Firmware vulnerabilities

Improper input handling in a modem-management administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

Improper input handling in a wireless-control administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

A missing authentication check in the HTTP server on TP-Link Archer NX200, NX210, NX500 and NX600 to certain cgi endpoints allows unauthenticated access intended for authenticated users. An attacker may perform privileged HTTP actions without authentication, including firmware upload and configuration operations.

A vulnerability was identified in Yi Technology YI Home Camera 2 2.1.1_20171024151200. This impacts an unknown function of the file home/web/ipc of the component HTTP Firmware Update Handler. The manipulation leads to improper verification of cryptographic signature. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is said to be difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function FMT_rebuild_diskmgr/FMT_create_diskmgr/ScanDisk_run_e2fsck of the file /cgi-bin/dsk_mgr.cgi. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_myfavorite_add/cgi_myfavorite_set/cgi_myfavorite_del/cgi_myfavorite_set_sort_info/cgi_myfavorite_remove_apkg/cgi_myfavorite_compare_apkg/cgi_mycloud_auto_downlaod of the file /cgi-bin/gui_mgr.cgi. This manipulation of the argument f_user causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used.

Improper privilege management in ThemeManager prior to SMR Mar-2026 Release 1 allows local privileged attackers to reuse trial contents.

Improper export of android application components in Secure Folder prior to SMR Mar-2026 Release 1 allows local attackers to launch arbitrary activity with Secure Folder privilege.

Improper verification of intent by broadcast receiver in Settings prior to SMR Mar-2026 Release 1 allows local attacker to launch arbitrary activity with Settings privilege. User interaction is required for triggering this vulnerability.

HMS Networks Ewon Flexy with firmware before 15.0s4, Cosy+ with firmware 22.xx before 22.1s6, and Cosy+ with firmware 23.xx before 23.0s3 have a stack buffer overflow that leads to a Denial of Service, which can also be exploited to achieve Unauthenticated Remote Code Execution.

An issue was discovered in Lantronix EDS5000 2.1.0.0R3. The HTTP RPC module executes a shell command to write logs when user's authentication fails. The username is directly concatenated with the command without any sanitization. This allow attackers to inject arbitrary OS commands into the username parameter. Injected commands are executed with root privileges.

Improper input validation in some UEFI firmware SMM module for the Intel(R) reference platforms may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable local code execution. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (high) impacts.

An unauthenticated remote attacker can use firmware images to extract password hashes and brute force plaintext passwords of accounts with limited access.

In dumpBitmapsProto of ActivityManagerService.java, there is a possible way for an app to access private information due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple functions of mem_protect.c, there is a possible way to execute arbitrary code due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple functions of ffa.c, there is a possible memory corruption due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple functions of mem_protect.c, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In __host_check_page_state_range of mem_protect.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In __pkvm_host_share_guest of mem_protect.c, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In smmu_detach_dev of arm-smmu-v3.c, there is a possible out of bounds write due to a use after free. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In multiple locations, there is a possible out of bounds read and write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Memory corruption while using alignments for memory allocation.

An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Attackers may exploit the vulnerability by specifying the value of `userInfo`. When `userInfo` is passed into the `addAuthUser` function and processed by `sscanf` without size validation, it could lead to buffer overflow.

An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Attackers may exploit the vulnerability by controlling the value of `nptr`. When this value is passed into the `getMibPrefix` function and concatenated using `sprintf` without proper size validation, it could lead to a buffer overflow vulnerability.

An issue was discovered in Tenda W20E V4.0br_V15.11.0.6. Failure to validate the value of `usbPartitionName`, which is directly used in `doSystemCmd`, may lead to critical command injection vulnerabilities.

SODOLA SL902-SWTGW124AS firmware versions through 200.1.20 contain a default credentials vulnerability that allows remote attackers to obtain administrative access to the management interface. Attackers can authenticate using the hardcoded default credentials without password change enforcement to gain full administrative control of the device.

Since the encryption algorithm used to protect firmware updates is itself encrypted using key material available to an attacker (or anyone paying attention), the firmware updates may be altered by an unauthorized user, and then trusted by a Unitree product, such as the Unitree Go2 and other models. This issue appears to affect all of Unitree’s current offerings as of February 26, 2026, and so should be considered a vulnerability in both the firmware generation and extraction processes. At the time of this release, there is no publicly-documented mechanism to subvert the update process and insert poisoned firmware packages without the equipment owner’s knowledge.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by supplying a crafted firmware update file via the firmware update route.

A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system.

A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain DCA user privileges on an affected system. This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by sending a crafted HTTP request and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges. Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability.

A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. 

