulnerability.

An arbitrary write vulnerability in Microsoft signed UEFI firmware allows for code execution of untrusted software. This allows an attacker to control its value, leading to arbitrary memory writes, including modification of critical firmware settings stored in NVRAM. Exploiting this vulnerability could enable security bypasses, persistence mechanisms, or full system compromise.

Memory corruption due to unauthorized command execution in GPU micronode while executing specific sequence of commands.

Memory corruption while rendering graphics using Adreno GPU drivers in Chrome.