A vulnerability in the API of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to overwrite arbitrary files on the local file system. To exploit this vulnerability, the attacker must have valid read-only credentials with API access on the affected system. This vulnerability is due to improper file handling on the API interface of an affected system. An attacker could exploit this vulnerability by uploading a malicious file on the local file system. A successful exploit could allow the attacker to overwrite arbitrary files on the affected system and gain vmanage user privileges.

Tattile Smart+, Vega, and Basic device families firmware versions 1.181.5 and prior implement an authentication token (X-User-Token) with insufficient expiration. An attacker who obtains a valid token (for example via interception, log exposure, or token reuse on a shared system) can continue to authenticate to the management interface until the token is revoked, enabling unauthorized access to device functions and data.

Dell Wyse Management Suite, versions prior to WMS 5.5, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote execution.

An unauthenticated stack-based buffer overflow vulnerability exists in the HTTP API endpoint /cgi-bin/api.values.get. A remote attacker can leverage this vulnerability to achieve unauthenticated remote code execution (RCE) with root privileges on a target device. The vulnerability affects all six device models in the series: GXP1610, GXP1615, GXP1620, GXP1625, GXP1628, and GXP1630.

Dell RecoverPoint for Virtual Machines, versions prior to 6.0.3.1 HF1, contain a hardcoded credential vulnerability. This is considered critical as an unauthenticated remote attacker with knowledge of the hardcoded credential could potentially exploit this vulnerability leading to unauthorized access to the underlying operating system and root-level persistence. Dell recommends that customers upgrade or apply one of the remediations as soon as possible.

FileZen contains an OS command injection vulnerability. When FileZen Antivirus Check Option is enabled, a logged-in user may send a specially crafted HTTP request to execute an arbitrary OS command.

The firmware update functionality does not verify the authenticity of the supplied firmware update files. This allows attackers to flash malicious firmware update files on the device. Initial analysis of the firmware update functionality does not show any cryptographic checks (e.g. digital signature checks) on the supplied firmware update files. Furthermore, ESP32 security features such as secure boot are not used.

Out-of-bounds write in the firmware for some Intel(R) Ethernet Controller E810 before version cvl fw 1.7.8.x within Ring 0: Bare Metal OS may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

Improper input validation for some Server Firmware Update Utility(SysFwUpdt) before version 16.0.12 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

Null pointer dereference in the firmware for some Intel(R) AMT and Intel(R) Standard Manageability within Ring 0: Kernel may allow a denial of service. Network adversary with an unauthenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

A vulnerability was identified in D-Link DIR-823X 250416. This affects an unknown function of the file /goform/set_server_settings of the component Configuration Parameter Handler. The manipulation of the argument terminal_addr/server_ip/server_port leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

A flaw was found in Keylime. The Keylime registrar, since version 7.12.0, does not enforce client-side Transport Layer Security (TLS) authentication. This authentication bypass vulnerability allows unauthenticated clients with network access to perform administrative operations, including listing agents, retrieving public Trusted Platform Module (TPM) data, and deleting agents, by connecting without presenting a client certificate.

An improper neutralization of special elements used in an sql command ('sql injection') vulnerability in Fortinet FortiClientEMS 7.4.4 may allow an unauthenticated attacker to execute unauthorized code or commands via specifically crafted HTTP requests.

Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing an excessive number of fields with zero‑length values.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.

Transient DOS when processing a received frame with an excessively large authentication information element.

In cameraisp, there is a possible escalation of privilege due to use after free. This could lead to local denial of service if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10351676; Issue ID: MSV-5737.

A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution.

An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.5, FortiAnalyzer 7.4.0 through 7.4.9, FortiAnalyzer 7.2.0 through 7.2.11, FortiAnalyzer 7.0.0 through 7.0.15, FortiManager 7.6.0 through 7.6.5, FortiManager 7.4.0 through 7.4.9, FortiManager 7.2.0 through 7.2.11, FortiManager 7.0.0 through 7.0.15, FortiNAC-F 7.6.3 through 7.6.5, FortiOS 7.6.0 through 7.6.5, FortiOS 7.4.0 through 7.4.10, FortiOS 7.2.0 through 7.2.12, FortiOS 7.0.0 through 7.0.18, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4.0 through 7.4.12, FortiProxy 7.2.0 through 7.2.15, FortiProxy 7.0.0 through 7.0.22, FortiWeb 8.0.0 through 8.0.3, FortiWeb 7.6.0 through 7.6.6, FortiWeb 7.4.0 through 7.4.11 may allow an attacker with a FortiCloud account and a registered device to log into other devices registered to other accounts, if FortiCloud SSO authentication is enabled on those devices.

Dormakaba provides the software FWServiceTool to update the firmware version of the Access Managers via the network. The firmware in some instances is provided in an encrypted ZIP file. Within this tool, the password used to decrypt the ZIP and extract the firmware is set statically and can be extracted. This password was valid for multiple observed firmware versions.